Question about Chevrolet Cars & Trucks

Open Question

2006 chev impala 3.5 coolant crossover torque specs

Coolant crossoverpipe torque

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine

Head Bolts
Step one 37 ft lbs then tignten 120 degrees more

Rocker arms
Step one 11 ft lbs then tighten 90 degresss more

Upper intake
89 inch lbs
Lower intake
132 inch lbs

Posted on Dec 02, 2008

Ad
  • 916 Answers

SOURCE: tightening head

New Headbolts are recommended

Long bolts are torqued to 46'lbs + 90 degrees.

Short bolts are torqued 43'lbs + 90 degrees.

Start in the center, and work to the edges, torquing the bolts in two stages.

Rockers are torqued to 22'lbs.

Posted on Dec 21, 2008

  • 1 Answer

SOURCE: 2000 f150 ford coolant crossover problems 5.4 liter engine

sitting timimg chain on 2000 f150 5,4

Posted on Jan 28, 2009

  • 22 Answers

SOURCE: pinion nut torque spec chev

Axle Preload and Backlash Specifications 8.0 Axle Preload and Backlash Specifications Application
Specification
Metric
English
Backlash
0.08-0.25 mm
0.003-0.010 in
Backlash (Preferred)
0.13-0.18 mm
0.005-0.007 in
Pinion Bearing Preload, New Bearings
1.7-3.4 N·m
15-30 lb in
Pinion Bearing Preload, Used Bearings
1.1-2.3 N·m
10-20 lb in
Pinion and Differential Case Bearing Preload, New Bearings
3.4-6.2 N·m
30-55 lb in
Pinion and Differential Case Bearing Preload, Used Bearings
2.8-5.1 N·m
25-45 lb in

Posted on May 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3.9l. What are the torque specs for the 3 bolts that attach the a/c compressor?


guessing but probably no more than 20 lbs - everything is aluminum.

Feb 16, 2016 | 2006 Chevrolet Impala

1 Answer

Where is the map sensor located on the car?


The 2006 Impala has 3 different motor options, on the 3.5 the map
sensor is located on the rear(left side of motor) of the upper
intake manifold under the black bracket that the spark plug wires
are routed over. You have to remove the two upper intake manifold
bolts to remove it. The bolts have a torque spec of 18 lb ft, and a
small amount of thread locker is recommended by GM after
reinstalling them.

Sep 02, 2015 | 2006 Chevrolet Impala

1 Answer

2009 chev impala rear wheel hub


2009 chev impala, what is torque on front hubs

Aug 23, 2012 | 2009 Chevrolet Impala LS

1 Answer

What is the torque setting for the valve covers on a 327 chevy engine? Its on a 1967 Chevy Impala but not original motor. Thanks!


The torque spec on the valve cover bolts is 3 ft pounds or 36 inch pounds.
This spec is good for all Chevy small blocks.

Jul 22, 2010 | 1983 Chevrolet Impala

1 Answer

2002 chev impala, what is the torque spec on front hubs with abs


if they are the bolts that hold the hub and bearing in place just get the as tight as you can like putting lug nut on your wheels. if it's the axle nut just go as tight as you can by hand or impact gun

Jan 11, 2010 | 2002 Chevrolet Impala

1 Answer

What is the torque spec for a frt wheel bearing half shaft nut for a 2003 chev impala


according to autowaresgroup.com the proper torque is 159 foot pounds

Oct 22, 2009 | 2003 Chevrolet Impala

1 Answer

Pinion nut torque spec chev


Axle Preload and Backlash Specifications 8.0 Axle Preload and Backlash Specifications Application
Specification
Metric
English
Backlash
0.08-0.25 mm
0.003-0.010 in
Backlash (Preferred)
0.13-0.18 mm
0.005-0.007 in
Pinion Bearing Preload, New Bearings
1.7-3.4 N·m
15-30 lb in
Pinion Bearing Preload, Used Bearings
1.1-2.3 N·m
10-20 lb in
Pinion and Differential Case Bearing Preload, New Bearings
3.4-6.2 N·m
30-55 lb in
Pinion and Differential Case Bearing Preload, Used Bearings
2.8-5.1 N·m
25-45 lb in

May 17, 2009 | 2006 Chevrolet Colorado

13 Answers

2006 Chevy Impala Heater only works when accelorater is depressed


Impalas are known for this issue, where the heating won't work properly.... usually caused by trapped air/bubbles in cooling system or slightly low coolant level. Park car so that the right front side is elevated and remove the coolant OVERFLOW bottle cap (NEVER the radiator cap) while engine is running.. This should allow the trapped air to escape. Also add a bit more coolant if needed.

Dec 25, 2008 | 2006 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...