Question about Isuzu Cars & Trucks

Open Question

ISUZU TROOPER 1994 3.1gear knob removal

CANNOT REMOVE GEAR KNOB OK.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: vw passatt gaiter change

The clip seems to be a use once and destroy during removal. I used a nylon tie and the home mechanics friend (duct tape) to fasten the new gaiter. Not perfect but quite usable and avoided a trip to the dealer.

Posted on Oct 19, 2008

SOURCE: 2002 VOLVO S60 automatic

I want to change the boot on my 2003 Pasatt..It seems to be connected to the gear shift knob...How do I get the knob off ??

Posted on Oct 23, 2008

bmw_tech_38
  • 113 Answers

SOURCE: removing and fitting a new gear knob bmw e46 318i man trans

Hi joserosa if this is a manual gearbox you just have to grip the gear knob and pull upwards until the gear knob is removed, the same principle is applied for a auto box but hold in the release button while removing, regards Mark.

Posted on Jan 25, 2009

  • 1 Answer

SOURCE: Removing Factory Gear Shift Knob for 2001 Jetta

On my 2000 jetta glx, I had to replace both the shift knob and boot as one. It is built as one unit. You have to pull the boot up over the shift knob, break/bend a clip to "unlock" the shift knob then pull up. I hope the new knob you got has the boot built in and comes with a new clip.

Posted on Mar 27, 2009

  • 1 Answer

SOURCE: Starter removal - 1994 Isuzu Trooper

pull the starter away from the bellhousing and turn the drive end upwards then it will come out from the engine compartment tight i know but i have just done mine so i know it will come

Posted on Mar 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my ford freestyle gear indicator light how change it


Remove the PRNDL trim ring.
Remove the upper console panel.
Slide the lower shift knob bezel downward.
  1. Remove the bolt and lift up on the shift knob to remove.
Remove the lower shift knob bezel.
Disconnect the light bulb from the PRNDL bezel. an replace .

26002487-w0jffanovav232xjqcbliw5g-1-0.gif Don't think you need take shifter knob off . Just PRNDL trim plate an upper console plate . They should just pull up , use plastic trim tool to get it so you can get your fingers under an pull up carefully .

26002487-w0jffanovav232xjqcbliw5g-1-2.gif PRNDL trim plate

26002487-w0jffanovav232xjqcbliw5g-1-5.gif Light blub connector !

26002487-w0jffanovav232xjqcbliw5g-1-9.gif

Dec 11, 2015 | 2006 Ford Freestyle

1 Answer

How to timing the belt of isuzu 4jx1



stevenhurc_29.jpgbefore you remove belt time mark on cam gear as well as crankshaft pulley, the timming mark on the pump drive gear (lower gear in this picture) will not line up but thats ok line up the mark on pulley to rear cover at about 12 O clock when the belt is off.

Sep 08, 2011 | 1999 Isuzu Trooper

2 Answers

How do I remove the gear knob from my VW transporter T5 ?


Pull off the cap from the top of the gear knob which has the numbers on,under this you will find a torx screw,undo this screw and the knob will pull off

Jun 16, 2010 | 2001 Volkswagen Golf

1 Answer

How do i get my gear knob off bmw 325i


Some gear knobs have a set screw on them. Look at the base of the knob all the way around knob. If there is no set screw than it is on just tight with thread lock. You will need to use some force to remove. You also need to turn in a counter clockwise motion to remove.

Nov 27, 2009 | 1994 BMW 3 Series

1 Answer

My 2000 isuzu trooper reverse lights always stay on no matter what gear I am in. I need to know where to find the reverse light switch.


usually only 2 places it can be,,,under the car near the gear shift.....or under the centere consol inside the car, where the gear shift is, need to remove part of the centre consol to get to it

Jul 30, 2009 | 2000 Isuzu Trooper

1 Answer

Isuzu trooper stuck in 1st gear


Likely the forks on the shift rail inside the trans are sliding on the shaft or are worn. I believe your unit needs to be removed to check this.

Apr 15, 2009 | 1999 Isuzu Trooper

1 Answer

Gear shifter will not go into park


There is a plastic actuator stick under the shift knob. Remove the "horse shoe" clip from the shift knob and remove knob by pulling strait up. You can twist it right and left a very small amount to loosen the knob, but not much.
Once you have the shift knob removed you will see the plastic actuator stick. Push down on the stick and put shift lever in park. If that works, the shift knob or stick is worn out.
Let me know.
Regard,

Feb 12, 2009 | 2004 Pontiac Grand Am

1 Answer

Removing and fitting a new gear knob bmw e46 318i man trans


Hi joserosa if this is a manual gearbox you just have to grip the gear knob and pull upwards until the gear knob is removed, the same principle is applied for a auto box but hold in the release button while removing, regards Mark.

Jan 25, 2009 | 2001 BMW 325

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...