Question about Cars & Trucks

Open Question

9200i international truck dash gauges not working

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All the warning lights work but the gauges ,revcounter and speedo dont work all the fuses are working


Year/make/model??? Try slapping on the top of the dash area to see if it starts working again. If so, suspect an internal instrument cluster problem. Known problems for GMC

Jan 19, 2016 | Cars & Trucks

1 Answer

Every thing works no gauges working


None of my gauges will work, but my turn signal indicators ...

www.americanautowire.com/.../none-of-my-gauges-will-work-but-my-tu...
None of my gauges will work, but my turn signal indicators, high beam ... As we've discussed previously, anything electrical needs a 12 volt feed and ground to work. ... 09/28/2015 There are a number of new products coming in Nov/Dec this ...

my gauges quit working - CarGurus

www.cargurus.com > Questions > Ford > F-250 Super Duty

CarGurusSep 21, 2013 - my gauges quit working - My odometer, speedometer, fuel, tach, trip, and ... I tried fixing the wire and had the same problem....so I replaced the shift lever and everything is back to ... no gauges will work in dashboard 1 answer.

No dash gauges, but dash lights - Car Forums and Automotive Chat ...

www.automotiveforums.com > ... > Dodge > Caravan ' Voyager
Feb 6, 2010 - The dash lights work fine, so does everything else. The dash gaugesjust don't work. This is something that has been an intermittent problem ...

Dec 05, 2015 | Cars & Trucks

1 Answer

Dash gauges not working stops and starts 2004 cadillac escalde


Internal issue, common problem. Needs to be removed and sent out for repair at a speedo repair shop.

Dec 22, 2013 | Cars & Trucks

1 Answer

My 97 S-10 Blazer fuel guage wont work


Likely, it's the sender unit in the tank. To check wiring and your dash gauge, you can pull apart the connector at the fuel tank, find the wire for the gauge sender unit (its color coded-I dont kinow what the one for your car would be), and on the harness side(the one going to front of vehicle) use a jumper wire and ground that wire to the car frame(get me? you want to ground the wire going to your dash gauge)-with key on, your gauge working properly will move up to half-way or even full. That tells you your dash gauge is working and your wiring to gauge is good. If gauge doesn't move when grounded(double check for a good ground), then your dash gauge may be bad.

Oct 12, 2011 | 1997 Chevrolet Blazer

1 Answer

I have to bang on my dashboard for it to come on help!!


You may have a poor internal connection inside the dash itself. We have sent several of these dash units out for repairs for similar problems. Another common symptom is a speedometer that sticks or won't work and/or gauges that read erratically or stick. Good luck, hope this helps!

Sep 16, 2011 | 2003 Chevrolet Avalanche

1 Answer

2004 Chevy pickup. Everything on the dash board has quit working; speed odometer, fuel gauge etc.


Hello and welcome, this is a internal fault in the dash cluster. the dash cluster will have to be replaced. also the new cluster will have to set up and programmed for proper operation to function correctly. there is a slight chance you may have some warranty on this. GM is warranty these dash cluster for 7 years or 80,000 miles

May 29, 2011 | 2004 Chevrolet Silverado

1 Answer

The ecm codes we read from a 98 pontiac sunfire are throttle position sensor low voltage, egr valve open throttle pintle position, theft deterrent crank signal malfunction, serial communications...


Hi, airbag deployment rarely causing damage to the wiring in the dash. The gauge cluster may of been damaged internally, but this usually shows up right away after repairs are done. I would check the connector on the PCM it is a cam lock design and if its been damaged or not closed properly it can cause crazy things to happen to the gauges. Good luck.

Aug 25, 2010 | 1998 Pontiac Sunfire

1 Answer

Dash board gauges not working on voyager 2000


You need to check your main fuses under the hood first and then check them under the driver side dash board.

Jan 25, 2010 | 2000 Plymouth Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...