Question about Cars & Trucks

Open Question

How do I Hotwire my 2000 Kia sportage - Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

rockitman187
  • 2559 Answers

SOURCE: 2000 kia sportage ex, 4 cyl.

Yes there is a sensor that controls Fuel/air ratio.It's called a MAF (mass air flow sensor)
But I think you should have the EGR (Exhaust gas recirculation)valve checked
and The TPS (throttle position sensor)maybe dirty.

Although may things can cause this issue,I would look at the items above first.


Please rate this a blue fixya

Posted on Feb 14, 2009

  • 4 Answers

SOURCE: 2000 kia sportage ex, 4 cyl.

Many of the Kia sportages have a problem with the coils.

There are 2 coils for each 2 cyl and they are located under the middle platic cap on the valve cover.

These coils will set a check engine light that blinks when misfiring and stays on steady when the motor is running smooth. Autozone or Advance auto have a scanner that can check all engine functions and will show a problem with # 2 and 4 cyl.

The coil packs are $39.00 to replace but check the codes first

Posted on Feb 17, 2009

localwonder
  • 6784 Answers

SOURCE: the Abs light came on and will not go out after i

This is just a consequential event. the ABS sensor module was probably going out and decide the trigger the alarm at the same time you initiated the hard brake during travel. replacing or resetting this sensor module Will fix this issue. the light will go off as well.


Please rate and god bless.

Posted on Mar 17, 2009

gh20s
  • 343 Answers

SOURCE: 2000 Sportage: where is the spark plugs located on a 2000 Kia Sp...

They are under the black plastic cover that is in the middle of your valve cover gasket. Remove the intake hose from the aluminum intake plenum on top of the valve cover and the silencer box against the firewall. Remove all the connectors from the sensors which should be 2 on the plenum and the 2 large vacuum hoses on the plenum. Then remove the 3 12mm bolts from the plenum at the throttle body and remove the plenum. You can reuse the throttle body gasket at the plenum so don't destroy it. All the other bolts are 10mm and use a screwdriver to loosen the clamps on the hose. The sensors have clips that you need to remove with a small screwdriver, then disconnect them. Remove the bolts on the cover and the cover. Then remove the bolts holding the coil packs down. Do one plug at a time. 2 of them are connected to the 2 plug wires and 2 are underneath the 2 coil packs. The connectors on the coil packs are fragile so remove them carefully. Reverse the steps to reinstall the plenum, etc.

Posted on May 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Repair manual for 2000 kia sportage


If you go to Kia.com you can create a free user profile and get all The factory manuals for your sportage...it's free.

Dec 27, 2013 | 2000 Kia Sportage

1 Answer

2000 KIA Sportage engine light on. Code po705


P0705 Transaxle range switch circuit malfunction (PRND321)

Aug 22, 2011 | 2000 Kia Sportage

4 Answers

Where can i get an online manual for my Kia Sportage 2000?


kia's website should have links to find what you need...

Mar 05, 2010 | 2000 Kia Sportage

2 Answers

Auto transmission hold light flashes and wont shift out of 3rd gear the power buton is off but the hold still blinksComments: Dec 28, 2009- Yes that was the first thing.I did then I changed tranny...


well what i would do first is smell the transmission fluid if it smell burnt the transmission must come out,if not drop the valve body and check for a stuck valve or a check ball stuck in the separator plate try that over and out joe cool

Jan 04, 2010 | 2000 Kia Sportage

1 Answer

I have a Kia SPORTAGE 2000.... wher is the


go to autozones website and type in your vehicle under parts locator section

Dec 02, 2009 | 2000 Kia Sportage

1 Answer

KIA Sportage 2000


it should be in the back on either side behind a little door

Mar 21, 2009 | 2000 Kia Sportage

2 Answers

Removal of starter for a 2000 Kia Sportage


YOU HAVE TO DO IT FROM THE BOTTOM THERE IS 1 12mm BOLT AND 1 NUT AND IT SHOULD COME OUT

Jan 28, 2009 | 2000 Kia Sportage

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...