Question about 1986 Nissan Pickup 4WD 1986

Open Question

1986 Nissan 4X4 Truck stuck in gear - 1986 Nissan Pickup 4WD 1986

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 201 Answers

SOURCE: vaccum hoses are missing. 1986 Nissan 720 4X4

truck normally has a vacuum hose routing diagram on under side of hood on drivers side.also look for metal tag on center of engine compartment fire wall which gives you a motor id @ and trk model # you can then know what engine vacuum diagram you need.i have a diagram for an 86 720 series Z24 carb engine that can be copied off of truck..chris

Posted on May 07, 2009

Ad
  • 55 Answers

SOURCE: frame rusted thru on 1996 se v6 king cab 4x4

cutting a section off of another old frame to fix yours isn't worth it. it would be easyer to take it to a metal shop and have them fix it. at least you know that the repair will last.

Posted on May 26, 2009

c17hydro
  • 2984 Answers

SOURCE: 1986 Nissan 720 4x4 pickup truck. Speedometer

Either the gauge is bad, the cable is kinked or the speedometer connector is bad...at the tranny.

Posted on Sep 25, 2009

  • 438 Answers

SOURCE: 1986 Nissan Pickup

Shift fork may also be one of the reason! watch the shift fork while moving the clutch in and out.
1)The shift fork is near the clutch master cylinder on the tranmission housing. you should now move the fork left and right while the clutch is moved in and out. 2)From your query, it sounds to me that your clutch is not engaging and disengaging completely. 3) This is due to the air block. Make a bleeding process to blow the air out! 4)A broken shift fork will also prohibit the clutch from engaging/disengaging.

Posted on May 10, 2010

rabbit7954
  • 417 Answers

SOURCE: I was wondering if you

It sounds like your clutch went out.

Posted on Jan 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1986 Nissan 4x4 hard body pickup truck with 2.4 liter v-6 with throttle body


need to check throttle body and throttle body valve and fuel pressure regulator for damage dirt or stuck open ---fuel pumps at around 50 + psi so if regulator or throttle body is not closing off residual pressure will push fuel throug

Sep 24, 2016 | Nissan Hardbody Cars & Trucks

2 Answers

How many miles does a 1986 Nissan pickup truck have on a full tank


Depends on tank capacity, average gas consumptions, driving habits and road conditions

Apr 24, 2015 | Nissan Pickup Cars & Trucks

1 Answer

How do I remove the engine from my 86 Nissan 4x4 truck?


hi,I have a 85 nissan 720 4x4,had it for over 20 years,here's a link to the engine removal guide,here's my truck. Repair Guides Engine Mechanical Engine AutoZone com Here's a video,i did,have more. 85 nissan 720 4x4 silverbullet

Oct 04, 2014 | 1986 Nissan Pickup 4WD 1986

1 Answer

I was wondering if you can help me out, I have a 1992 Nissan Terrano 3Lt V6 4x4, its just an old farm truck, Well today I was driving it down the paddock and all of a sudden it wont move in any gear,...


If it is an automatic, and absoloutely no movement it sounds like the torque convertor has failed. Either impellor or turbine. If it is a manual the clutch may have gone. If it is a manual, place it in gear and get a friend to rock the car back and forward. See if you notice any movement of the harmonic balancer/belts in the engine bay?

Jan 24, 2011 | 1994 Nissan Pathfinder

1 Answer

1986.5 NISSAN 4X4 TRANNY HUNG IN REVERSE


Most likely an internal gearbox problem, but I would first check the shift linkage at the gearbox end, see if you can disconnect it and change out of reverse from there.

Jun 17, 2009 | 1986 Nissan Pickup 4WD 1986

1 Answer

CHANGING THE FUEL PUMP ON A 1986.5 NISSAN HARDBODY EXT CAB 4X4


lol good ? look at your tank staps compared too the bed bolts might be cheaper getting new bolts rather then fuel straps, the pumps from a 2 or 4 wheel might not make a difference *** lond as same engine.

May 10, 2009 | 1986 Nissan Pickup 4WD 1986

2 Answers

Vaccum hoses are missing. 1986 Nissan 720 4X4


truck normally has a vacuum hose routing diagram on under side of hood on drivers side.also look for metal tag on center of engine compartment fire wall which gives you a motor id @ and trk model # you can then know what engine vacuum diagram you need.i have a diagram for an 86 720 series Z24 carb engine that can be copied off of truck..chris

Apr 02, 2009 | 1986 Nissan Pickup 4WD 1986

1 Answer

Truck only drives in 4x4


i think there is something in the transfer case causing it probably an acutator

Nov 17, 2008 | 1986 Chevrolet K2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...