Question about 1990 Toyota Corolla

1 Answer

I need the torque setting for head cylinder on 1994 toyota camry 220se

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 954 Answers

Torque the cylinder head bolts in three stages as described below:
1st stage = 25 NM.
2nd stage = 49 NM.
3rd stage = Rotate each bolt further 90 degrees.

Posted on Feb 15, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1779 Answers

SOURCE: need torque settings for 1985 4A corolla cylinder head

hey, torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:

9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Posted on Jan 14, 2009

  • 496 Answers

SOURCE: I need the torque settings

cylinder head bolts:

step one: 22 Ft-lbs.
step two: tighten additional 90 degrees
step three: tighten additional 90 degrees

Posted on Feb 22, 2011

johnjnail
  • 1702 Answers

SOURCE: cylinder head 2.4 torque

step 1 58 ft lbs.

step 2 additional 90 degrees

1_10_2012_5_41_54_pm.jpg

Posted on Jan 10, 2012

Testimonial: "THANKS JHON NAIL THIS SOLUTION WAS HELPFUL "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Hi, what is the cylinder head, conrod and main bearing torque settings for a toyota camry 2L,1996 model.


-Always follow its repair manual. Never trash any body.
-Good mechanic always did. doesn't matter how many car he or she repair or same model.

Good Luck

Mai

Jun 03, 2015 | 1996 Toyota Camry

1 Answer

1994 toyota Camry 2.2L. Having problems with Engine after head gasket installation.


Did you use new stretch bolts and the correct torque settings?

Mar 04, 2014 | 1994 Toyota Camry

1 Answer

I need too know the torque specs on head bolts and crankcam 2.4 engine


on a 2002 2.4 engine head bolts are 'torqued to distance'.

First, install all the bolts, and, in a sequential fashion, starting at the innermost, working outward, torque all bolts to 70 N-m/806 kgf-cm/58 foot lbs.

Next, mark the front side of each head bolt with a dot of paint. Retighten the cylinder head bolts 90 degrees, starting at the inner 2, and working outward.I dont thin anything has changed on this engine since then.

Mar 19, 2013 | 2005 Toyota Camry XLE

1 Answer

I need how much torque the head bolts for toyota camry 1996


It is 36 ft-lb, but done in two stages to a prescribed sequence.The bolts should be oiled. See here p67

http://www.turboninjas.com/camry/eg1.pdf


This is for the 4-cyl. The V6 is 40 ft-lb, and the link is .....eg2.pdf.

Aug 13, 2012 | 1996 Toyota Camry

1 Answer

Cylinder head 2.4 torque


step 1 58 ft lbs.

step 2 additional 90 degrees

1_10_2012_5_41_54_pm.jpg

Jan 10, 2012 | 2003 Toyota Camry

1 Answer

What is the torque specs for 94 toyota camry axle nut with four cylinder


It is are german tightening torque, "good and tight"

Nov 04, 2010 | 1994 Toyota Camry

1 Answer

Toyota windom v6 head bolts torque settings


INSTALL CYLINDER HEAD if any bolts broken or deformed , replace it.

7------2-----4--------6
5------3-----1--------8
FRONT sequence head bolts
8-------1-----3-------5
6-------4-----2-------7

CYLINDER HEAD bolts are tightened in three progressive steps
1. 34 Nm ( 25 ft.lb)
2. 90 degree
3. another 90 degree.

double check everythings before install the head,
be sure to install the GASKET correctly.

Hope this can help.

Apr 19, 2010 | 1993 Toyota Camry V6

1 Answer

Need torque specs for a 2002 toyota camry 2.4 for the head bolts


The 2002 2.4 engine head bolts are 'torqued to distance'.

First, install all the bolts, and, in a sequential fashion, starting at the innermost, working outward, torque all bolts to 70 N-m/806 kgf-cm/58 foot lbs.

Next, mark the front side of each head bolt with a dot of paint. Retighten te cylinder head bolts 90 degrees, starting at the inner 2, and working outward.

We hope that this helps you out.

Dec 29, 2009 | 2002 Toyota Camry

1 Answer

A 1994 toyota camry needs timing set how much will it cost


The question is a bit vague as the timing is controlled by a computer. If you have a 4 cylinder engine and have over 60,000 miles what you need to do is have the timing belt replaced. This casts between $300 and $400 in my area but I use independent shops, not the dealer.

If this timing belt is worn or breaks it will, not might, cause severe damage to the valves. The fix then is a new cylinder head and costs much more than a timing belt.

Jun 19, 2009 | 1994 Toyota Camry

Not finding what you are looking for?
1990 Toyota Corolla Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...