Question about Chevrolet Uplander LS

Open Question

Engine cranks n backfires throught the troattle body n won't start

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
mrgreenz
  • 962 Answers

SOURCE: Engine cranks, won't start

That does not sound good. It seems that you may have broken or worn rings or pistons. You could try timing the engine and see if that is not a problem but I think it is a bad piston and rings.

Posted on Nov 14, 2008

Ad
  • 508 Answers

SOURCE: 1994 chevy c1500 4.3 lt v6...the truck cranks but runs with a hea

jumped time or burnt valve

Posted on Jul 01, 2009

SOURCE: Why won,t my 1994 Saturn start?

Take it to a mechanic.

Posted on Mar 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 susuki forenza won't start after i put new head and put in time ,ran good for thirty minutes


Old post but , this answer covers all , of this type symptoms.
new head,
ran for 30 minutes
so does it crank ? ok? if not dont crank, it can start.
so crank is next. (first)
backfiring (true to the air cleaner) usually means TIMING IS way off and sure engines can start with timing way off and then stall and flood out.
nothing new there.
you did not time the engine correctly.

get the FSM on engine. read the pages.
or go to alldata.com and read that.
for others searching using google, my lil. contribution;

Jan 27, 2013 | 2004 Suzuki Forenza

1 Answer

1998 chevy venture won`t start. cranks over pops and backfires, was running great till it shut off when I was driving it. obd says no codes found


unplug the MAF sensor and see if that helps.

I assume you have spark since it is backfiring. Will it start if you use a little carb spray in the throttle body?

If it does than you have a fuel issue. Check fuel pressure. You should see more than 35 psi roughly. If there is no fuel pressure than check for power to the pump (the larger of the two grey wires at the pump). If there is power than the fuel pump would be the first thing I suspected.

Mar 06, 2012 | 1998 Chevrolet Venture Cargo

1 Answer

Why won,t my 1994 Saturn start?


Take it to a mechanic.

Mar 03, 2012 | Cars & Trucks

1 Answer

Kickback while cranking


I am assuming you have the vortech engine...but regardless it sounds like a fuel pressure regulator problem to me..i can guarantee that it isn't in the starter. Being as it's intermittent I would start by checking all of your vacuum lines and by buying some spray injector/throttle body spray and cleaning your throttle body..make sure that you clean your throttle plate..(the round plate that is in the body that opens w/ accelerator)..use a small brush and make sure you get as much carbon off of the inner and outer bore edges as possible..start there. The vortechs are known for their fuel pressure regulators going out though.

Mar 02, 2012 | Cars & Trucks

1 Answer

Have a 1999 Kia Sportage that won't start. Have changed Head gasket and set timing. Have also check to see if getting spark and am getting spark. Will crank but won't start.


dose it backfire when you crank it over. if it dose your timing is off. If it dosent backfire when you crank it then look at all your wires and make shur you pulged ever thing in. and if you have one ground not hooked up that can cause a no start do you have fuel?
let me know and we will help more if needed

stockam auto

Jul 11, 2011 | 1999 Kia Sportage

2 Answers

Engine just turns and turns. I let it sit for a


do a code search it can be found on yahoo for your car failing that borow a code reader from local rentel shop they are usually 10 = 30 per day and worth the money

Jan 16, 2010 | 1992 Oldsmobile Cutlass Ciera

2 Answers

B16A SWAP NO VTEC,CHECK ENGINE LIGHT, IDLES @ 1900 RPM


Wiring faulty, sensor not connected or mismatch, the ECU will not operate normally until it get all required input from the various sensor.

May 24, 2009 | 1989 Honda CRX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...