Question about 2005 Jeep Liberty Sport
When driving my 2005 jeep liberty it acted like it was going to cut out on me so I pulled over to the shoulder of the road and checked the belts and fluids it was all okay. I was when trying to get back on the road my 2005 Jeep Liberty Sport would not go in drive or reverse, it was like it was in neutral.
check tranny level using the operators guide instructions do not guess
do not over fill a tranny
Posted on May 03, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
put the back of car on jack stands and secure the front tires so it does not roll and then remove the bolts off the back of the caliper there is normally two one at top and one at bottom and spray it with some kind of oil for rust and make sure you have the right size socket before you try to loosen them and once caliper is off and the old pads removed take one of the old pads and squeeze the piston on the caliper back in by using a "C" clamp and also remove some of the brake fluid from the master cylinder before you do this put the new ones back on and check the brake fluid and make sure it is full and then pump the brakes to make sure you have a good pedal also put some "No Squeak" brake stop on the back of the pads so they don't squeak they will have that where you buy the pads from
Posted on Mar 01, 2009
Ratio codes generally indicate a pressure loss & slipping which the computer reads as a gear ratio problem. Likely you need a rebuild.
Posted on Mar 16, 2009
just a suggestion but I had this with another make fwd and I had to put inreverse and drive several hundred feet and tehn switch out while i was driving
Posted on Aug 29, 2009
If you have tested fuses and bulbs with test light,and they check out,
the next step is to put you jeep in reverse with the key on,and use your test light to probe the wires before they enter the bulb sockets for power,if you have power replace sockets,if not check to make sure wires are still connected to back up light switch on trans,if you find no problem there,replace the switch
Posted on Dec 04, 2009
Testimonial: "Thank you for the info on my jeep. I brought it to my mechanic and he could not find where the new switch goes.I will bring it to the dealer."
Tips for a great answer:
Nov 03, 2013 | 2005 Jeep Liberty
May 14, 2011 | 2005 Jeep Liberty
Apr 04, 2011 | 2002 Jeep Liberty
Dec 30, 2009 | 2005 Jeep Liberty
Dec 15, 2009 | 2005 Jeep Liberty
Aug 29, 2009 | 2005 Jeep Liberty
Mar 21, 2009 | 2005 Jeep Liberty
Jan 15, 2009 | 2003 Jeep Liberty
158 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: