Question about Ford Cars & Trucks

Open Question

Removal of upper control arm ford courier - Ford Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: front upper ball joint replacement

The dealer's answer (if you are interested).......

The ball joint is pressed into the upper control arm and has a tapered stud for attachment to the steering knuckle. The ball joint stud is attached and locked into the steering knuckle using a special nut. The ball joint is a sealed-for-life type and requires no maintenance. If the ball joint is defective it will require replacement of the entire upper control arm.

Sorry.

Posted on Jun 20, 2008

Ad
  • 255 Answers

SOURCE: upper control arm on a 2000 ford ranger

Hi ,some control arms come like that ,(either bolted or fitted) just be sure that is the same size of control arm by comparing them together,....

Posted on Aug 31, 2008

blueextc3221
  • 15935 Answers

SOURCE: How to change upper control arm on 1996 Honda Civic DX ?

UPPER CONTROL ARM:

Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be replaced.

  1. Raise and support the vehicle safely.
  2. Remove the front wheels. Support the lower control arm assembly with a floor jack.
  3. Separate the upper ball joint from the steering knuckle using a ball joint separator tool.
  4. Remove the self-locking nuts from the upper arm anchor bolts. Remove the upper arm from the vehicle.

Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be replaced.
To install:
Use new self-locking nuts when installing the upper arm and strut.
  1. Install the upper control arm assembly into the strut tower.
  2. Connect the upper ball joint.
  3. Install the front wheels and lower the vehicle.
  4. With all four of the vehicle's wheels on the ground, torque the upper control arm nuts to 47 ft. lbs. (65 Nm). Torque the castle nut to 32 ft. lbs. (44 Nm); then, only tighten it enough to install a new cotter pin.
  5. Tighten the wheel nuts to 80 ft. lbs. (110 Nm).
  6. Check and adjust the vehicle's front end alignment.
The bushings on the front lower control arms are replaceable on most models.
This procedure requires the use of a press and may be above the skill range of the average driveway enthusiast. It is recommended that this procedure be done by a qualified machine shop if you are not skilled in the proper use of a press.
  1. Remove the lower control arm that is in need of new bushings.
It is recommended that both the left and right lower control arm bushings be replaced at the same time. The vehicles handling may become unstable if there are new bushings on one side of the car and worn ones on the other.
  1. Set up the control arm in a press.
  2. Using a impact socket of the correct length and size, press out the old bushing.
  3. Install the new bushing by slowly using the press to push it into the control arm.
  4. WARNINGExcessive force could cause the bushing to bend or tear so be careful.
  5. Once the bushing is properly seated in the control arm, remove the arm from the press and install it on the vehicle.

Posted on Apr 05, 2009

  • 145 Answers

SOURCE: removal/replacement of upper control arm bushing

the a arms need to be removed, and the bushings pressed in and out , then you will need to reinstall them and the truck will need a front end alignment. You really need a qualified person to do this.

Posted on Sep 16, 2009

angelo_mlc
  • 1035 Answers

SOURCE: how to repair the upper

Hi. Here's how to replace control arms

Upper Control Arm Removal & Installation 1. Raise and safely support the vehicle. 2. Remove the wheel and tire assembly. 3. Support the lower control arm with a transmission jack or equivalent adjustable jack. 4. Match mark the upper control arm adjusting cams. 5. If equipped with 4-wheel ABS, remove the speed sensor harness bracket bolt and position the harness aside. 6. Remove the cotter pin and castellated nut from the upper ball joint. Discard the cotter pin. 7. Using Pitman Arm Puller T64P-3590-F or equivalent, separate the ball joint from the wheel spindle. 8. Remove 2 nuts and bolts securing the upper control arm to the body brackets. 9. Remove the upper control arm and ball joint assembly from the vehicle. To install: 10. Align the match marks on the upper control arm adjusting cams. 11. Place the upper control arm in position to the body bracket and install 2 retaining bolts and nuts. Do not tighten at this time. 12. Install the ball joint stud to the wheel spindle and install the castellated nut. Tighten the nut to 56-77 ft.lbs. [76-104 Nm]. Install a new cotter pin. 13. Raise the lower control arm to position the control arms at normal curb height and tighten the front upper control arm retaining nut first, to 84-112 ft.lbs. [113-153 Nm] 14. With the vehicle still at curb height, tighten the upper control arm retaining nut to 84-112 ft.lbs. [113-153 Nm] 15. Remove the transmission jack or equivalent from under the lower control arm. 16. If equipped with 4-wheel ABS brake system, position the speed sensor harness and install the bracket bolt. Tighten the sensor bracket bolt to 62-80 inch lbs. [7-9 Nm]. 17. Install the wheel and tire assembly. Torque the lug nuts to 83-112 ft.lbs. [113-153 Nm]. 18. Lower the vehicle. 19. Check the alignment and adjust if not within specification. 20. Road test the vehicle and check for proper operation.

Posted on Sep 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Upper control arm


Here's a link on your upper control arm.

Jul 27, 2013 | 1992 Ford Thunderbird

1 Answer

How to change the control arm on a 96 thunderbird?


UPPER CONTROL ARM:

Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be replaced.
  1. Raise and support the vehicle safely.
  2. Remove the front wheels. Support the lower control arm assembly with a floor jack.
  3. Separate the upper ball joint from the steering knuckle using a ball joint separator tool.
  4. Remove the self-locking nuts from the upper arm anchor bolts. Remove the upper arm from the vehicle.

Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be replaced.

Oct 03, 2012 | Cars & Trucks

1 Answer

Can you show me detail pictures of step by step repair of ball joint and controll arm of 1990 ford thunderbird v6 3.1 automatc


prev.gif next.gif REMOVAL AND INSTALLATION Upper ball joints are not replaceable. The upper ball joint is part of the upper control arm bushing joint and is not serviced separately. If the upper ball joints are found to be defective, the entire upper control arm bushing joint assembly must be replaced. Lower Ball Joint INSPECTION
  1. Support the vehicle in normal driving position with ball joints loaded.
  2. Wipe the grease fitting and checking surface, so they are free of dirt and grease. The checking surface is the round boss into which the grease fitting is threaded.
  3. The checking surface should project outside the cover. If the checking surface is inside the cover, replace the lower arm assembly. prev.gif next.gif

Aug 26, 2010 | 1990 Ford Thunderbird

2 Answers

How to remove the upper ball joints on a 2001 Ford Explorer Sports track


You will need to jack up the vehicle and also support it by the lower control arms as well as the frame. Remove the front wheels and place them aside.unbolt the upper control arms.....and wedge a pickle fork between the upper balljoint and spindle to knock the upper balljoint loose. Then simply reinstall the new control arms....which have the balljoints in them already.install the balljoint nuts and cotter pins and then reinstall the wheels and lower truck back to the ground.Be sure to drive vehicle to an alignment shop asap so you do not start to eat up your tires. get back to me if you have any more questions...i'm here to help!!!!!

Nov 20, 2009 | 2001 Ford Explorer Sport Trac

1 Answer

How to replace uppe ball joint in Ford Crown


First make an appointment for a front end alignment which will be required after replacing the ball joint. Securely support the vehicle under the lower control arm at the outer end, the end nearest the tire. The upper ball joint is attached to the upper control arm with 2 large nuts. Under the nuts are cams with hex heads for adjusting caster and camber. Mark the position of these cams in a way that will allow you to reinstall them somewhere near the same position. Next remove the outer end of the joint from the steering knuckle an then remove the 2 nuts and both cams from the control arm end. Reinstall and get that alignment asap !

Oct 05, 2009 | 2000 Ford Crown Victoria

1 Answer

How do i change upper and lower ball joints on a 2002 explorer sport


the lower ball joints have to be pressed into the lower control arms.The upper ball joints are part of the upper control arm so the upper control arms have to be replaced

Jun 24, 2009 | 2002 Ford Explorer Sport

1 Answer

How to replace lower and upper ball joints Ford Explorer 1999


The upper ball joints are part of the upper control arms. The upper control arms have to be replaced.

Jun 23, 2009 | 1999 Ford Explorer

1 Answer

How to change upper control arm on 1996 Honda Civic DX ?


UPPER CONTROL ARM:

Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be replaced.
  1. Raise and support the vehicle safely.
  2. Remove the front wheels. Support the lower control arm assembly with a floor jack.
  3. Separate the upper ball joint from the steering knuckle using a ball joint separator tool.
  4. Remove the self-locking nuts from the upper arm anchor bolts. Remove the upper arm from the vehicle.

Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be replaced.
To install:
Use new self-locking nuts when installing the upper arm and strut.
  1. Install the upper control arm assembly into the strut tower.
  2. Connect the upper ball joint.
  3. Install the front wheels and lower the vehicle.
  4. With all four of the vehicle's wheels on the ground, torque the upper control arm nuts to 47 ft. lbs. (65 Nm). Torque the castle nut to 32 ft. lbs. (44 Nm); then, only tighten it enough to install a new cotter pin.
  5. Tighten the wheel nuts to 80 ft. lbs. (110 Nm).
  6. Check and adjust the vehicle's front end alignment.
The bushings on the front lower control arms are replaceable on most models.
This procedure requires the use of a press and may be above the skill range of the average driveway enthusiast. It is recommended that this procedure be done by a qualified machine shop if you are not skilled in the proper use of a press.
  1. Remove the lower control arm that is in need of new bushings.
It is recommended that both the left and right lower control arm bushings be replaced at the same time. The vehicles handling may become unstable if there are new bushings on one side of the car and worn ones on the other.
  1. Set up the control arm in a press.
  2. Using a impact socket of the correct length and size, press out the old bushing.
  3. Install the new bushing by slowly using the press to push it into the control arm.
  4. WARNINGExcessive force could cause the bushing to bend or tear so be careful.
  5. Once the bushing is properly seated in the control arm, remove the arm from the press and install it on the vehicle.

Apr 05, 2009 | 1996 Honda Civic

1 Answer

Upper control arm on a 2000 ford ranger


Hi ,some control arms come like that ,(either bolted or fitted) just be sure that is the same size of control arm by comparing them together,....

Aug 22, 2008 | 2000 Ford Ranger SuperCab

2 Answers

Ball joints???


You're not supposed to replace the uppers on a 98 ranger. They're not meant to be pressed out because its built in with the control arm as a single unit. Just buy new upper control arms and save yourself the trouble. Ford also claims you have to replace the control arm for the lowers as well, but that's BS. They can be replaced fairly easily with the proper tools.

Jul 17, 2008 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...