Question about 2000 Toyota MR2 Spyder

Open Question

Need to remove door panel on a 2000 mr2 - 2000 Toyota MR2 Spyder

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 2000 TOYOTA FRONT DOOR PANEL

Hi Joseph, Pull the lever for the door release open and behind it you will see a Philips machine screw. Behind it you will see a plastic swivel clip which must be released from the operating rod. Release that and remove the rod from its location. Insert a long Philips screw driver into the holes under the arm rest and remove the deep screws. (two or three, depending on the model and interior furnishings). Gently pry up the window cluster switch control from the arm rest. Detach the electrical socket by pressing on the lock release. Sneak into the kitchen and borrow the pastry knife, slipping it under your shirt or concealing it in any appropriate place, take it out to the vehicle while keeping a good look out just in case. Take the flat bladed knife from its hiding place and slide it between the door frame and the bottom of the panel. Lift it very gently towards you until you hear a pop sound. Continue along the bottom of the panel and up the sides. Once loose, lift the panel upwards and over the door locking button. Assembly is opposite. Ps, Remember to get the knife back before anyone notices that it's gone. Regards John

Posted on Sep 09, 2012

Testimonial: "I did not clearify that I was only replacing the Left Side Mirror,SORRY!It was more info.than I needed.Job Is complete and I do appreciate the input. also enjoyed the humor about the pastry knife. Joe"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1991 MR2 keys are worn to the point that they are beginning to not function. I want to get new keys cut at the dealer. They need to code that they say is on the passenger side lock cylinder. How does...


you need to remove the inner door panel, this is done by removing the screws that hold it in places, ( sometimes under plastic caps, that cover the screw, and sometimes inside the door pull handle ( that hole you pull the door shut with ) also,, along the bottom and sides there are clips Just grab the bottom of the door and pull out on it, work your way along the bottom and up both sides, to get the panel off you need to lift it up off the window edge,, also, inside the door release lever there is probably a screw, once removed, you need to turn the handle slightly and feed it back through the hole, you can get the retaining cover around the edge of the handle, by slipping a flat head screw driver inside next to the hinged end of the handle , and pop it outwards towards you , that gets you in the door, a plastic water shield covers the inside of the door,, Just peel it out of the way ,, you'll see a hole that contains the door lock cylinder, the arms to it are held on with little plastic clips,, and they get very brittle,, pop those off, you will see the items, (either a screw or bolt) that hold the cylinder in place, remove that

Jul 26, 2011 | 1991 Toyota MR2

1 Answer

2000 Toyota MR2 Spyder Pipe (from muffler) connected to 2 flex pipes is sheared off at connection to flex pipe. need schematic and how can this be repaired


Replace the entire section before and after the flex. Be sure to look into excessive engine movement, that may have caused this failure. Welds will fail again, quickly.

Sep 03, 2010 | 2000 Toyota MR2 Spyder

1 Answer

My drivers side electric window isnt working mr2


This should help you out for now. Also the BGB is there for future reference. www.mr2-tech.com/bgb/mechanical/volume2/body_electrical_system/Manual_1325_0001.jpg Good luck!
If you find its not the relay and its a motor let me know....keep me posted.

Nov 24, 2009 | 1991 Toyota MR2

1 Answer

HOW DO I REPLACE A BRAKE LIGHT ON A 1987 MR2?


Open the rear bootlid behind the engine and there are two carpet panels on each side covering the light electrics. they are held in by fastners, push each fastner at the centre to release them.
Remove the carpet panel to get access to the brake light. Twist the bulb holder and replace the bulb.
Then replace the carpet panels using the fastners.

Nov 09, 2009 | 1987 Toyota MR2

1 Answer

I have a 1989 toyota mr2 and I need to change the belt but dont know which way to go from the belt is behind the pass. side rear quarter panel


If you have an AC with your MR2, this can be pretty tight. To remove the old belt, I would just cut it off with a knife or something. Replacing the belt with a new one might be best to do from under the vehicle. There is a plastic cover panel under the car that has 3 bolts to remove it and then access is much easier to that side of the engine. These cars are worked on or fixed from the bottom in many applications. Many repairs on these little cars also require the engine to be removed to repair them as well, be prepared.

Nov 08, 2009 | 1989 Toyota MR2

1 Answer

How do i remove the rear passanger 2000buick lasabre door panel.


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

May 08, 2009 | 2000 Buick LeSabre

1 Answer

Window regulator chatters will not raise or lower window how do I replace regulator.


you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything.

Apr 15, 2009 | 1986 Toyota MR2

1 Answer

2000 lx 470 driver door panel


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Oct 11, 2008 | 2000 Lexus LX470

1 Answer

2000 ford explorer door handle


I assume you mean the drivers door. You need to remove the door panel and there are two nuts on the inside holding it on.The door panel has three retaining screws and you need to locate and remove. You then slide the door panel up and then remove it.DON'T pry the panel out you will break it.One screw is on the bottom of the panel. You should see that one. The other ones are under the door switch area and the inside door handle trim.Some have one under the remote mirror trim but not likely.That should give you access to the door handle nuts. Good Luck and I hope this helps you. Thanks Dan

Jun 21, 2008 | 2000 Ford Explorer

1 Answer

MR2 DOOR LOCK


sounds like some one tried to break into your vehicle and jammed the door locking rod this would be the most likley guess since you said motor is still working the rod will need to be pulled out and straightened again to factory bend this is critical

and your switch is on the door panel the one that says lock unlock

May 26, 2008 | 1995 Toyota MR2

Not finding what you are looking for?
2000 Toyota MR2 Spyder Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...