Question about 1998 Ford Taurus

Open Question

I have a 1998 Ford Taurus Station Wagon with error codes P0171, P0174, P1131, P1151

Everytime I slow down, stop at a light, or turn to go into a drive way it stalls

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 116 Answers

SOURCE: 98 E-250 Rough Idle; codes p0156,p1131,p1151,p0301,p0171,p0174+

po301 thru po306 all misfire codes cylinder 1-6 remove plugs and replace them..... set the plug gap first
i suggest u replace the wires also if they never been replaced all these misfire codes can set the others and one is for the oxygen sensor ( 02s or HO2S) CIRCUT MALFUNCTION do u know how to check wireing systems
do the tune up plugs (set gap) .052-.056 change the fuel filter also. clear the codes hows it run
this info is for 98 E-250 4.2Litre
what engine do u have 4.2L or 4.6L i know it is a v-6 by the codes

Posted on Dec 15, 2008

  • 30 Answers

SOURCE: poor idle dtc P1151, P1131,P0174, P0171. runs ok

Change plugs, and Mass Air Flow sensor. This should do the trick

Posted on Nov 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy Silverado error p1151


P1151 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 2


p1131 p1151 p0171 p0174 p1131 p1151 p0171 p0174
All of these p1131 p1151 p0171 p0174 codes indicate a problem with a lean condition. This engine is known for vacuum leaks, so before you start throwing oxygen sensors at the problem, it pays to perform some diagnostics.
Start by cleaning the MAF sensor. Spray the sensor with CRC MAF sensor cleaner. Next, check the plastic vacuum lines, especially where they meet with rubber boots. If they are cracked or the rubber is swollen, replace the line. Then check the rubber elbow that holds the PCV valve. That elbow is a know failure point. In fact, the entire PCV tubing is a trouble spot on these engines. (thanks Ford).
After you've checked for vacuum leaks, check the operation of the oxygen sensors. The easiest way to do that is to disconnect the sensor from the harness. Connect one lead of your digital voltmeter to the black wire on the sensor and the other lead to battery negative. Then start the engine and add fuel (either propane, starting fluid, or carb cleaner) into the throttle body to force the mixture to rich. You should see a corresponding increase in voltage as you add fuel (from 0 volts to slightly less than 1 volt). Start and stop the fuel enrichment and watch the meter to see if the volts drop as you stop adding fuel. If you see no change, the sensor is dead. Replace it.
You can also use the fuel enrichment procedure to locate intake gasket leaks.
P1131 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 1
P1151P1151 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 2
P0174 system lean bank 2
P0171 system lean bank 1


This is the only info that didn't come back directly to FORD (yet still mentions it) instead of GM. Not to sure you got the correct code.

Jul 08, 2014 | 1999 Chevrolet Silverado 1500

1 Answer

Ford windstar trouble codes p0171-p0174- p1131-p1151-p0305


All these are fuel trim codes and fuel control O2 sensor related codes, you have something that is causing this as all the sensors seldom fail. My advice here is to see a Ford dealer for the diagnostics before any parts are replaced.

Jun 27, 2012 | 2001 Ford Windstar

2 Answers

2000 Lincoln Navigator - few days ago started idling very rough when truck is at a stop or in park. Service Engine Light came right around time I noticed that it was idling rough when stopped. Following...


P1131 Lack of HO2S-11 Switch ,Sensor Lean
P1151-Lack of HO2S-21 Switch ,Sensor Lean
PO171- System to Lean (Bank 1)
PO174-Systen to Lean (Bank 2)

Fuel Filter -Plugged
Low Fuel Pressure
Evap System -Leaks
Leaks - in ducting,air filter to throttle
PCV -Leaks
Exhaust System -Leaks
O2 Sensors-worn out

Apr 06, 2011 | 2003 Lincoln Navigator

1 Answer

1998 mercury sable wagon with the V6 Duratec engine getting a P1131 reading what is it


its running lean on bank 1, eitehr a vacuum leak, or an o2 sensor.

http://www.denlorstools.com/autoblog/2009/07/ford-p1131-p1151-fault-codes-30-dohc-o-2-diagnostics/

Sep 03, 2010 | 1998 Mercury Sable

2 Answers

1998 Mustang GT sat for over 2 years. 1/4 tank of fuel. Went to drive it and wont run off idle and dies on idle, won't start. Replaced Fuel pump, Fuel filter, Put in fresh gas with octane booster and ran...


Injectors need cleaning, As being left for time its got dirty, Run a fuel system cleaner through the fuel, Or get an professional to clean injectors for you with a high pressure unit.

Aug 11, 2010 | 1998 Ford Mustang

2 Answers

Service engine soon light on - codes P0171, P0174, P1131 and P1151 on a 2002 4.6L V8 Does this combination of codes focus on a particular emission component?


Hi, 1151 is an 02 sensor code, 1131 is also 02 sensor code,
0174 lean condition bank 2, and 0171 is lean bank 1. Either this is in need of a whosale of repairs or you have computer issues, From looking at the codes i would first do a complete tune up, Including wires, And inspect for a vacume leak before replacing any 02 sensors..
Take care

Aug 07, 2010 | 2002 Ford Explorer

1 Answer

Poor idle dtc P1151, P1131,P0174, P0171. runs ok


Change plugs, and Mass Air Flow sensor. This should do the trick

Nov 29, 2009 | 2003 Ford Taurus

3 Answers

Where is the fuel pressure regulator located on an 2002 f150 v6?


in the center of the motor,in the rear on the fuel rail

Jan 16, 2009 | 2002 Ford F150 Regular Cab

2 Answers

98 E-250 Rough Idle; codes p0156,p1131,p1151,p0301,p0171,p0174+


po301 thru po306 all misfire codes cylinder 1-6 remove plugs and replace them..... set the plug gap first
i suggest u replace the wires also if they never been replaced all these misfire codes can set the others and one is for the oxygen sensor ( 02s or HO2S) CIRCUT MALFUNCTION do u know how to check wireing systems
do the tune up plugs (set gap) .052-.056 change the fuel filter also. clear the codes hows it run
this info is for 98 E-250 4.2Litre
what engine do u have 4.2L or 4.6L i know it is a v-6 by the codes

Dec 15, 2008 | 2003 Ford E250

Not finding what you are looking for?
1998 Ford Taurus Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...