Question about 2001 Mitsubishi Pajero

Open Question

Abs unit to my nm pajero need help to set it up after fiiting it

Anti lock light and hand brake light comes on , then goes off when i turn steering wheel from left to right , then when i pump brakes again i lose pedal then i hear air then lights come back on

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

PyroPCMan
  • 405 Answers

SOURCE: anti lock brakes light

Good Day,

Usually that indicates bad ABS sensor or ABS component in the system. The quick fix is to locate the ABS fuse in your fuse panel, remove this fuse and abs is disabled. Your brake will function normal and it is safe to drive w/o abs until you can have it checked out, keep in mind you will lock you brakes under heavy braking conditions.

hope this helps

Posted on Jul 07, 2008

Molson02536
  • 3854 Answers

SOURCE: help change fan belts on Mitsubishi pajero

First job is to remove the 4 bolts securing the Intercooler, Its not totaly necessary to remove, but makes it a lot easier to get to the pullies.

Remove the 4 Bolts and move the Intercooler to the left hand side of the engine

Loosen off the locking bolt on the centre of the pully and then loosen the adjuster bolt until belt slackens

Loosen off the forward facing locking bolt and then loosen the adjuster bolt (Hidden behind the top hose) until belt slackens

You should now be able to remove all the belts and replace as required.

On refitting the belts adjust as required and then do up the locking bolts, refit Intercooler and check all connections (you wouldn't like the intercooler fan to fail

Its as easy as that, Good luck and not be held responsible for any 'misfortunes' in carry out the job like breaking out in to a sweat.

Posted on Apr 13, 2009

SOURCE: My endeavor 2004 Anti lock

ABS Light being on ,doesn't mean you have to
replace the pump on a 6 or 7 year old vehicle.

Could be a wheel speed sensor

Cost doesn't matter,it has be diagnosed
and resolved,it can not be safely used, as is.

Posted on Feb 22, 2011

  • 456 Answers

SOURCE: MITSUBISHI PAJERO abs brake light

hi.
it could be as simple as cleaning a sensor, or it could be as expensive as replacing the abs unit.

the most likely is a faulty sensor which would not be to expensive, but there is no way for me to even guess prices.
the only way you can know is to get the car plugged into a diagnostic unit and see what it says.

sorry i cannot be any more help, but it would be unfair of me to give any ideas of cost as it would be pure guesswork on my part until a diagnostic test tells you where the problem actually is.

Posted on Feb 26, 2011

  • 1 Answer

SOURCE: Mitsubishi Pajero, 1999, DiD, Abs and brake light on, no brakes!!

2002 Montero has high pitch sound from dash and brakes are hard

Posted on Jul 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset abs light pajero


When the ABS comes into play from heavy braking you will feel a pulsating of the brake pedal under your foot. This is the brake pressure, on off on off as the wheels stop start stop etc. The ABS will not control the vehicle direction but by allowing the wheels to turn under brakes and not lock up you have control of the steering and the direction the vehicle goes.The ABS will not stop you quicker and in fact on ice or loose surface the distance to stop will be increased. As I said all the ABS does is give you steering ability under brakes.. Take the vehicle to an accredited brake shop and have the ABS tested if you feel that it is no operating properly

Jan 02, 2014 | Cars & Trucks

1 Answer

91 Buick park avenue abs light. This happened after my friend was driving down the freeway and his tire blew. Now it just blew the rubber off and he was able to drive t off the freeway on the belts. And...


ABS LIGHT AND MODULE TROUBLESHOOTING:



Anti lock brake system light comes up when there is issue with car brake systems. It can be low brake fluid or faulty ABS fuse or its issue with brake system or assembly. Your vehicles brake system needs inspection.


To troubleshoot these issues, I suggest you to refer the help links provided below. There are direct links with accurate solution, for these specific issues.


Click the link below and follow the procedure: ------


All types of ABS LIGHT / brake problems and repairs

http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

-------------------


ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

----------------

VCS and ABS lights go on and off intermittently on Lexus?

http://howtobyme.blogspot.com/2011/11/vcs-and-abs-lights-go-on-and-off.html

-------------

The ABS and Traction Control Lights stays ON dash of car?

http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

-------------

ABS & Brake lights warning indicator steady on dash and speedometer not working for Dodge Ram?

http://howtobyme.blogspot.com/2011/11/abs-brake-lights-warning-indicator.html

-----------------------

Battery Light and ABS Light on Dash

http://whoisbyme.blogspot.in/2012/07/battery-light-and-abs-light-on-dash.html

-------------

Sometimes ABS light comes on while Driving?

http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html

-----------

How Anti-Lock Brakes Work?

http://technoanswers.blogspot.com/2011/11/how-anti-lock-brakes-work.html

-------------

Brake System Troubleshooting?

http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

-------------

Anti-lock brake light stays on all the time?

http://technoanswers.blogspot.com/2012/01/anti-lock-brake-light-stays-on-all-time.html

-------------------

ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

---------------

ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html
------------

2008 Toyota Highlander: ABS warning light Blinking and OBD Error codes Coming?

http://technoanswers.blogspot.in/2012/05/2008-toyota-highlander-abs-warning.html

--------------

2003 Lexus ES: VSC, TRAC OFF, ABS lights ON?

http://technoanswers.blogspot.in/2012/04/2003-lexus-es-vsc-trac-off-abs-lights.html

----------------

2008 Toyota Highlander Hybrid: Warning Lights Abs, Vsc & Brake Are On?

http://technoanswers.blogspot.in/2012/04/2008-toyota-highlander-hybrid-warning.html

-------------

ABS & Brake warning lights remains steady on dash?

http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html

------------

Can I drive the car without ABS fuse connected?

http://schematicsdiagram.blogspot.in/2012/02/can-i-drive-car-without-abs-fuse.html

-----------

Where is ABS/TCS module located on 2005 Cadillac Deville

http://schematicsdiagram.blogspot.com/2011/12/where-is-abstcs-module-located-on-2005.html

------------------

ABS motor keeps running?

http://schematicsdiagram.blogspot.com/2012/01/abs-motor-keeps-running.html

------------

When the car stops, abs pump turns ON?

http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html

-----------

Replacing ABS unit on Buick Century?

http://technoanswers.blogspot.in/2012/02/replacing-abs-unit-on-buick-century.html

----------------

2008 Toyota Tacoma: ABS causes Brake pedal fade?

http://technoanswers.blogspot.in/2012/04/2008-toyota-tacoma-abs-causes-brake.html

--------------

Toyota Camry: Premature ABS Actuation?

http://technoanswers.blogspot.in/2012/04/toyota-camry-premature-abs-actuation.html

-----------

How to replace ABS Modulator Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-modulator-control.html

----------------


How to replace ABS Pump Assembly on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-pump-assembly-on.html

-----------


How to remove ABS Accumulator on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-accumulator-on-acura.html

---------


How to remove ABS Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-control-unit-on-acura.html

------------

These details will help.

Thanks.

Feb 04, 2013 | Cars & Trucks

2 Answers

Esp and abs light on in 2009 ford transit how do i eliminate them


Anti lock brake system light comes up when there is issue with car brake systems.It can be low brake fluid or faulty ABS fuse or its issue with brake system or assembly.Your vehicles brake system needs inspection.

To troubleshoot these issue,i suggest you to refer the help links provided below.There are direct links with accurate solution,for these specif issue.

Click the link below and follow the procedure:------

All types of ABS LIGHT / brake problems and repairs

http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

-------------------


ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

----------------
VCS and ABS lights go on and off intermittently on Lexus? http://howtobyme.blogspot.com/2011/11/vcs-and-abs-lights-go-on-and-off.html
-------------
The ABS and Traction Control Lights stays ON dash of car? http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

------------- ABS & Brake lights warning indicator steady on dash and speedometer not working for Dodge Ram?

http://howtobyme.blogspot.com/2011/11/abs-brake-lights-warning-indicator.html

-----------------------
Battery Light and ABS Light on Dash http://whoisbyme.blogspot.in/2012/07/battery-light-and-abs-light-on-dash.html

-------------
Sometimes ABS light comes on while Driving? http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html
----------- How Anti-Lock Brakes Work?

http://technoanswers.blogspot.com/2011/11/how-anti-lock-brakes-work.html

-------------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

-------------
Anti-lock brake light stays on all the time?

http://technoanswers.blogspot.com/2012/01/anti-lock-brake-light-stays-on-all-time.html

-------------------

ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

---------------
ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html
------------

2008 Toyota Highlander: ABS warning light Blinking and OBD Error codes Coming?

http://technoanswers.blogspot.in/2012/05/2008-toyota-highlander-abs-warning.html

--------------


2003 Lexus ES: VSC, TRAC OFF, ABS lights ON?

http://technoanswers.blogspot.in/2012/04/2003-lexus-es-vsc-trac-off-abs-lights.html

----------------
2008 Toyota Highlander Hybrid: Warning Lights Abs, Vsc & Brake Are On?

http://technoanswers.blogspot.in/2012/04/2008-toyota-highlander-hybrid-warning.html

-------------


ABS & Brake warning lights remains steady on dash? http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html



------------
Can I drive the car without ABS fuse connected? http://schematicsdiagram.blogspot.in/2012/02/can-i-drive-car-without-abs-fuse.html

-----------
Where is ABS/TCS module located on 2005 Cadillac Deville

http://schematicsdiagram.blogspot.com/2011/12/where-is-abstcs-module-located-on-2005.html

------------------
ABS motor keeps running? http://schematicsdiagram.blogspot.com/2012/01/abs-motor-keeps-running.html

------------
When the car stops, abs pump turns ON? http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html

-----------
Replacing ABS unit on Buick Century? http://technoanswers.blogspot.in/2012/02/replacing-abs-unit-on-buick-century.html

----------------
2008 Toyota Tacoma: ABS causes Brake pedal fade? http://technoanswers.blogspot.in/2012/04/2008-toyota-tacoma-abs-causes-brake.html
-------------- Toyota Camry: Premature ABS Actuation? http://technoanswers.blogspot.in/2012/04/toyota-camry-premature-abs-actuation.html

-----------

How to replace ABS Modulator Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-modulator-control.html

----------------


How to replace ABS Pump Assembly on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-pump-assembly-on.html

-----------


How to remove ABS Accumulator on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-accumulator-on-acura.html

---------


How to remove ABS Control Unit on Acura Integra?
http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-control-unit-on-acura.html

------------
These details will help.
Thanks.

Nov 24, 2012 | Ford Transit Connect Cars & Trucks

1 Answer

Fuses panel described in English


Hope this helps your out. I know the diagram and locator is a bit blurry but hopefully it gets what you need.
Drivers kick panel:
Front wiper 20A - Front wiper system Cigar 15A- Cigarette lighter Audio 10A- Audio, remote control mirror Air Bag 10A -Air bag diagnostics Stop lights- 15A -Rear brake light, high mounted stop light ECU B+ 10A - Shift lock actuator, transaxle controle module, radio, engine control module Room 10A - Interior light, clock, ignition key reminder, rear cargo area light switch ABS 10A- Anti lock brake system control unit ECU IG1 10A - Transaxle control module, shift lock actuator, ABS control unit, DRL unit Meter 10A - Instrument panel, back-up switch, electronics time control module, inhibit switch Turn signal 10A- Hazard switch ,front and rear turn lights, turn indicator IGN1 20A - Ignition switch ABS 30A- ABS pump motor TNS 30A- Tail light, license plate light COOL/FAN 30A- Cooling fan Cond/Fan 20A- A/C condenser fan Starter 15A- Start signal , Fuel pump Blower 25A- Blower Motor SR/ACC 10A - Ignition switch Hazard 15A - Hazard and turn signal light D/Lock 25A- Door locks ABS 30A - Anti lock brake system control P/W RH 20A- Power window motor right hand P/W LH 20A- Power window motor left hand IGN2 25A- Ignition Switch
Engine compartment :
Head 25A- headlights IG 2 30A- Ignition switch IG coil 15A -Ignition coil, condenser,generator IC regulator, diagnostic connector. O2 down 10A- Rear O2 sensor O2 up 10A- Front O2 sensor Fuel pump 10A -Fuel pump unit Injector 10A -Fuel injector ,camshaft positioning sensor, purge solenoid valve, EVAP, IAC actuator, Mass Airflow sensor, EGR stepper motor. fuel pump relay coil, vehicle speed sensor. A/Con 10A - A/C compressor controls, cooling fan BTN 30A- Brake light , high mounted stop light. Tail light LH 10A- License plate light, tail light , rear combo light, instrument panel illumination Tail light RH 10A-License plate light, tail light , rear combo light, instrument panel illumination Head low 15A- Headlight Head Hi 15A-Headlight Horn 15A- Horn jlmacman.png jlmacman_0.png

Inside kick panel jlmacman_1.png

Mar 07, 2011 | 1995 Kia Sephia

2 Answers

My ABS light is on and off on a 2006 Mercury Mariner. Do I need to do something to get this light to stay off


SECTION 206-09: Vehicle Dynamic Systems 2006 Escape/Mariner/Escape Hybrid/Mariner Hybrid Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 03/29/2005 Anti-Lock Control adobe.gif Printable View (63 KB) The ABS consists of the following components:
  • Hydraulic control unit (HCU)
  • Anti-lock brake control module
  • Front and rear wheel speed sensors
  • Front and rear wheel speed sensor rings
  • Stability control sensor cluster
  • Stability/traction control switch
The ABS prevents wheel lock-up by monitoring the wheel speed sensors and actuating the HCU modulating the brake pressure to prevent wheel lockup. By preventing the wheels from locking up, the driver is able to maintain steering control and stop in the shortest possible distance under most conditions. The traction control system utilizes the same components as the ABS to prevent wheel spin and help maintain vehicle control during acceleration. The roll stability control (RSC) system utilizes the same components as the ABS and the traction control systems and also monitors the steering wheel position sensor and the stability control sensor cluster to assist in stabilizing the vehicle during abrupt maneuvers.
--------------------------------------------------------------------------------------------------------------------------------------
The ABS module is self monitoring. The module will carry out a preliminary electrical check of the hydraulic pump motor by turning the pump ON for approximately 1/2 second either when the ignition switch is turned to the RUN position and the brake pedal is not pressed or when the vehicle is in motion and at vehicle speeds above 20 km/h (12 mph). The ABS module will also carry out a wheel speed sensor self-test by sending a reference voltage to all of the wheel speed sensors through their circuitry when the ignition switch is turned to the RUN position, with or without brake pedal application. If a malfunction is detected in the pump or wheel speed sensors, the ABS module will shut down and disable the anti-lock system. Normal power assisted braking, however, remains.
---------------------------------------------------------------------------------------------------------------------------------------------


Visual Inspection Chart
Mechanical Electrical

  • Base brake system
  • Brake booster vacuum hose
  • Hydraulic control unit (HCU)
  • Steering components and suspension components
  • Tire size
  • Wheel speed sensor ring
  • ABS module
  • Battery junction box (BJB) fuse(s):
    • 19 (40A)
    • 22 (40A)
  • Brake fluid level switch
  • Brake pressure transducer
  • Smart junction box (SJB) fuse(s):
    • 6 (15A)
    • 34 (5A)
  • Stoplamp switch
  • Wheel speed sensor
  • Wiring, terminals or connectors


You may need to have the dealer run a scan test to determine the DTC fault codes. Then go from there. Autozone can't read these codes as tehy are chassis codes. They only can read powertrain codes.

Good luck. please rate.

Jan 25, 2011 | Mercury Mariner Cars & Trucks

1 Answer

My anti-rear lock light and brake light came on and the brake pedal goes to the floor.....is it more than changing the brakes?


ANTI LOCK BRAKE LIGHT AND BRAKE LIGHT COMES ON YOU HAVE BRAKE FAILURE.NOT SAFE TO DRIVE.YOU HAVE LEAKING BRAKE LINE OR LEAKING BRAKE CALIPER OR WHEEL CYLINDERS.THE MASTERCYLINDER OR ABS UNIT FAILED.DONT DRIVE VECHICLE NOT SAFE.

Jan 09, 2011 | 1992 Isuzu Pickup

4 Answers

What does the abbreviation ABS mean on my Dash Board of a 1996 Nissan Frontier King Cab truck?


It stands for Anti-lock braking system, and the reason the ABS warning light is on is due to a problem with the ABS system

Sep 20, 2010 | 1998 Nissan Frontier

1 Answer

2001 Alero - anti-lock brake light warning light won't go out - had brakes replaced - is there a re-set button?


no reset button.have the car anti-lock brake system scanned.to check code.because when anti - lock brake light come on.it can be many things.like faulty wheel sensor.faulty relay or the anti - brake unit low on brake fluid or the abs unit faulty.

Nov 28, 2009 | 1999 Oldsmobile Alero

3 Answers

Replace front wheel bearing is it hard to do on 2002 alero


its actually pretty easy if you have the basic tools needed and a little mechanical knowledge, because i dont think you can buy just the bearing at a auto parts store. they sell you the whole hub assembly which is great for the DIYer.

lift the car off the ground and block it from rolling and place a jack stand under it so it cant fall on anyone.


Wheel Bearings printpage_icon.gif

Removal & Installation

These vehicles are equipped with sealed hub and bearing assemblies. The hub and bearing assemblies are non-serviceable. If the assembly is damaged, the complete unit must be replaced.
  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove or disconnect the following:
    WARNING DO NOT allow the caliper to hang unsupported from the brake hose.


    Front wheel Halfshaft nut and washer Caliper from the steering knuckle and support it aside


    Brake rotor Anti-lock Brake System (ABS) connector, if equipped 3 hub/bearing assembly bolts Halfshaft from the hub/bearing assembly Hub/bearing assembly

    0900c1528023b277.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Exploded view of the front hub/bearing assembly


To install:
Install or connect the following:

Hub/bearing assembly onto the halfshaft, making sure the splines engage smoothly Hub/bearing assembly to the steering knuckle. Torque the bolts to 70 ft. lbs. (95 Nm). Anti-lock Brake System (ABS) connector, if equipped Brake rotor Caliper onto the steering knuckle. Torque the bolts to 38 ft. lbs. (51 Nm). Halfshaft nut. Torque the hub nut to 284 ft. lbs. (385 Nm) on nuts colored black, or 173 ft. lbs. (235 Nm) on gray colored nuts. Front wheel. Torque the nuts to 100 ft. lbs. (140 Nm).

Jul 27, 2009 | 2004 Oldsmobile Alero

1 Answer

Problem with my cruise control and ABS light on 03 Explorer


Anti-Lock Control —Vehicles Built After 03/2002 The 3-channel anti-lock brake system consists of the following components:
  • front wheel speed sensors
  • front wheel speed sensor rings
  • hydraulic control unit (HCU)
  • Anti-lock brake control module (ECU)
  • rear wheel speed sensor
  • rear wheel speed sensor rings
  • yellow anti-lock brake warning indicator
The 4-channel anti-lock brake system with traction control and stability assist system consists of the following components:
  • active brake booster with integral solenoid
  • brake booster release switch
  • front wheel speed sensors
  • front wheel speed sensor rings
  • hydraulic control unit (HCU)
  • stability assist module (ECU)
  • stability assist event indicator
  • lateral accelerometer
  • longitudinal accelerometer (4x4)
  • rear wheel speed sensors
  • rear wheel speed sensor rings
  • steering wheel position sensor
  • yaw rate sensor
  • yellow anti-lock brake warning indicator
  • brake pressure transducer
  • traction control switch
---------------------------------------------------------------------
I suspect the abs issue is causing the speed control not to work if it happened at the same time the cruise control stopped working. When the yellow ABS light comes on, it means the ABS is dactivated. You may have a faulty accelerometer which senses acceleration and yaw (side to side lean). I have not seen a bad one but you said it is sensitive to acceleration.
I would unplug it and see what happens. The connector should have a small tab to depress so you can pull the connector out.
Here is where it is:

Accelerometer Removal and Installation
  1. NOTE: The accelerometer is located under the center, rear passenger seat carpet. (I think you have to remove seat for access).
    Cut the carpeting along the perforations.
  1. Disconnect the electrical connector.
  1. Remove the nuts and remove the accelerometer.
cd31596.gif
Have dealer hook up tester and pull fault codes if you can't find an easy solution.
Some background info
  • A malfunction in the anti-lock brake system will cause the anti-lock brake control module to shut off or inhibit the system. However, normal power-assisted braking remains.
  • Malfunctions are indicated by the yellow ABS warning indicator in the instrument cluster.
  • The anti-lock brake system is self-monitoring. When the ignition switch is turned to the RUN position, the anti-lock brake control module will carry out a preliminary self-check on the anti-lock electrical system indicated by a three-second illumination of the yellow ABS warning indicator in the instrument cluster.
  • During vehicle operation, including normal and anti-lock braking, the anti-lock brake control module monitors all electrical anti-lock functions and some hydraulic operations.
  • Each time the vehicle is driven, as soon as vehicle speed reaches approximately 20 km/h (12mph), the anti-lock brake control module turns on the pump motor for approximately one-half second. At this time, a mechanical noise may be heard. This is a normal function of the self-check by the anti-lock brake control module.
  • Pedal pulsation coupled with noise while braking on loose gravel, bumps, wet or snowy roads is normal and indicates correct functioning of the anti-lock brake system.
  • Warning Lamp Indicator
    The anti-lock brake system (ABS) uses the yellow ABS warning indicator to alert the driver of a malfunctions in the ABS.
    The yellow ABS warning indicator will come on to warn the driver that the ABS has been turned off due to a symptom that exists in the ABS. Normal power assist braking remains but wheels can lock during a panic stop while the yellow ABS warning indicator is illuminated.

    -----------------------------------------
    Please report back, I am curious if that is what it is. Good luck

    Mar 03, 2009 | 2003 Ford Explorer

    Not finding what you are looking for?
    2001 Mitsubishi Pajero Logo

    Related Topics:

    22 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7772 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...