Question about 2002 Chevrolet Avalanche

Open Question

Buzzing sound when working door locks

When I am locking or unlocking the door using the electric door locks there is a loud buzzing sound from the left door

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: remote lock for back doors and rear tail gate door

Actually I found a solution. I remove the lock relay form the fuse panel and placed it back in place. I did not replace it. After doing this they worked. I probably need to replace the relay at some point, but for now that solved the problem. It was hard for me to believe that there is a separate relay for the lock and unlock circuit.

Posted on Sep 29, 2008

  • 2 Answers

SOURCE: sliding doors won't lock or unlock using keyless.

there are 3 possibilities that I would check first. 1: make sure the contacts on the door, and body where the touch are clean. the lock and unlock signal are sent through these. 2: You may try replacing the battery in your key fob. 3: the power lock motors may have gone bad. To check, lock the doors with the drivers door panel, if they lock, they are fine. Another solution may be to recode your key fob. procedure for coding the fob to your vehicle can be found online.

Posted on Dec 18, 2008

  • 62 Answers

SOURCE: 2005 silverado door locks

i work at a chevy dealership,just had the same problem my fix was to replace the power door lock relay located on drivers side interior fuse block

Posted on Jan 21, 2009

autotherapis
  • 501 Answers

SOURCE: 2000 Astro van - drivers window only goes up a in increments

The motor is shot. It works a little and overheats, replace the motor . Same thing the the lock acuators. The are trying but have lost the power to move the locks. May as well replace them while the door is apart.

Posted on Aug 16, 2009

  • 1 Answer

SOURCE: 2005 chevy colorado door locks

i disconecter the battery on my 05 colorado and now my electronic switch to lock/unlock does not work and my driverside window doesnt either.... all fuses are good as well ???

Posted on Jun 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When using keyless entry, the locking mechanism makes loud buzzing sound while unlocking the door.


replace the actuator assembly in the door that buzzes. its a common issue.

Feb 28, 2011 | 2005 Kia Sorento

1 Answer

Hello I have a 2000 neon and when I use the electronic lock the doors make a loud buzzing noise.


The loud buzzing noise means the electric motor that actual unlocks the door has failed or is failing. In order to repair this you need to replace them.

Oct 12, 2010 | 2000 Dodge Neon

1 Answer

I have 97 honda accord 4 door. electric locks


Sounds like a sticking switch ( actuator ) in the door.
Pull off the door panel and , looking inside the door, follow the rod from the key to the actuator .
Clean the actuator and make sure it works freely before re assembly.

Mar 30, 2010 | 1997 Honda Accord

1 Answer

Driver side doors will not lock. Loud,sick noise when button is pushed to lock or unlock.


loud buzzing noise but locks not working equals bad door lock actuator. remove door panel, locate and replace actuator.

Mar 23, 2010 | 2000 Jeep Grand Cherokee

2 Answers

Back door wont unlock


I have a 1999 Chrysler T&C 3.8 liter like yours and it sounds
like you are having the same the same problem I had.
Every time you hit the door unlock or lock button, it made a loud
buzz like you just missed a question on a game show. ;-)

It turned out the problem was the rear lift gate lock actuator. The part costs
about $40 from the dealer if I can recall correctly.

The repair involves: 1st removing the middle and rear seats to get
access from the inside to the rear gate
(obviously you will have to remove the seats from the side doors
since the rear gate won't open yet)

Remove the plastic inside rear gate panel and molding (phillips screws)
Once you remove the panel, you may see a way to manually
open the rear gate. As I recall, I think there was a access opening
covered from the inside with a black weather/insulation tape.
Carefully removing this out of the way gave access to a way to
manually open the gate, making the rest of the work easy.

Remove the electrical connector and the mounting bolts
to remove from the actuator. It is attached to the inside
rear gate with 2 or 3 bolts (10 mm?)

Remove the old one and replace the part, then put it all back
together, make sure you reconnect the electrical connector

Takes about an hour for the whole job (max)

Hope this helps,

Wes

May 03, 2009 | 1999 Chrysler Town & Country

1 Answer

Power door lock problem


The problem is caused by the electric motor that operates the power lock in that door, this motor is inside the door and will need to be replaced to correct the noise issue..

Apr 10, 2009 | 2002 Mitsubishi Eclipse

1 Answer

Master door switch? or something else? buzzes when i press lock


ok ur door lock switch isnt going out,,however ur drivers front door lock actuator is going or is already bad...have that replaced..also as far as the end noise buzz u hear , that may be ur a.b.s modulator and accumulator cycleing on and off..it may be empty and or leaking..have the a.b.s modulator and accumulator checked at the dealer..its an expensive fix... ur modulator unit in in the front left or right of the vehicle depending if u have a v6 or 4 cyl. its a square unit with a rectangular brake fluid resevroir and a long tubular cylinder (acummulator)... also identify it by the orange connectors...and the brakelines going to it...common symptom with those accords....they leak alot especially if with high mileage..

Apr 09, 2009 | 1996 Honda Accord

2 Answers

2000 dodge durango locks


the electric door lock actuators are failing replace the ones that are making the noise.

Mar 08, 2009 | 2000 Dodge Durango

1 Answer

My door locks are making a buzzing sound


Spray as you can , (inside, upside down, downward) the latches, & Locks, down in the handles etc , with penetrant and keep working them. After loosened up , try getting a spray grease in there too, like white lithium grease in aerosol. Sounds like latches are getting partially seized/sticky, and causing electric motor on locks to spin a bit. I've had to remove door panels to really get them loosened up & greased, but you may get lucky

Nov 20, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
2002 Chevrolet Avalanche Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...