Question about 2003 Chrysler Sebring
Bought car to have water pump replaced cause of a anti freeze leak. they said I didn't need pump but my engine gaskets all had to b replaced so they did that plus sent heads to be plained. said they put new clamps on all of pipes n tubes for anti freeze leak. 2 days later car wont start get it started and am getting a chocolate milk dripping under car. bring it back to mechanic he said my water pump broke cause the engine was air tight and caused an internal leak so now wants to replace water pump. has anyone ever heard of that
Posted by Anonymous on
Yes, your water pump attaches to the front of the engine block. If a leak opens up between the two, coolant goes into the crankcase along with oil. That means water and oil are being circulated through the bearings and cylinders of your engine. Don't drive it in this condition.
Posted on May 10, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: small antifreeze leak after oil
open the reservoir when cold refill with prestone dont drive with empty reservoir it might overheat and cause aditionnel problem hope its a fix fpr our problem and fixya for my rating thank you pierre
Posted on Aug 03, 2008
It depends on where the leak is coming from. If the water pump is leaking, it has a hole on the bottom of it. You will see a trail of dried anti freeze coming from the bottom of it, indicating a bad water pump. It's best to dry everything off, crank it up and let it come to operating temp and check for where the leak is coming from. It may just be an old hose or loose clamp.
Posted on Nov 20, 2008
HAVE SEEN THIS BEFORE AND THE STARTER HAS BEEN THE CULPRIT..HAVE NEVER REPLACED A FUEL PUMP ON ONE OF THESE VEHICLES AT ALL
Posted on Aug 31, 2009
Testimonial: "I replaced the starter. This job is quite substantial. Also found the nut connecting the cable to the starter coil was not tight. I think it is fixed."
water pump ,its a plastic impeller and its loose on the shaft ,,,,,had one a while ago exactly the same but the first time i came across this on a saab i done the same as you ,changed everything ,felt a right you know what
Posted on Sep 01, 2009
1st make sure your cooling fans turn on. If they do, you probably have air in your cooling system. If you don't know where the bleed valve is or how to bleed the cooling system, check out this link. COOLANT BLEED VALVE
Posted on Sep 19, 2010
Tips for a great answer:
Aug 16, 2014 | Cars & Trucks
Aug 26, 2012 | 2003 Cadillac CTS
Sep 20, 2011 | Chevrolet Chevy Cars & Trucks
Feb 06, 2011 | 2004 Suzuki Forenza
May 03, 2010 | 1986 Toyota MR2
Feb 18, 2010 | 2004 Dodge Ram 1500
Feb 18, 2010 | 1999 Saab 9-5
Jun 08, 2008 | 1997 Cadillac Catera
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: