Question about Cars & Trucks

1 Answer

Have 2000 s10 rebuilt engine 4cy 5sp but will not start with key but will with push button. put a new nutural saftey switch and still nothing, so put a new colom with a good switch in it still nothing. you still have to start with push button

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 104 Answers

It sounds like the wiring to the key was rerouted to the button. Does it come with the push button as standard, or was it installed @ a later date?

Thank you for contacting Fixya. Does this help? Let us know.

Ponder/Meditate/Pray for Peace.

Mary Oliveau { hugs }

Posted on Feb 15, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75197 Answers

SOURCE: 2000 Windstar rebuilt engine won't crank theft light comes on

Refer to the owners manual for dis-arming procedure for the anti-theft, if you do not have the owners manual here is a link to Ford for a free PDF file of the owners manual.

http://www.motorcraftservice.com/pubs/content/~WOYWIN/~MUS~LEN/41/00winog1e.pdf

Posted on Oct 13, 2008

  • 1 Answer

SOURCE: F150 ford truck 1990 key wont turn over engine new ign. switch

we have 1998 ford f15 we replaced the ignition and it still wont start the truck,, the key turns over now and the radio and everything comes on but it wont start, what is wrong???

Posted on May 09, 2010

sscullys
  • 984 Answers

SOURCE: my ford f150 wont start, battery is good, have a

On the firewall is the starter motor relay. There are 2 large battery sized cables to it, and 1 smaller ( 16 AWG ) wire that is orange or orange with a stripe ( forget the color, want to say white or tan ).

When you turn the key to the start position, check the smaller gauge wire for +12 V. The case should be ground. If you do not get +12 on the orange wire, try starting the truck in neutral ( apply the parking brake, chock the wheel, etc normal safety precautions ). Test for +12 V at the small wire. This is the output of the DTR ( Digital Transmission Range ) sensor or in common terms the Neutral switch. The start position on the ign switch runs through the DTR to the starter motor relay coil.
If you have a stick, the DTR is replaced by the Clutch Pedal Position Switch ( clutch must be pushed in to start ).
If you have power to this ( at the times the truck won't start ) next is to check the both battery cable ends to see if they are corroded and making intermittent contact ( not probable but possible ).

Posted on May 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New netral saftey switch, new collum with key switch, truck still will not start with key but will with push button direct to starter


Have you checked for power at the neutral safety switch ?
And I am assuming you mean it will not crank, right ?

Feb 15, 2014 | Chevrolet S 10 Cars & Trucks

1 Answer

What other motor will work in a 2000 chevy s10 2.2 4cy i like to stay 4cy


The days of switching engines without major modifications to the powertrain computer and engine harness are long over.
I don't think there is even an alternative from GM for the 2.2L. The only other engine choice for the s10 was a v6 engine, and that would require major modification for your truck, the computer and harness for one.
Best to replace an engine today with the exact same engine, and from the same year to ensure that all electrical connectors are the same and don't need changing, and that parts will match and bolt up the same. An engine swap is pretty easy, but a different engine may require hours of modifying wiring, connectors, parts, etc. Only a fanatic or die-hard modder would attempt it.

Sep 04, 2013 | Cars & Trucks

1 Answer

Tranny wont go in any gear. Tranny mod,saftey switch ?


No if no gear will engage then the transmission has failed and will need to be rebuilt, there is nothing else that causes this, there is no such thing as a "Safety Switch" for the transmission

Sep 26, 2010 | 2000 Chevrolet Venture

1 Answer

Will not start in park


Sounds like the linkage is off slightly or nutural saftey switch going bad

Sep 07, 2010 | 2000 Jeep Grand Cherokee

1 Answer

No crank


IF YOU HAVE TRIED IN PARK AND NO LUCK TRY IN NUTURAL IF NO LUCK YOUR SHIFT SENSOR ON THE SIDE OF YOUR TRANSMISSION COULD BE OUT OF ADJUSTMENT

Sep 05, 2009 | 2001 Dodge Grand Caravan

1 Answer

2000 diesel ram 3500 starter will not turn engine 20% of starts. After clicking key a few times, starter will turn. Starter was replaced and same thing happens. Is there something else in the start circuit...


relays are common on dodges, go in fuse box, pick another one such as horn,a/c one that you dont need to run but know is good and swap it out. try that, it could be the ign. switch too, neutral saftey switch on a auto, and clutch safety switch on a manual. make sure nothings jammed underneith clutch pedal also and your pushing it all the way down. check for dirty battery connections to. good luck!

Sep 03, 2009 | Dodge Ram Pickup 3500 Cars & Trucks

1 Answer

I have a 2004 jeep liberty and i put the key in and it will not turn. the dome lights work and everything else but i cant turn the key at all!! the steering wheel is not even locked nor pushing the brakes...


try turning the steering wheel to the left a little then to the right keeping steady pressure on the key . it also might be the saftey nutural switch sticking mounted on the steering colume under the dash.

Sep 01, 2009 | Jeep Liberty Cars & Trucks

2 Answers

My 1998 s10 2.2 truck will not start


-If the starter is only clicking or it is acting as if the clutch pedal was never pushed down- it is either one two things, (1) the click, click sound may be due to a bad battery connection or bad wire contact to the starter motor. (2) the neutral saftey switch which is attached to the clutch master cylinder on the inside of the vehicle, (under the dash) is deffective or needs adjusting-it is easier to simply replace it., no complex tools are needed for either repair, just a voltmeter to check wire connections on the battery to starter motor, or a small screwdriver driven socket to remove the screws holding the lower part of the dash together (below the steering column)- I hope this was helpful, I ran into a lot of problems after I swapped an engine and rebuilt the transmission on my 98 s10 but I eventually worked most of the problems out.

Oct 25, 2008 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...