Question about 1992 Oldsmobile Cutlass Ciera

Open Question

Wont start and back fires

Died know it wont start and back fires

Posted by on

  • Mike R
    Mike R Feb 15, 2014

    ts got new timing chain ,ignition module, new coil packs plugs and wires, and new crank sensor

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 95 tahoe i was driveing home from work and it died on me at 55mph, i cranked it while driveing and it fired back up, within a few miles it died again and would not start, still wont start


You need to check it for spark and fuel and go from there. If you have questions on how to test let me know. Don't start throwing away money in parts for it.

Nov 27, 2015 | Cars & Trucks

1 Answer

Car stalled and died. Cranks but wont start all of the sudden.


You will need to see if you are getting spark to the spark plug. You can remove plug cable a d insert a screw driver and place metal of screw driver within 1/8 of an inch from metal on engine or car. Have someone try to start the engine while watching the gap for spark. Make sure you have good connection in cable. If no spark, then it may be distributed.

Jun 11, 2013 | 2004 Nissan XTerra

1 Answer

My 1992 honda accord ex just died on me turns over back fires but wont start


Hi, it is likely you need a new timing belt. Please let us know if you would like instructions, and thanks for using FixYa.

Jan 27, 2011 | 1992 Honda Accord

2 Answers

Went through a puddle. Car died. Restarted a day


See these items:-

The starter must have been bad due to the water.

Bad PCM or ignition coil.

Corroded battery cables.

See timing belt.

Good luck

Feb 28, 2010 | 1997 Volkswagen Jetta

1 Answer

My 95 lexus gs 300 wont start


Try to replace the fuel filter and then check the spark plugs. Mke sure to clean the spark plugs and after you clean the spark plugs and still the same it wont start replace the spark plugs and check the distributor as well.

Feb 02, 2010 | 1995 Lexus GS 300

1 Answer

Jeep wont start


The crank position sensor is on the bell housing of the transmission, very hard to see, on passenger side, below the valve cover, depending if it is an early 2000 or a later 2000 model.

Mar 31, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Wont start after it died one night


The cap should be marked for number 1. The distributor turns clockwise. The firing order is 1-3-4-2.

Mar 22, 2009 | 1986 Honda Civic

Not finding what you are looking for?
1992 Oldsmobile Cutlass Ciera Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...