Question about 2000 Ford Explorer

1 Answer

The windshield washer not add water - 2000 Ford Explorer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,909 Answers

If your windshield washer won't squirt here are some ideas and I hope they work. Where the fluid shoots out on the windshield are the little holes clean sometimes they fill with gum and dirt. Are all the hoses from the unit itself open and free of dirt. If its freezing could be froze up. If all that is ok make sure the pump is running when you push the button. If not check the fuses. If they are ok could be the pump itself.

Posted on Feb 09, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I put windshield fluid in on a 2004 montero


Here's a video showing you how to add windshield fluid,will make you watch a commercial,lol. Add Windshield Washer Fluid Mitsubishi Montero Sport 1997 2004 1997...

Aug 10, 2015 | 2004 Mitsubishi Montero Sport

1 Answer

How do you replace the windshield washer pump on 2008 ford focus, wipers work but no spray comes out


The hose could be clogged ! Do you know where you add the washer fluid ? Somewhere on the bottom of that plastic bottle is the washer pump .
Removal and Installation
> WARNING: Windshield washer solution contains methanol, which is poisonous. Observe all cautions and warnings indicated on label of washer solution container. Failure to follow these instructions may result in personal injury.
> CAUTION: When replacing the windshield washer pump be careful not to damage the rubber grommet.
> CAUTION: Do not operate the windshield washer pump before filling the reservoir. Failure to do so could result in premature pump failure.
  1. NOTE: When installing the reservoir, the filler neck must be lubricated using a water-based lubricant.
    Remove the bolt and the windshield washer reservoir filler neck.
  1. Remove the RH fender splash shield. For additional information, refer to Section 501-02 .
  1. Remove the foam filler and remove the retainer.
  1. Remove the 2 screws and the accessory drive splash shield.
    • To install, tighten to 5 Nm (44 lb-in).
  1. Remove the nut, 2 bolts and position the A/C accumulator aside.
    • To install, tighten to 9 Nm (80 lb-in).
  1. Unclip the A/C lines from the inner fender well.
  1. Drill out the rivet and remove the bracket.
  1. Remove the 2 bolts, slide the windshield washer reservoir assembly forward to release it, and position the washer reservoir aside.
    • Install the upper bolt followed by the lower bolt, and tighten to 5 Nm (44 lb-in).
  1. Disconnect the windshield washer tube assembly from the pump and release the windshield washer tube assembly from the washer reservoir.
  1. Disconnect the electrical connector from the windshield washer pump.
  1. Release the wiring harness from the reservoir, and remove the washer reservoir.
  1. To install, reverse the removal procedure.

Apr 07, 2015 | Ford Cars & Trucks

2 Answers

Where is the windshield washer pump located under the hood?


it locate in tthe bottom of windshield water reservoir(tank)

Mar 04, 2015 | Chrysler PT Cruiser Cars & Trucks

2 Answers

I have a 2005 Jeep Grand Cherokee, and the windshield wiper fluid doesn't come out on either the front or back window. The washer fluid deposit is full and you can slightly hear the motor. Is there a way...


When the temperature gets below freezing and you use a bargain windshield washer fluid or plain water, it freezes and won't work. I normally drain every drop, not just add to what's already in there, and refill with Prestone yellow windshied washer fluid that has a lower freezing point.etort

Feb 11, 2015 | 2005 Jeep Grand Cherokee

1 Answer

Frozen winshield washer lines


Find a heated garage, you need to thaw out he lines, or use a hair dryer if you can follow the line path. When working, drain all the fluid by holding down the spray button on the car. Go and buy he heavy duty washer fluid with the lowest freezing point you can buy and refill your washer reservoir with it. Don't add any water Most likely you had water in the reservoir and it froze.

Jan 20, 2013 | 1998 Ford Taurus

2 Answers

Windshield washers not pumping water to windshield


The most common problem I find in this season, is having summer 32 deg. F freezing windshield wiper fluid in the tank rather than -20 deg. F freezing windshield wiper fluid.

Try to warm up the car by parking it in a heated garage until the windshield wiper fluid thaws. Then, try to use it all up, and add the 'winter' vs. the 'summer' formula of windshield wiper fluid.

If this does not solve the problem, the pump might be burnt out, in my experience.

You should hear a humming sound as you depress the button for windshield wiper fluid inside of the car.

Good luck on this repair.

Jan 01, 2011 | 1999 Mercedes-Benz E-Class

1 Answer

Where do I add the windshield wiper fluid?


if you open the hood. Either on the left or right side near the headlight you should see a blue cap with a picture of a water spraying onto a windshield. remove blue plastic cap and just add until full(add windshield washer fluid only). The cap is blue covering a white plastic tube. good luck.

Dec 15, 2010 | 2001 Honda Civic

2 Answers

What liquids go in each resevoir?


Coolant in 50% concentration goes into the coolant overflow bottle. Windshield wiper fluid into the wiper fluid bottle. Power steering fluid into the power steering fluid bottle.
You do not need to add any other fluids to these. Do not add water to the washer fluid bottle for example, if you drive in a climate that would allow it to freeze.

Dec 21, 2009 | 2002 Lincoln LS

1 Answer

Windshield fluid frozen how do i unfreeze the windshield fluid


Well you can pour hot water in the resivor, and when it melts, make sure you use it, till it runs dry...And then make sure you put the proper windshield washer fluid in the resivor...Do not add any water...because your typical fluid will not freeze...but when you add water, it will freeze...

Dec 12, 2009 | 1999 Oldsmobile 88

Not finding what you are looking for?
Cars & Trucks Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...