Question about 1994 Dodge Dakota Club Cab
Installed pioneer stereo cannot find the red/blue wire from truck harness to hook to pioneer yellow constant 12v wire
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
glad you posted what colors you do have , cause 2 resources didn't match ,actually 3 , i did find a match to your colors was a 97 year model premium radio, so we have a match .....
black/ light green = ground
dark green = left front spkr +
purple = right front spkr +
blue/white = right rear spkr -
brown/blue = left rear spkr -
brown/yellow = left rear spkr +
blue/orange = right rear spkr +
black/yellow = park lamps
brown/red = left front spkr -
orange = dimmer signal
pink = fused battery +
green/red = radio choke relay
red/white = fused ignition
blue/red = right front spkr -
djmac62 is also an excellent answer
Posted on Jan 10, 2009
hmm well there are 2 solutions to this that i can give cause i dont have the wiring diagram for that truck..
The first would be to set with a multimeter and test the wires under the dash for the hot, and axcessories wire.
The second would be to run 2 wires directly from the battery to the inside of the vehicle and connect the radio using that.
The second solution is self explained so lets discuss the first.
The truck came with an original radio. connected to this raid is a jack with a bunch of wires. remove the connector. with keys out the ignition test every wire until you get 12V.. thats your hot wire. this wire always has power. Now lable that wire and push it aside. turn the ignition on and test the remaining wires until you get 12v .. thats the ignition wire or acesories. this only has power with the ignition on. The remaining paired wires are for the speakers. connect the new deck and vonnect the wires one pair at a time to determine their location. or ypu can look at the wires connect directly to the speakers to see which wires go to which. .. you can use the body of the truck as a ground.
Posted on Apr 02, 2009
I'm assuming you're just going to splice into the tail light wiring so that's what these wire colors are:
at the tail lamp 3 way connector:
black and yellow = park lamp
dark green and brown = left turn signal
there should be another connector with violet and black wire for reverse lights.
the stop lights are turned on through the turn signal circuits.
Posted on Apr 12, 2009
Get a tester light the type with an alligator clip and a sharp point.
Check each wire for your brake lights,blinkers etc.
i.e. With the blinker light on find the correct wire and splice into it with the corresponding light on the trailer. ( DO NOT CUT THE TRUCKS WIRE)
Remove the covering and twist the plug wires around it and tape or shrink wrap if you can.
Hope this helps
Posted on Apr 19, 2009
Tips for a great answer:
Dec 03, 2016 | 2006 Dodge Dakota
Mar 30, 2016 | Dodge Cars & Trucks
Sep 23, 2014 | 1991 Dodge Dakota
Jun 29, 2012 | Cars & Trucks
Nov 14, 2010 | Dodge Shadow Cars & Trucks
Aug 15, 2010 | 1996 Dodge Avenger
Mar 06, 2010 | 1994 Dodge Dakota Club Cab
Feb 27, 2010 | 2002 Dodge Intrepid
Feb 21, 2009 | 1995 Jeep Grand Cherokee
Jan 18, 2009 | 1997 Dodge Dakota
Sep 16, 2014 | 1994 Dodge Dakota Club Cab
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: