Question about 2001 Jeep Grand Cherokee

1 Answer

2000 Jeep Grand Cherokee 3,1TD fuel pressure shutoff valve

Shutoff valve not open,highpressure not

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

FSM time
buy the FSM for your car and engine, and COUNTRY.

Posted on Feb 15, 2014

  • 6 more comments 
  • Kalle Rein Feb 15, 2014

    Go to FB you comment!

  • _-__-___-_
    _-__-___-_ Feb 15, 2014

    this car is non usa,car and you need to get the book from your dealer your country. see next list, of engines used by Chysler word wide, now you see why not posting country makes ,help so hard. we dont have it here. in USA.

  • _-__-___-_
    _-__-___-_ Feb 15, 2014

    http://en.wikipedia.org/wiki/List_of_Chr...

  • _-__-___-_
    _-__-___-_ Feb 15, 2014

    sounds like you really have this engine.

  • _-__-___-_
    _-__-___-_ Feb 15, 2014

    VM Motori 531 OHV - 3.1 L (190 cu in) diesel

  • _-__-___-_
    _-__-___-_ Feb 15, 2014

    one why to work engines (no fsm) is get the books on above.

  • _-__-___-_
    _-__-___-_ Feb 15, 2014

    http://en.wikipedia.org/wiki/List_of_VM_...

  • _-__-___-_
    _-__-___-_ Feb 15, 2014

    i work to find the EFI system. type and books. Motori.

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
c17hydro
  • 2984 Answers

SOURCE: Where is the oil pressure sending unit located on

Removal & Installation

  1. Disconnect the negative cable from the battery.
  2. Raise vehicle on hoist.
  3. Remove front splash shield.
  4. Disconnect oil pressure sender connector (4).
  5. Remove the pressure sender (2).
6eaedba.gif
Oil pressure sending unit


To install:
  1. Install oil pressure sender.
  2. Connect oil pressure sender wire.
  3. Install front splash shield.
  4. Lower vehicle.
  5. Connect the negative battery cable.

Posted on Jan 12, 2010

  • 17 Answers

SOURCE: how to change oil pressure sending unit on jeep

First things first do you have a repair manual? If you don't have one get one, Changing the unit is realitively simple, you just disconnect the battery, disconnect the oil pressure sending unit's electrical connector, remove the sending unit, now most sending units are small and look like a short chubby spark plug with an electrical blade connector on the end of it. simply use a wrench to loosin and remove and install by screwing in and tightening and reconnecting the electrical connecter then the battery and your as good as new!

Posted on Feb 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does fault code P0007 mean for Dodge Nitro


That code thrown up on generic DTC definitions is "Fuel Shutoff Valve. A Control Circuit Open."
The fix???

Jul 23, 2015 | Dodge Cars & Trucks

1 Answer

Wiring diagram or service manual for grand cherokee 3,1td(2000y)


for what? WJ sure.

3.1 liter turbo diesel.
2000.
our books (USA) don't cover diesel , we dont have it. try EU, forum for help.
we have GAS.
the wiki tells me this.
I'd not touch it with out your real FSM on this. from JEEP (your country)
my guess a supplement booklet on this TD? at Jeep.

quote:
The 3.1 litre turbo-diesel on the 1999 Grand Cherokee was developed in conjunction with Detroit Diesel/VM Motori. It has an electronic injection pump, electronically-controlled, vacuum-actuated exhaust gas recirculation, and a special catalyst to control oxides of nitrogen (NOx). Manufactured in Cento, Italy, at 13,000 units per year. It was available in European models and meets the European stage III emissions.
  • Displacement: 3,124 cc (191 cu in)
  • Power: 104 kW (141 PS; 139 bhp)
  • Torque: 367 N·m (271 lb·ft)
  • Transmission: Four speed electronically controlled automatic

Feb 16, 2014 | Jeep Grand Cherokee Cars & Trucks

1 Answer

2002 jeep grand cherokee


I answered this already, you have a defective fuel pump pressure check valve.

Feb 10, 2012 | 2000 Jeep Cherokee

1 Answer

1993 jeep grand cherokee dies when temp gets to 210


Sound like a problem with the engine temperature sensor go to bad; this device send a warning alert at ECU (Engine Control Unit) to prevent and shutoff engine.

Sep 27, 2011 | 1993 Jeep Grand Cherokee

1 Answer

2000 jeep grand cherokee wont start how to check for fuel


on the fuel rail there should be a green cap romove it and there is like a tire valve there press it with a screw driver and see if fuel squirts out with pressure

Feb 28, 2011 | 2000 Jeep Grand Cherokee

1 Answer

Cranked to warm up, went to go to work and had shutoff. Now it wont crank at all and spits back through air intake


spitting through the intake means an intake vale is open during the compression stoke

common for these vehicles to loose pressure in the hydraulic lifters but end result is not typically what you are experiencing

you need to do a cylinder leak down and start an engine teardown to confirm

Feb 09, 2011 | 2000 Jeep Grand Cherokee

1 Answer

1996 jeep grand cherokee, interior lights wn't shutoff


Have you tried checking the dimmer switch for your instrument panel? I believe if the switch is slid all the way up it will cause the interior lights to stay on. Hope this helps.

Aloha,
Kalani

Jan 28, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Dont get heat


maybe the flow thru the internal matrix is poor due to the water pump being on its way out? Or you could have a small leak that is causing the water to boil under normal driving, have you got any loss of coolant or overheating in the engine - even slight?

Also is there a valve controlling flow thru the core, as some cars have a shutoff valve that may be stuck, should be electrical but may be cable operated on yours as its a 4wd jeep etc.

Jan 15, 2010 | 1999 Jeep Grand Cherokee

1 Answer

Where is the fuel filter on a 2000 grand cherokee


2000 Jeep Grand Cherokee 4WD 4.0L MFI 6cyl:
The Fuel Filter is located under vehicle, driver side, below bed area, front of fuel tank, mounted on chassis in fuel line.

17a3ee3.jpg

Fig. Fuel filter/pressure regulator location-1999-01 models.

For more details, can search in the Jeep WJ Repair Manual.

Hope helps with this (remember rated this help) Good luck.

Dec 29, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Alarm goes off for no reason. 97 Jeep grand Cherokee.


There is a security system built-in to the Jeep Grand Cherokee during these years. The reason the alarm goes off is because of a change in the electrical system (like shutting a door) that triggers the alarm. To stop the alarm, either disarm with the remote or unlock the door from the outside with the key. This will shutoff the alarm.

Mar 22, 2009 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...