Question about 1995 Land Rover Discovery

Open Question

Mercedes 313 2.2 sprinter head bolt torques - 1995 Land Rover Discovery

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: head bolts torque settings

According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Posted on Feb 07, 2009

Ad
martin538
  • 117 Answers

SOURCE: need head bolt torque settings for 200 landrover discovery 4.0 liter 241 cu.in.

Stage 1 20nm
Stage 2 +90 degrees
Stage 3 +90 degrees

Posted on Apr 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the wheel nut torque on a duel wheel sprinter rear nuts


As you can see from this Mercedes manual page, the specified torque for "wheel nuts" (not bolts, which you probably do NOT have) is 133 ft/lbs. Many reference sources quote a range of "126-140" foot-pounds for the dually-wheel Sprinter 3500.

https://www.manualslib.com/manual/805065/Mercedes-Benz-Sprinter.html?page=234

Regards,

Ellsworth

Jan 24, 2017 | Dodge Sprinter Cars & Trucks

1 Answer

Checking automatic transmission fluid level in mercedes benz sprinter 313 cdi no dipstick supplied.


I don't know why they did this, But other manufacturers are going this way. The consumer can't check the transmission fluid. They have to go to a shop. You can get the stick online. Yours at operating temps are 16 to 17, or 160 to 170, depending on the stack you get. The stick is cable with a metal piece on the end. Push it down until it bottoms out. If you shove it to far/ force it. You have to remove the oil pan to get it out.

May 21, 2015 | Cars & Trucks

1 Answer

Head and can shaft bolt torque specifications and sequence for 2004 sprinter 2.7L 5 cylinder turbo diesel


A haynes manual for your make and model of your vehicle at your local auto parts store should tell you.

Jan 28, 2015 | Cars & Trucks

1 Answer

Where is th feul cap on the sprinter 313 cdi


Do you have the owners manual? Check in it, if not head to your local mercedes dealership

Jun 24, 2011 | Mercedes-Benz Sprinter Cars & Trucks

1 Answer

How to change a fuel filter in a sprinter 313 cdi 2005


I have trouble starting my 313 cdi van. Its a 2003 model. When I spray ether into the air filter, it starts. I know the glow plugs need replacing, but even on warm days it wont start. Any ideas?

Nov 25, 2010 | Mercedes-Benz Sprinter Cars & Trucks

1 Answer

Blowers not working on my sprinter 313 52 plate they work with a direct 12v so motor fine and brushes are new


Does the blower work on full speed only? if so then it is the resistor, which is located in the heater box.

Nov 14, 2010 | 2010 Mercedes-Benz Sprinter

1 Answer

Torque setting for sprinter cdi 413 cilinder head


turbo diesel ?? sprinter van aluminium head 85/90 lbs ,cast iron head 120lbs

May 28, 2010 | 2007 Mercedes-Benz C230 Sedan

2 Answers

(Steering Rack ,ball joint ,tie rod end and suspension) compatibility of Sprinter 312D and Sprinter 311 Cdi Sprinter 313/ CDi or any new model sprinter


fastest most reliable way to find out what parts are interchangable is to call your local wrecking/recycling/junk yard.... they have books that deal with that issue.

Dec 03, 2009 | 1994 Mercedes-Benz C-Class

Not finding what you are looking for?
1995 Land Rover Discovery Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...