Question about Cars & Trucks

Open Question

On my monthly mogull pendulum clock the hands stop turning but everything else appears to be working still

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How doI set the clock


Setting the Time (Without Date Display) If your vehicle has an AM/FM base radio with a single CD player and preset buttons numbered one through six, the radio will have a clock button for setting the time. You can set the time by following these steps: 1. Press the clock button until the hour numbers begin flashing on the display. Press the clock button a second time and the minute numbers will begin flashing on the display. 2. While either the hour or the minute numbers are flashing, turn the tune knob, located on the upper right side of the radio, clockwise or counterclockwise to increase or decrease the time. Instead of using the tune knob, you can also press the SEEK, FWD (forward), or REV (reverse) buttons to adjust the time. 3. Press the clock button again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing will stop after five seconds and the current time displayed will be automatically set. To change the time default setting from 12 hour to 24 hour, press the clock button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H are displayed, press the pushbutton located under the desired option to select the default. Press the clock button again to apply the selected default, or let the screen time out. Setting the Time (With Date Display) If your vehicle has a radio with a single CD player or a CD with DVD player, the radio will have a clock button for setting the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the clock button and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) will appear on the display. 220 3. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, will increase by one. • Another way to increase the time or date, is to press the right SEEK arrow or FWD (forward) button. • To decrease, press the left SEEK arrow or REV (reverse) button. You can also turn the tune knob, located on the upper right side of the radio, to adjust the selected setting. The date will not automatically display. The only way to see the date is by pressing the clock button when the radio is on. The date with display will time out after a few seconds and go back to the normal radio and time display. If your vehicle has a radio with a six-disc CD player, the radio will have a MENU button instead of the clock button to set the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the MENU button. Once the clock option is displayed. 3. Press the pushbutton located under that label. The HR, MIN, MM, DD, YYYY will appear on the display. 4. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, will increase by one. • Another way to increase the time or date, is to press the right SEEK arrow or FWD (forward) button. • To decrease, press the left SEEK arrow or REV (reverse) button. You can also turn the tune knob, located on the upper right side of the radio, to adjust the selected setting. The date will not automatically display. The only way to see the date is by pressing the MENU button and then the clock button when the radio is on. The date with display will time out after a few seconds and go back to the normal radio and time display. 221 To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year, follow these instructions: 1. Press the clock button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) are displayed. 2. Press the pushbutton located under the desired option. 3. Press the clock or MENU button again to apply the selected default, or let the screen time out

Nov 10, 2016 | 2007 Pontiac Torrent

1 Answer

Volvo s80 clock


Unfortunately, this seems to be a common problem. The fuse will likely be for part of the instrument cluster.
If you aren't seeing any other issues, then it's probably a problem with the clock.
On the other hand, if you are seeing other issues, there is a possibility that it is the processor (yes, there's a separate processor for dashboard functions and instruments).

Jul 19, 2014 | 1999 Volvo S80

1 Answer

No dash lights when headlights are turned on. Everything works fine on my vehicle EXCEPT today the panel lights don't work. Turn signals, hazard blinker, oil gauge, rpm gauge, speedometer, drive shift...


there is a regulator for the display brightness, you may have it turn'd down or it has stopped working;. it controls the brightness at which the dash lights are. usually has a speedo sign on it. goes up and down. it works with the main light and is conecter to them on the same lighting board if it has gone then a new light swtch control switch will be needed.

Oct 13, 2013 | 2001 Chrysler Town & Country

1 Answer

Toyota prado 2007 clock reset


I had to just Reset my Clock after the battery was disconnected on my Prado 120 series Grande, firstly turn ignition on and press the 2 outer buttons (of 4) in front of the clock for several seconds, ILLU will appear on the face, with the inner buttons you can turn the brightness/illumination of the clock up to down, then press the left hand button again and by using the inner buttons.....using the left hand inner button to adjust hours and the right hand inner to do minutes, then press the out right button several times to set. (during the last procedure be careful not to reset the Altimeter and the compass)
I hope this helps as this is the only thread on here about this

Jul 26, 2013 | Toyota Land Cruiser Cars & Trucks

1 Answer

Radio/Clock will not play or appear on screen


You should check with your dealer for how to reset the radio after someone has tampered with it. This has happened to me and it appears someone had tried to remove the Bose stereo...thorough detailing!

Jun 16, 2013 | 2003 Nissan Altima

1 Answer

We have a 1995 Chevy Cavlier and this vehecile just stopped running we were told that it was the ignition mogule so we had that tested and it was fine and then we were told that it was the computer so we...


it seems like you may have a bad crankshaft sensor,location--bottom engine beside crankshaft,you've replaced everything else you can test the sensor to see if it's bad w/multimeter

Aug 13, 2010 | Chevrolet Cavalier Cars & Trucks

2 Answers

Volvo s40 seatbelt wont release from drivers side door


The angle pendulum may be locked up and / or twisted. You may have to pull with both hands while standing with the door open....

Feb 21, 2010 | 2002 Ford Mustang

2 Answers

Clock stops intermittently on pontiac vibe..everything else works ok..


what do you mean STOPS? goes to 1:00 o clock? turns off when driving? loses time? keeps time but sometimes wont light up??

Sep 24, 2009 | 2004 Pontiac Vibe

1 Answer

Error codeP1694 no bus


Hello
Welcome to FixYa
in the driver side kick panel down by your foot(behind it) there is BCM body control mogul there is 1 of 2 problems there can be a loose ground here or the mogul has gone bad here is a link to have it repaired,
RD
http://ecmoutlet.com/

02785a9.png

Jan 12, 2009 | 1999 Jeep Cherokee

1 Answer

I have a 2000 passat. We changed the brakes and now the ABS warning light, buzzer and "service manual" keeps coming on the dash. Any ideas what it might be?? Thanks


To stop the service interval warning and sound coming on please follow the following steps.
1. insert key into ignition. 2. using right hand press and hold the odometer reset stalk. 3 using your left hand turn on the ignition ( dont start the Car) 4 now use your left hand to press the clock adjust stalk and turnit to the left. ( just advance the time by 1 minute) 5 release both stalks and then turn ignition off , then on again and your service warnig light and sound will now not appear for the next 5000 miles. ( repeat the above when it comes on again) This will also save you £30.00 for the garage to do it.

Jul 28, 2008 | 1999 Volkswagen Passat

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...