Question about 2003 Chrysler Town & Country
Need the diagram for the hoses
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Could be the gas cap. Do you fill the tank with the engine running?
Otherwise, check the hoses near the Evap canister. I have 2003 T&C and had the small leak and large leak codes. I looked at the evap cansiter and the hose coming from the fuel tank vapor line had a huge crack in it, to the point it had fallen off the evap caniser. I trimmed the end of the hose and reconnected and voila, no codes.
The evap canister is on the driver's side of the van, underneath, slightly behind the drivers seat.
BTW, to clear the codes without an OBDII reader, remove the negative cable for 5-10 minutes (15 to be safe). The computer resets and clears the codes, except for one that it sets saying loss of power to the memory.
Posted on Jan 24, 2009
I've done this many times
You will need a tubing cutter
I think a 7 or 8mm socket
the appropriate amount of heater hose
cut the steel heater line at the front in a place you can get access to,leave yourself enough steel hose on the rear to allow you to put the heater hose on cut off the steel hose and discard, and use 2 hose clamps on either end do the same for the other heater hose,this way is cheap and easy and permanant.Be sure that when you run the heater hose keep it away from hot or moving parts,use the zip ties to fasten it along the way,this should take about a half hour or so depending on your skills and working conditions,remember to buy some antifreeze to top up the system because you are going to spill some,remember to clean any spills animals love it and it is deadly.
Posted on Apr 16, 2009
the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays
Posted on May 08, 2009
Tips for a great answer:
Nov 29, 2013 | 2001 Chrysler Town & Country
Feb 01, 2013 | Cars & Trucks
Jan 03, 2013 | Chrysler Town and Country Cars & Trucks
Sep 03, 2012 | 2003 Chrysler Town & Country
Aug 13, 2012 | 2001 Chrysler Town & Country
Mar 10, 2012 | 2002 Chrysler Town & Country
Feb 20, 2011 | 2001 Chrysler Town & Country
Oct 24, 2010 | 2001 Isuzu Rodeo
Dec 01, 2009 | 2001 Chrysler Town & Country
132 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: