Question about 2001 Ford F150 Styleside SuperCrew
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sorry, ID10T error, posted a clarification not solution ( pictures didn't show )
Might want to check the power window motor. If you need directions on removing the door panel, Muth Co ( signal mirror manufacture ) has PDF download for the install directions that show how to get the door panel off ( if you are unsure of this ).
2001 SuperCrew directions :
Once you have the door panel off, check the motor itself, by unplugging the pig tail to the motor, and applying + and ground to the 2 pin connector. One direction will raise the window, the other will lower the motor. This is what the motor looks like out of the door, and that is the pig tail you are testing at ( this is what plugs into the factory harness )
If applying 12v directly to the motor does not raise it, you need to replace the motor.
Dealer and Napa have the motor. If you have to replace the motor, you need to use a 1" hole saw to drill the door panel to get to the motor mounts You will see dimples on the door panel, this is the location to drill :
Remove the 3 bolts ( they are more like sheet metal screws with hex heads on them), and reach up in the door opening to grasp the motor and turn anti-clock wise to remove the gear.
You can try hitting the motor against your tire, and test again. Dad's '01 Screw did the same thing, but the hitting the motor only worked for ~ 60 days.
If the testing above ( power to the motor direct ) does work, then the problem is with one of the 2 switches. Depending on use, this is usually the main driver's switch. It is ~ 65.00 to replace.
Posted on Nov 19, 2009
Yes it should be 12 volts at the pump. i have had this problem at the shop a couple of times and i replaced the inertia switch and it fixed it. Also check the connector at the inertia switch, there is high resistance in the circuit which is causing the voltage to be low.
Posted on Jan 07, 2011
Tips for a great answer:
Sep 18, 2016 | Ford Cars & Trucks
May 18, 2015 | Ford Cars & Trucks
Mar 16, 2015 | Ford Cars & Trucks
Oct 01, 2014 | Cars & Trucks
Sep 25, 2014 | 1998 Ford F150 Regular Cab
Mar 11, 2011 | 2001 Ford F150 Styleside SuperCrew
Jan 07, 2011 | 2003 Ford F150 Regular Cab
May 22, 2010 | 2001 Ford F150 Styleside SuperCrew
Jan 03, 2010 | 1997 Ford F150 Regular Cab
Feb 22, 2009 | 2001 Chevrolet Blazer
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: