Question about Kia Sorento

Open Question

Rear seat belt twisted and fully out - Sorento Kia Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22156 Answers

SOURCE: 02 mustang gt seat belt won't come out

never seen one here in spain,but most cars you have to remove the door rubber surround first then the kicker plate to remove the pillar trim to get to the seat belt mechanism .best of british

Posted on Feb 14, 2009

Ad
  • 1 Answer

SOURCE: turn airbag off for 5 series bmw

The airbags do not need to be and should not be turned off if the *child* is sitting front-facing. The danger to kids in the front seat is that a rear facing baby would be hammered into the back of the seat. A front facing child would be protected as an adult. So, before you hunt down further info ... is your kid still sitting rear facing? And is your forward facing child boosted up with an appropriately fitted lap/shoulder belt?

Airbags in and of themselves are dangerous to kids.

Posted on Apr 15, 2009

  • 186 Answers

SOURCE: the backseat won't go back up

You will have to cut the belt to fold the seat up.Then you will have to remove the seat caover & replace the seat belt retractor which comes with new belt!! Common prob

Posted on May 09, 2009

  • 6 Answers

SOURCE: driver side seat belt is fully retracted and will not release.

Try giving it a solid tap with something hard (screw driver handle) while jiggling the seatbelt.

Posted on Jun 01, 2009

heavymetal77
  • 721 Answers

SOURCE: seat belt will not retract. how do i fix it?

The mechanism that allows it to retract is broken. Replace the seat belt.

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the fuses located for the air conditioner in a 2001 pontiac bonneville


The interior fuse box in a Pontiac Bonneville is underneath the backseat on the driver's side.

To remove the rear seat cushion:
1. Pull up on the front of the cushion to release the
front hooks.
2. Pull the cushion up and out toward the front of
the vehicle.

To reinstall the rear seat cushion:

1. Buckle the center passenger position safety belt, then
route the safety belts through the proper slots in the
seat cushion. Don't let the safety belts get twisted.
2. Slide the rear of the cushion up and under the
seatback so the rear - locating guides hook into the
wire loops on the back frame.
3. With the seat cushion lowered, push rearward and
then press down on the seat cushion until the spring
locks on both ends engage.
4. Check to make sure the safety belts are properly
routed and that no portion of any safety belt is
trapped under the seat. Also make sure the seat
cushion is secured.

Notice:
The battery and main fuse blocks are located
under the rear seat cushion. The battery's ground
terminal and some relay wires are exposed.
To help avoid damage to the battery and wires,
be careful when removing or reinstalling the seat
cushion. Do not remove covers from covered
parts. Do not store anything under the seat, as
objects could touch exposed wires and cause
a short.

Jul 22, 2014 | 2001 Pontiac Bonneville

1 Answer

2000 Focus Seat Belt Retractor - Pleaes Help


I had the same issue with the rear seat belt. what my solution was taking the plastic cover off the top side that pulls the seat belt back in and notice that on these cars, they actually fold the seat belt at the very end to prevent tearing. therefore the seat belt was folded inside the re-tractor and got stuck. what i did for a solution was twisted the seat belt unfolding it by grabbing the other end behind the re-tractor and now it works. Try not to fully extend it next time...... if that doesn't work go to a junk yard 12 bucks replace the whole seat belt.

Apr 29, 2012 | 2000 Ford Focus

1 Answer

C320 rear seat belt stuck


Unfortunetly the only repair for that issue is to replace the complete seat belt mechanism. Basically the internal winding mechanism has gone out and will not retract the seat belt.

Feb 16, 2012 | 2005 Mercedes-Benz Cl-Class

1 Answer

Haw to gat out seat back


Rear Seat Backrest-SuperCab Removal
  1. Fold down both rear seat cushions.
  1. Remove the rear seat back.
    1. Push the wire hooks rearward to disengage the seat backrest from the back panel of the cab.
    1. Lift the rear seat back upward and remove.
    a0015238.gif
Installation
  1. Align the upper hooks with the upper brackets on the back panel of the cab.
  1. NOTE: Make sure the safety belt webbing is not twisted.
    Route the rear center safety belt through the retainer ******** the rear seat back.
  1. Place the lower hooks behind the lower brackets on the back panel of the cab.
  1. Lower the seat back until the lower hooks engage the lower brackets.
  1. Verify all three upper hooks have engaged the upper brackets

Feb 12, 2011 | 2005 Ford F-150

2 Answers

87 Grand Am Seat Belt Locked


If your seat belt is in the door, start slamming your door after you are inside the car and this will activate the tensioner that holds the seat belt in place. This will not always work ,just cross your fingers.

Jul 14, 2010 | 1987 Pontiac Grand Am

1 Answer

1996 Chrysler cirrus has rear seat belt that won't unlock


You may have something in the retracter for the seat belt so you will have to acces it and take a look to see what is in there.

Feb 07, 2010 | 1996 Chrysler Cirrus

1 Answer

I need to replace a rear seat belt in a 1997 Ford Tarsus. Does any know the best way to access the assembly? In addition, are there any diagrams available that show the connection points?


please don't forget to rate, thx.

Retractor and Tongue—Sedan
SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Safety Belt Bolt Bit T77L-2100A
NOTE: Safety Belt Bolt Bit T77L-2100-A should be used for safety belt removal and installation.

Removal
  1. Remove rear seat cushion. Refer to Section 01-10 .
Seat Cushion, Rear Sedan
Removal
  1. Apply knee pressure to lower front portion of the rear seat cushion. Push rearward to disengage rear seat cushion pad and frame (600A88) from rear seat cushion front retainers (63370).
  1. Remove rear seat cushion from vehicle.
  1. Remove rear seat back. Refer to Section 01-10 .
Seat Back, Rear 60/40 Split Bench—Sedan
Removal
  1. NOTE: Safety belt bolts do not secure seat back to vehicle.

    Remove rear seat cushion as described.
  1. Fold down back seat and remove two bolts in the center of each seat back striker plates.
  1. Remove two bolts from outboard rear seat back frame retaining brackets.
  1. Lift seat back up and pull forward to remove from vehicle.
  1. Remove panel (52018) and quarter trim panel (31012). Refer to Section 01-05 .
Trim Panel, Quarter—Sedan Removal
  1. Remove rear seat. Refer to Section 01-10 .
  1. Pull up on rear section of rear door scuff plate that overlaps lower quarter trim panel.
  1. Pull lower quarter trim panel away from body.
  1. Remove safety belt retaining bolt.
  1. Feed safety belt through lower quarter trim panel.
  1. Remove safety belt anchor plate-to-sill bolt from quarter panel.
  1. Remove retractor anchor nut and retractor from rear quarter panel.
  1. Remove upper seat belt anchor bolt and anchor from upper rear quarter panel.
  1. Slide anchor plate end of safety belt through the openings in the quarter trim panel.
  1. Remove outboard front safety belt retractor and tongue (611B08) from the vehicle.


    2a6fac0.gif


    Item Part Number Description 1 386277-S190 Bolt (Part of 611B68) 2 31012 Upper Rear Quarter Trim Panel 3 611B60 Retractor and Tongue 4 N800937-S190 Nut 5 389370-S190 Bolt 6 — Rear Quarter Panel (Part of Body) 7 52018 Lower Rear Quarter Trim Panel 8 — Mounting Stud (Part of Body)
  1. Remove seat belt anchor bolt and retractor and tongue from rear deck panel.


    fff90b0.gif

Installation
  1. To install, reverse Removal procedure.
  1. Make sure the safety belt webbing is not twisted. If it is, remove the twist.
  1. Tighten retractor anchor bolt and safety belt anchor plate-to-sill bolt to 34-46 Nm (25-33 lb-ft).
  1. Check the restraint system for proper operation.

Jun 30, 2009 | 1997 Ford Taurus

1 Answer

My rear seatbelt in my subaru outback is locked and wont pull out to buckle up. Can it be fixed


I assume you've already worked the seat belt end back and forth with force. Did the belt move at all? Did you remove the rear seat bottom cusion from the car? That will give you additional leverage on the belt.
If the belt twisted the last time it was used and then rolled up, you need to go to the dealer or an upholstery shop for help.

Apr 30, 2009 | 2005 Subaru Outback

2 Answers

Turn airbag off for 5 series bmw


Hi , if you visit a dealer they will be able to let you know how much it will cost to deactivate the passenger air bag.

Mar 14, 2009 | BMW 5 Series Cars & Trucks

1 Answer

'04 LR Freelander - rear seat belt tensioned/stuck


un bolt to remove tension, pull some of the belt out and rebolt.

Mar 03, 2009 | 2004 Land Rover FreeLander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...