Question about 2005 Ford F-150
The driver side front seat
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The headrest has on obvious button to adjust the height and another button kinda hidden to remove the headrest. The black plastic ring at the base where the metal poles insert into the seat is where the two buttons. You probably noticed the obvious on that sticks out of the side of one of the rings. The other plastic ring contains a similar button that is not noticeable due to it being flush with the side of the plastic ring. Adjust the headrest to its highest position, then locate the "hidden" button on the other plastic ring and depress it while lifting on the headrest and it should come out.
Posted on Feb 22, 2009
SOURCE: front headrest, ford focus
Seat Backrest — Front Printable View (404 KB)
WARNING: Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module. This will reduce the risk of injury in the event of an accidental deployment.
WARNING: Never probe the connectors on the air bag module. Doing so can result in air bag deployment, which can result in personal injury.
WARNING: Front seat back trim covers installed on seats equipped with side air bags cannot be repaired, they are to be replaced. Cleaning is permissible.
WARNING: To reduce the risk of personal injury, do not use any memory saver devices.
NOTE: If a seat equipped with a seat mounted side air bag and/or a safety belt pretensioner (if equipped) system is being serviced, the supplemental restraint system (SRS) must be depowered.
NOTE: The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a supplemental restraint system (SRS) fault.
NOTE: The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
Posted on Jun 02, 2009
The armrests have covers that can be removed. Locate the zipper on the arm rest. Once you unzip it pull it toward the back of the arm rest and this will expose the one bolt that hold the armrest on. You will need a large torx and rachet to get it off. Once you take out that bolt the armrest will come right off.
Posted on Apr 07, 2010
On the part that you squeeze to raise the head rest is a little hole on the inside between the 2 bars. You need to push a paper clip or something like that in the hole to release the stop and keep pushing as you lift. Once that is done then you can pull the rest out.
Posted on Apr 13, 2010
Tips for a great answer:
Apr 07, 2016 | Ford Cars & Trucks
Nov 08, 2014 | Hyundai Cars & Trucks
Sep 06, 2014 | Cars & Trucks
Aug 16, 2014 | 1994 Lincoln Mark VIII
Dec 27, 2010 | 2008 Ford Escape
Apr 05, 2009 | 1998 BMW 3 Series
Mar 03, 2009 | 1995 Volvo 960
Feb 12, 2009 | 1992 Audi 80
Sep 06, 2008 | 1995 Volkswagen Golf
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: