Question about 2000 Dodge Stratus

Open Question

Cant find adjustment to get the serpentine belt back on

Cant find any adjustment to put the serpentine belt back on

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 69 Answers

SOURCE: FIRST TOOK ALT OFF BELT

Look @ Autozone.com under repair then input your vehicle info ,they have lots of info free!!
Hope this helps!
Dan

Posted on Feb 28, 2011

Ad
murf427
  • 336 Answers

SOURCE: cant get new serpentine belt back on 92 dodge stealth

The belt tensioner should be spring loaded. you release the pressure with a wrench. install the belt with the tensioner in the proper position.
murf427

Posted on Aug 04, 2012

emissionwiz
  • 76649 Answers

SOURCE: putting the serpentine belt back on

Yopu can look that up here

Posted on Oct 15, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get serpintine belt back on altenator


Friend,
The serpentine belt does not have to be above the pulley. It could very well be below it. So, try setting it below the alternator. Also if the problem is only of setting it then you have to loosen the bolt on the alternator and then tighten it again after adjusting the belt over or under the pulley. The tension adjustment bolt is always there on the alternator.

Oct 03, 2010 | 2004 Ford F350

1 Answer

Cant get serpentine belt on my truck


Try putting the belt on the alternator then slide it under the idler pulley last.

Feb 23, 2010 | 1994 Ford Ranger Supercab

1 Answer

Ho to replace serpentine belt. cant find anything


There probably won't be any adjustments. Serpentine Belts have be used for 25 or 26 years to my memory ,and have spring loaded tensioners to keep belt tight. So I quess your new to the car world. You release the tension with a long 1/2" Drive ratchet or tool specific for belt replacement. If you need to buy any tools you don't have, your better off leaving it to the pros

Oct 01, 2009 | 2004 Hyundai Santa Fe

2 Answers

2000 Lincoln How do you adjust the tension on the motor serpintine belt ?


You don't...I mean you can't adjust the serpentine belt because there is automatic self tensioner which loaded by a very high compression spring. Now, there should be a square hole on the tensioner which is a 1/2 inch. You simply put a half inch breaker bar in the square hole to gain leverage in order to change your belt. Hopefully this helps

Jul 07, 2009 | 2000 Lincoln Continental

1 Answer

I cant remove the serpentine belt


Look for a hole you can fit the square end of a ratchet in. Should be a 3\8 or 1\2 inch drive. Or it's a pulley with a spring in it. It will look like it's on a lever type thingy. Just put a wrench on the bolt in the middle of the pulley turn to the left, bolt turns, wrong one, pulley moves, right one. Don't forget to take a pic of the belt so you know how to put it back on.

Apr 23, 2009 | Mercedes-Benz 300-Class Cars & Trucks

1 Answer

Need serpentine belt adjusted


You cant adjust the belt tensioner. You have to replace it if it wont provide the proper tension.

Apr 13, 2009 | 2002 Toyota Highlander

1 Answer

Cant figure out how to get the serpentine belt back on


If you purchase a goodyear replacement belt the diagram is on the back of the sleeve

Apr 11, 2009 | 2000 Volvo S80

1 Answer

Serpentine belt


The 3.0 engine is equipped with an auto tensioner (spring loaded).
If your experiencing a noise concern it could be the belt needs replacement or a pulley could be mis-aligned.

Mar 22, 2009 | 2002 Mercury Sable

1 Answer

I have a 91 pontiac 6000, I replaced the alternator and now I cant put the belt back on, I need a diagram of it


Hi,

you need a Belt Tensioner Serpentine Tool, to lift the Arm and replace the Belt,
disconnect negative Battery Cable, first!

connect Serpentine Belt, starting at bottom crankshaft, work belt, up the belt rotates toward, Radiator , so the Belt, goes under the Water Pump, and under the Belt Tensioner.



Dec 21, 2008 | 1991 Pontiac 6000

Not finding what you are looking for?
2000 Dodge Stratus Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...