Question about 1989 Ford Ranger

Open Question

89 ford ranger auto trans removal - 1989 Ford Ranger

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dj_ricko_198
  • 128 Answers

SOURCE: won't shift into overdrive

these cars are a 4 speed auto
it you here the car change 4 times then it is going in to od
best way to try this is by following

  1. go to an open rood where you can do 100kph (60mhp)
  2. have your overdrive turned off (there should be a light on the dash board that comes on)
  3. then turn over drive on and see if the RPM drops
if it dose not work let me know and i will try my best to help you
ricko

Posted on Dec 27, 2008

motor1258
  • 6674 Answers

SOURCE: 89 ranger manual trans slipping

Clutch & pressure plate assy complete replaced ? Same size? Was flywheel turned, or at least roughed up? Slave cylinder have any adjustment on it, maybe too tight. Is there any play between slave & clutch fork assy?

Posted on Jan 05, 2009

emissionwiz
  • 75822 Answers

SOURCE: 89 Ford Ranger Carrier bearing

All the bearings for the rear diff are pressed off and on, they can be done at home if u have a high quality bearing puller, but to press them on should be done at the machine shop.

Posted on Feb 09, 2009

  • 18 Answers

SOURCE: when do you change timing belt on 2002 Ford Ranger

It is recommended that you change the timing belt at 80000 miles, but I had one with over 200,000 miles that never had a problem.

Posted on Sep 24, 2009

roniecon
  • 6826 Answers

SOURCE: I have an 89 ford ranger 2.9 engine. The engine

Have the fuel pressure checked,and replace the fuel filter first,it is most likely one of the two causing the problem,if this was helpful,please rate,thank you.

Posted on Jun 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission install 89 ford ranger


You should be able to rent a spline alignment tool from the parts house where you got transmission. I'm assuming you have a manual transmission so the clutch pad doesn't want to cooperate? I think even with an automatic it's much the same.

Jun 15, 2012 | 1989 Ford Ranger

1 Answer

I need to buy a new carburetor but i dont know what carb to order its for a 1984 ford ranger its a single cab with automatic trans and v-6 engine dose anyone know what carb i need to order ? thanks for...


The 1986 Ranger V-6 was a 2.8L 170.4 cu or 2792 cc.
The carb for this engine was a 2 BBL Model 2150, E37E-AEA (Will not cross except for re-build kits!)
The Holley remanufactured PN is 645544

Autozone lists 3 carbs... one for manual trans one for auto trans and one other:
http://www.autozone.com/autozone/parts/1984-Ford-Ranger-2WD/Carburetor/_/N-ik8k8Z8vd1l?filterByKeyWord=Carburetor&fromString=search
Auto trans below....
http://www.autozone.com/autozone/parts/National-Carburetors-Carburetor/1984-Ford-Ranger-2WD/_/N-ik8k8Z8vd1l?counter=1&filterByKeyWord=Carburetor&fromString=search&itemIdentifier=50856_108282_3651_1248

NAPA lists the Holley reman... 645544

Thanks for choosing FixYa,
Kelly

Apr 27, 2011 | Ford Ranger Cars & Trucks

1 Answer

How many gallons whould it take to fill up a 4x4 ford ranger 1996 auto trans 4.0


Assuming you are talking about a 4r55e tran
with the 4x4 deep tran pan.
and the tran was rebuild with new torque converter
about 2 gal 8qt

Jan 21, 2011 | 1992 Ford Ranger

1 Answer

I have a 89 ford ranger automatic 4x4 and I was driving it and all at once the reverse went out on it and all the other gears work fine. What could be wrong with it?


itcould bea stuck valve in trans. you can try changing the fluid @ filter go back with new fluid and add lucas trans trtmnt it works great for trans w/stuck valves

Aug 13, 2010 | 1999 Ford Ranger SuperCab

1 Answer

2005 ford ranger 6 cyl auto trans - how to drain


I would pickup a plastic manual pump syphon hose, insert it in the transmission fill tube and pump out the appropriate amount. You should be able to buy on cheaply at most auto parts or home improvement stores.




528572e.jpg

Sep 19, 2009 | 2005 Ford Ranger

1 Answer

2003 ford ranger auto trans removal


you have to use a strong screwdriver . place it between two bolts on the converter to hold it while you use your rachet wrench to loosen the bolts

Jan 03, 2009 | 2003 Ford Explorer Sport

2 Answers

89 ranger transmission


The trans gearing is all the same, the rear end gear set is where final drive ratio is determined

Sep 18, 2008 | 1989 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...