Question about 2006 Chevrolet Equinox
My ABS light comes on and the code that comes up is U0100
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The abs is a add on for the brakes that when the tires come into a skid or slid they wont lock up..Your brakes will still work great with the abs disabled but your brakes will lock up if you push on the brakes hard enough to stop.Mainly abs works in slippery conditions not letting the tires lock up and keep the car rolling instead of making it slide..But no effect of the brakes will happen..Just make sure your fluid is full and there are no leaks and if you want to get them check you can stop by your local Auto Zone and they will scan your car for free and tell you what sensor is bad..I hope this was helpful to you...Have a great night
Posted on Apr 03, 2009
Take + terminal off the battery and leave it sit for 2-3 mins. This act's like a reset-to default factory settings...I had same problem on my 97 Z28, endeded up being the negative terminal to the battery was just slighly loose. I noticed it while disconnecting the the battery to reset my ob-cpu...Try this and let me know if it worked... i should!
Posted on May 23, 2009
SOURCE: abs codes co281 & co265
the first of the two codes is for the brake light switch, the one that is under the dash attached to the brake rod and brake peddle. Not much to diag on that one, if its bad it's bad, and when it sets the code that means it's bad.
The second one is for the abs modual, it's under the truck on the drivers side. It is bolted to the top of the thing that has all of the brake lines going to it. MOST all of the time that code is set the modual is bad. It can be a little hard to get the bolts out they are torqs 20 or 25(i'm getting old). There are four of them holding down the modual. There are also a couple of connectors going to it. And some of the time it will blow the fuse for the abs under the hood(its in the underhood fues block). Make sure to clean off the modual before you pull it out. You don't want dirt getting in the solinoids for the BPMV(that's the thing it's bolted to).
Posted on Oct 20, 2009
Tips for a great answer:
Dec 30, 2016 | 2007 Chevrolet Trailblazer
Nov 07, 2013 | 2005 Chevrolet Equinox
Apr 10, 2013 | 2006 Chevrolet Equinox
Nov 16, 2012 | Chevrolet Cars & Trucks
Jun 14, 2011 | 2005 Chevrolet Equinox
May 13, 2010 | 2006 Chevrolet Equinox
Nov 24, 2009 | 2005 Chevrolet Equinox
Sep 29, 2009 | 2005 Chevrolet Equinox
Mar 09, 2009 | 2005 Chevrolet Equinox
Feb 24, 2017 | 2006 Chevrolet Equinox
171 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: