Question about 2009 Dodge Ram Pickup 1500

Open Question

Hello, I'm searching the EGR valve in a 2009 DODGE RAM 5.7 HEMI

A picture would be nice!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ewashmidas
  • 362 Answers

SOURCE: P0406 Code

It is for the Exhaust Gas Recirculation (EGR) valve.

Posted on Feb 02, 2009

ZJLimited
  • 17970 Answers

SOURCE: egr valve location on dodge ram 2005 4.7

The EGR, or exhaust gas recirculation valve, takes inert exhaust gasses drawn from the exhaust system and reintroduces them into the combustion chamber through the intake manifold. This process lowers the peak combustion temperature and helps combat the formation of Nitrous Oxide (NOx) in the exhaust.

f0255cf.jpg

  1. Separate the intake ducts from the air cleaner assembly by loosening the retaining clamps and pulling the ducts away from the housing.
  2. Disconnect the vacuum line from the air cleaner assembly.
  3. Remove the wing nut that secures the air cleaner housing lid to the base.
  4. Remove both the air cleaner hosing lid and base.
  5. Locate the EGR valve. Look at the front of intake manifold. The EGR valve will be bolted to the intake manifold just in front of the carburetor.
I hope help you with this. Good luck.

Posted on Sep 07, 2009

  • 83 Answers

SOURCE: 2005 Ram 1500 4wd HEMI PO406 - EGR

Hey greenlee99, your best bet would be to grab one these manuals so that you have pictures and diagrams along with step by step instructions. It will tell you what tools and parts you need. Can't go wrong with having it.

Posted on Feb 15, 2010

  • 170 Answers

SOURCE: Where is the EGR Valve on a 2004 Dodge Durango

Have not replaced the EGR on my 04 Durango as of yet, but if you look into the the passenger side front fenderwell you will see part of it. Usually 2-4 bolts and the harness connector are all that is required.

Chrysler EGR valves are not known for their reliability.

Don

Posted on Apr 17, 2010

  • 22 Answers

SOURCE: how do i change the spark plugs on my 2009 dodge

if problems with hard start check heating coil in the intake side left on engine no spark plugs please dont even go to autozone n ask u look like a fool

Posted on Apr 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the fix for (egr flow sensor a) on 2007 dodge hemi? This code came up when light came on.


It is probably the EGR valve itself. I would remove the valve and check the lines coming off of it to make sure it is not clogged. If that checks out ok then I would replace the EGR Valve and then clear the code with a scan tool.

Mar 25, 2011 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

I have a 2005 Dodge Ram 1500 5.7 hemi. I have to replace the EGR since erasing codes numerous times has not helped. Do I need the PCM flashed after replacement? Thanks


Hello! No, not at all...After you change the EGR, disconnect the + battery terminal for 3-5 minutes...Reconnect...And if the EGR was the cause of the fault the code will clear...Make sure you have the stereo code...If not, connect a regular 9 volt battery to a cigar lighter plug (pay attention to polarity)...Plug it into the cigar lighter socket before you disconnect the battery...It will maintain power to the stereo...Guru...Saailer

Dec 25, 2010 | 2005 Dodge Ram 1500

1 Answer

2005 ram hemi, code is P0406


Check the voltage at the EGR solenoid and ground. Remove the EGR valve and clean the carbon buildup out of it or replace it altogether. A new EGR valve will run you about $60 from the dealer.

Jun 28, 2010 | 2005 Dodge Ram

1 Answer

2006 dodge ram hemi 5.7 liter trouble codes 1404 and 405 and check engine light on


The check engine light is on to tell you that the ECU has detected a fault. The faults are stored as codes. The codes both have to do with a deficiency of exhaust gas going through the EGR valve. You will need to find out if the problem has to do with the valve, a leak, or the circuit.

May 20, 2010 | Cars & Trucks

1 Answer

Where is egr valve on 05 5.7l hemi 4wd


The EGR on my 05 Hemi Durango is located on the passenger side front of the engine near the head.

I would bet your Ram is the same or close to it.

Apr 24, 2010 | 2005 Dodge Ram 1500

1 Answer

Have a 2005 dodge ram with 5.7 hemi has an eng


Dodge/Chrysler EGR valves are known to be unreliable. The one on my wife's 05 Grand Caravan died in the 40k miles range.

They are not really serviceable. The usual fix is replacement. Part will be between $50 and $150 depending on where you get it. Installation most of the time is 2-4 bolts and the harness.

Don

Apr 15, 2010 | 2005 Dodge Ram 1500

1 Answer

2005 Ram 1500 4wd HEMI PO406 - EGR


Hey greenlee99, your best bet would be to grab one these manuals so that you have pictures and diagrams along with step by step instructions. It will tell you what tools and parts you need. Can't go wrong with having it.

Feb 15, 2010 | 2005 Dodge Ram 1500

1 Answer

Where is the egr valve on a 2005 godge ram trk, 1500 2wd with a 5.7lt hemi


A new EGR Valve that comes from Dodge them selfs will go for around 50$

- as for replacing, the EGR valve has 4 bolts, and on this year ram in right in front of the passenger side head. Be careful not to mix up the wiring.

--Should look something like this..
https://w05.dealerconnect.chrysler.com/service/mds2002/serviceInfo/en_US/9565.jpg

Dec 30, 2009 | 2005 Dodge Ram 1500

3 Answers

Where is the egr flow sensor on a 2005 dodge ram


I just took mine to the auto part store to find out. From what they told me its the little box on top of the Hemi Engine cover. They said I have to go to the dealer to get the part though.

Apr 10, 2009 | 2005 Dodge Ram 1500

1 Answer

P0406 Code


It is for the Exhaust Gas Recirculation (EGR) valve.

Feb 02, 2009 | 2005 Dodge Ram 1500

Not finding what you are looking for?
2009 Dodge Ram Pickup 1500 Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...