Question about Cars & Trucks

Open Question

Location of crank angle sensor on 1999 ford laser

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

66 chrgr
  • 1011 Answers

SOURCE: Crank sensor location 1999 dodge durango

the crank sensor is located passenger side back of the engine were the trans and engine come together .there are 2 - 13mm.bolts that bolt to top of the engine.

Posted on Feb 22, 2009

  • 701 Answers

SOURCE: need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter

Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger

Posted on May 06, 2009

localwonder
  • 6784 Answers

SOURCE: crank angle sensor location

The crank sensor is always located next to the crankshaft pulley. it will be inserted into the block with the top part of the housing half way out. you cant miss the wires leading into the tip of the housing next to the crank shaft pulley.

Posted on May 23, 2009

kidspeedy
  • 321 Answers

SOURCE: knock sensor 1996 v6 3.3 nissan pathfinder

The Crankshaft Position Sensor is located: Under hood, driver side, front engine area, mounted rear of crankshaft pulley
The Knock Sensor is located: Under hood, center, front engine area, below intake manifold, mounted on block

Posted on Jun 14, 2009

NismoMaster
  • 146 Answers

SOURCE: Ka24e locate the crank angle sensor

The sensor is located in the bottom inside of the distributor.

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will the oil pressure sensor prevent ignition to the motor? 1999 Ford Laser - KN or Mazda 323


no oil sensor not related

fuel ,spark a broken timing belt

fuel
pump or relay you should be able to hear the fuel pump working
if engine light is on
crank angle sensor

Nov 05, 2016 | Ford Cars & Trucks

1 Answer

Location of crank position sensor for 1999 ford windstar 3.8 se


Crankshaft position sensor is mounted on the engine front cover next to the crankshaft trigger wheel, below electronic ignition coil pack on transmission housing .

Mar 29, 2014 | 1999 Ford Windstar

1 Answer

Location of cam and crank angle sensor in 96 N15


The cam and crank position sensor can be found in the front of the crank on the engine block below or next to the water pump in many applications.
It can also be located on the main crank pully or the flywheel.

Feb 09, 2012 | Nissan Pulsar Cars & Trucks

1 Answer

How do i replace the crank position sensor on a 2000 jeep grand cherokee


If you have the type of crank angle sensor shown in the image, then it will be located on the bell-housing towards the top of the bell-housing and usually on the drivers side. Dis-connect the faulty crank angle sensor and then un-bolt the two bolts that secure the crank angle sensor to the bell-housing and then remove the sensor. The best access to the crank angle sensor is from under the vehicle.


47ada7e.jpg

Jun 21, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Will not start. Battery,altenator,solenoid,connections good


Hook up a scan tool and check the codes, there are sensors that will prevent the engine from starting, like the crank angle sensor.

Nov 14, 2009 | 1999 Ford Expedition

1 Answer

1999 mitsubishi eclipse 2.0L na. no start. will crank. no power to coil pack. no codes. cam and crank sensor replaced. still no start or spark.


On this model engine, the power to the coil pack is delivered directly from the power transistors located inside the PCM.
If you are not getting the signal to fire going into the coil, verify you are getting a good waveform from the crank angle sensor, and that the wiring from it to the PCM is intact. If the crank sensor is delivering signal to the PCM, and the PCM is not generating pulse via the internal power transistors, the PCM has failed (the power transistors blow open, it is fairly common on this Chrysler PCM).

Oct 30, 2009 | 1999 Mitsubishi Eclipse

1 Answer

1999 ford mondeo has no spark . changed coil still no spark


IT IS MOST LIKELY YOUR CRANK ANGLE SENSOR IF YOU GET AN ENGINE LIGHT COME ON THAT MEANS THERE IS A CODE STORED YOU WILL HAVE TO GO TO A DEALER TO CHECK THE CODES

Sep 10, 2009 | Ford Focus Cars & Trucks

1 Answer

Crank angle sensor location


The crank sensor is always located next to the crankshaft pulley. it will be inserted into the block with the top part of the housing half way out. you cant miss the wires leading into the tip of the housing next to the crank shaft pulley.

May 23, 2009 | Nissan Cars & Trucks

1 Answer

Where is the crank sensor located on a 1999 nissan altima FWD 5 speed standard?


Hello Dixie...Nissan used a crank angle sensor on the 2.4 litre in 1999. It is located inside the distributor.
I hope this answers your question.

May 11, 2009 | 2008 Nissan Altima

1 Answer

Truck will not start


STARTER SOLENOID ON THE FIREWALL

May 31, 2008 | 1999 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...