Question about 2005 Chevrolet Silverado

Open Question

2004 chevy cps problem getting marks on end of sencer

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2004 chevy cavalier 2.2 ecotech where is the intake side of engine ,where is #1 piston,how to set timing chain

If it is a 4 pot inline engine the 1 piston is the one at the waterpump end, the end away from the gearbox/transmission.
To change timing chain or belt on any vehicle remove the timing cover and align the marks on the pulleys to the timing marks on the engine block. Ensuring that you do not move them from their positions means that the process is made much easier. An experienced mechanic could be helpdul

Jul 07, 2015 | Cars & Trucks

1 Answer

Where is the abs sencer located on a 2004 chevy trailblazer

The ABS sensor is located in the Front wheel hub

May 27, 2014 | 2004 Chevrolet Blazer

1 Answer

Ford f150 2004 accelerator position sencer

look up around and under fuel pedal if not follow the wire from fuel pedal

Apr 28, 2014 | 2005 Ford F-150 SuperCab

1 Answer

I have a 94 chevy lumina it idles high in park and when i put it in gear it stalls i have replaced (one of the o2 sencers, egr vaule, map sencer, trottle sencer, and another sencer but not sure what it is....

throttle position sensor can cause the high idle as will a hole in the egr valve tube as far as stalling as soon as u put in to gear could be torque converter not unlocking but id check the egr tube first

Jun 07, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

Abs light stays on and traction control stays off in my chevy impala ls the transmission is acting up in drive i took out a fuse called [trans sol] now it drives but acts up in reverse

abs, traction control, tire pressure monitor and fuel economy indicators all use a speed sencer in the wheel hubs, save yourself a lot of greaf and have a mechanic do a code read and test the sencers, i had the same issue and it messes up the whole system, i ended up replacing one hub assembly for about $190,
as for your transmission acting up, put the fuse back in and change the fluid, DO NOT HAVE THE TRANNY FLUSHED, JUST A FLUID CHANGE!!! if you want to drive another day. todays tranmissions are way more complex than they need to be and have many solinoids and sencers that can and do fail, good luck.

Feb 24, 2010 | 2000 Chevrolet Impala

1 Answer

Lots of black smoke comming out exhoust pipe

It sounds like your fuel pressure regulator is bad. It is located on the end of one of the fuel rails, it will have a vacum line hooked to it. Pull the vac line as soon as you shut it off, if there is gas in the vac line the diaphram is bad or it could be stuck open that is why you have black smoke and are using alot of fuel. You should be able to purchase for around $60.00

Mar 13, 2009 | 1997 Chevrolet K1500

1 Answer

Coolent temp sencer

Trace the upper hose back to the engine the sensor is located on the head thee here is a pic of it

Jan 12, 2009 | 2004 Dodge Ram 2500

1 Answer

Fuel and coolant gauges don't work

you should check all the fuses and check the colent sencer on the block and check all the electrical conections coming from the tank if cant find any thing check the cluster and if bad replace

Jan 05, 2009 | 2004 Chevrolet Avalanche

Not finding what you are looking for?
2005 Chevrolet Silverado Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

80263 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides