Question about 2005 Honda Civic
When i stop mi car, take the keys,the brake lights continuing on, and no off. I remove rhe lights, but are too hot. I already remve the pedal switch, but no resolve the problem.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: P1457 - Honda Civic 2005 LX
this car come with tree diferent engines the answer i'm going to give you is for a 1.7 engine sohc that codes means you have a leak on the evaporative system this system monitor the vapors from fuel tank this code some time might appear for filling the fuel tank with car runing i recomend you to clear code and make sure the fuel cap is not loose because there is a fuel pressure sensor in the tank and if the sensor don't read the right pressure then it will set the code
Posted on Jun 01, 2008
Sounds like you might have a caliper that is stuck and is not fully disengaging. If it is in the rear then you may have a bad rear caliper. Twoo things you can try. One is to crawl under the ca and adjust the tension two nuts on the emergency brake line. If that does not resolve the problem then remove the back tire and try to spin the drum or rotor whichever you may have. If it does not spin then try adjusting the e brake cable more if it still does not respond then you need to do a brake rebuild. Also does it pull while it is dragging? If it is then you will need to rebuild the brakes no matter what.
Posted on Feb 06, 2009
Yes, there is a spear point style clip that is holding the assembly. Wrap a flat blade screwdriver with some masking tape (prevents paint scratches) and pry between the forward outboard corner of the brake light housing and the car body. You want to pry the assembly rearward.
Posted on May 31, 2009
It should be your brake light switch. There is a little plate welded to the arm of the pedal that has a hole with a rubber stopper. The rubber stopper is most likely missing, or damaged. You should be able to take a flashlight and see the plate and the switch. If the hole is plugged up, you will need the brake light switch, if not, replace the plug.
Posted on Jun 02, 2009
It sounds like your brake pedal switch is not working right. Are the lights on all the time, or just when you turn ignition off? If the former, it is bad brake switch. If the latter, you likely have a bad ground located somewhere in the wiring harness.
Most vehicles have the switch located on a small plate next to the brake pedal arm. Follow the pedal up the arm and to the firewall. Along the way you should see a plunger style switch that looks like the one that you bought. It might also be found inside or next to the brake booster under the hood.
Posted on Aug 25, 2009
Tips for a great answer:
Dec 29, 2013 | 1994 Honda Civic
Dec 21, 2013 | 2005 Honda Civic
Nov 17, 2011 | 1996 Honda Civic
Jun 25, 2011 | 2005 Honda Civic
Dec 14, 2010 | 2005 Honda Civic
Aug 25, 2010 | 1990 Honda Civic
Nov 28, 2009 | 1999 Honda Civic
Jun 02, 2009 | 2005 Honda Civic
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: