Question about 2007 Chevrolet Equinox LS

Open Question

When I try to open my liftgate on my 2007 equinox it won't open

When I try to open the liftgate on my 2007 equinox it will not come open

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: liftgate opens only partially on 2007 tahoe

try removing your shocks/struts for the lift gate. once removed, check to see if they fully extend in and out of the barrel. You may have bent shocks/struts. Also, check to see there is nothing preventing the lift-gate from opening such as a bolt or acorns between the spoiler and the roof...

Posted on Jul 01, 2009

  • 1 Answer

SOURCE: The liftgate on my 2005

I am unable to unlock my 2005 Chevy Equinox with either the remote or the key.... what is going on? What should I do?

Posted on Feb 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear hatch keeps opens while driving...


Unless you have electrical diagnostic skills , I suggest you take this to the dealer ! The lift gate can be opened by operating the switch on the instrument panel. Battery voltage is supplied to the liftgate actuator through the body control module (BCM). The BCM will pulse the lift gate actuator when a release input is received through the key fob, or the instrument panel switch.
The body control module (BCM) receives an input from the liftgate ajar assembly. The ajar assembly is normally open when the liftgate is fully closed. When the liftgate is opened, the ajar assembly contacts close providing a path to ground. The driver information center (DIC) illuminates the rear access open message when the gate is open. The instrument panel cluster (IPC) receives a serial data message from the BCM indicating the liftgate ajar status. If this message is displayed and the vehicle speed is greater than 8 km/h (5 mph), a chime will sound.
It could be ajar switch is bad .

Dec 16, 2015 | 2012 Chevrolet Equinox LS 4dr SUV 2.4L...

1 Answer

Where is the manual liftgate sensor located 2009 Equinox


The liftgate can be opened by operating the switch on the instrument panel. Battery voltage is supplied to the liftgate actuator through the body control module (BCM). The BCM will pulse the liftgate actuator when a release input is received through the key fob, or the instrument panel switch.
Not sure what your talking about . There is no sensor. there is a relay in the I/P fuse box LIFTGATE PCB relay . an a lift gate actuator motor inside the door . An there is a door ajar switch ,which is part of the latch mechanism. Do you have light lit on the instrument cluster - a picture of a little car with a door open , an maybe a chime sounding ?

Not

Aug 01, 2015 | 2009 Chevrolet Equinox

1 Answer

2007 yukon,lift gate will not open electrically or manually?


You should still be able to open itmanually? Unless the lock is not functioning. There may be a plastic plug that pops off on the inside of the liftgate panel so that you can open it. You have to remove the plug and then move the lever with a screw driver. All that being said most likely have some broken wires in the boot at the top of the liftgate where it connects to the body. These wires tend to break from constant flexing when the liftgate is opened and closed. Either way you have to get the liftgate open to inspect them

Feb 17, 2015 | 2007 GMC Yukon

1 Answer

What fuse is for the liftgate in a 2005 Pacifica?


I'm not sure how this question for a 2005 Chrysler Pacifica ended up in a Chevy Equinox Fixya forum but I used to live in Pacifica, CA so I did some research for the heck of it.

From another post in a different forum, I read that it's powered by fuse 11 in the engine compartment. I found some other stuff as well.

I read that there is a possibility of the liftgate connector being loose under the left tailight that could affect the defroster, the liftgate, the movement warning 'dinger' or all.

I read somewhere else that the emergency release is under a 1 inch plug at the bottom of the liftgate trim, on the inside of the car.

Please use this info with extreme caution. I don't actually have any first hand knowledge of the Pacifica, only did some searching. If none of what is listed above matches what you have in your car, please consult a licensed mechanic or Chrysler dealership for clarification. Best of luck.

Jun 03, 2014 | 2007 Chevrolet Equinox LS New Cars

1 Answer

Power liftgate will not open with remote, instrument panel control or button in rear cargo on lincoln mkx


It can be faulty switch or its issue with lift gate latch.Its got stuck up hard or cracked inside.It has to be inspected.-----------
There are few help links with proper solutions for these problem.I suggest you to refer the links.
Click the link below:----
2007 Mercury Mountaineer: Liftgate will not Unlock or Open? http://whoisbyme.blogspot.in/2012/06/2007-mercury-mountaineer-liftgate-will.html
------------
Adjust Hydraulic Lifters? http://schematicsdiagram.blogspot.in/2012/04/adjust-hydraulic-lifters.html
-----------
How to open rear lift gate? http://repairhelpcenter.blogspot.com/2011/12/how-to-open-rear-lift-gate.html

--------- Power Liftgate Shuts Down http://whoisbyme.blogspot.in/2012/07/power-liftgate-shuts-down.html
------------ Power Lift Gate Will Not Remain Open http://whoisbyme.blogspot.in/2012/07/power-lift-gate-will-not-remain-open.html
----------- Power Lift-gate will not Operate http://whoisbyme.blogspot.in/2012/07/power-lift-gate-will-not-operate.html
------------- Liftgate will Not Stay Up Open? http://whoisbyme.blogspot.in/2012/07/liftgate-will-not-stay-up-open.html

---------------- Rear Door will not open http://whoisbyme.blogspot.in/2012/07/rear-door-will-not-open.html
------------ 2000 Toyota Corolla: Rear Door wont open from outside or inside? http://whatisbyme.blogspot.in/2012/05/2000-toyota-corolla-rear-door-wont-open.html

--------------

These details will help.
Thanks.

Nov 25, 2012 | 2007 Lincoln MKX AWD

2 Answers

I have a 2007 Suburban, and the lift gate opens up about 1/4 the way and then drops to the closed position. This happens regardless of how it's opened.


{: ) Your liftgate struts (shocks) could have gone weak. If it's a power liftgate, press the off button to disable the power liftgate function, so that you can open the liftgate manually. With a little help from you, extend the liftgate at full open position and check if it will hold itself up there as it normally should. If it starts to fall off as you catch it, that means the liftgate struts don't have enough pressure anymore to push and sustain the weight of the liftgate. Check for signs of leak on the struts, or better if you can replace it both.

Aug 02, 2011 | 2007 Chevrolet Suburban Three-Quarter-Ton...

1 Answer

I just bought an equinox 2005 LS and I dont know how to lock the rear door.


To unlock the liftgate, press the unlock button on the Remote Keyless Entry (RKE) transmitter twice or use the power door lock switch.
To lock the liftgate, press the lock button on the RKE transmitter or use the power door lock switch. The liftgate does not have a key lock cylinder.
To open the liftgate, pull up on the handle located in the center of the liftgate.
When closing the liftgate, use the molded handles to pull the liftgate down. Push the liftgate closed until it latches.

Jul 08, 2011 | 2005 Chevrolet Equinox

1 Answer

Liftgate opens only partially on 2007 tahoe


try removing your shocks/struts for the lift gate. once removed, check to see if they fully extend in and out of the barrel. You may have bent shocks/struts. Also, check to see there is nothing preventing the lift-gate from opening such as a bolt or acorns between the spoiler and the roof...

Jun 22, 2009 | 2007 Chevrolet Tahoe

1 Answer

Liftgate hydraulics not working


check the ff.
1. check the liftgate button if its properly working by listening to a clacking sound if not then the solinoid is not functioning or check the liftgate hydraulic retainer (shock absorber like) if its pushing or not if not then the retainer lost its hydraulic pressure, bring your car to the dealer and check if its still under warranty... and get it replaced.

Apr 30, 2009 | 2007 Chevrolet Equinox LS New Cars

Not finding what you are looking for?
2007 Chevrolet Equinox LS Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...