Question about 1963 Buick Riviera
Turn lights come on but do not blink
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: turn signal is not blinking
There is a Turn Signal "Flasher" that should be on the Fuse Panel inside the Car. If not it will be in the Fuse Relay Box under the Hood. This is the Problem and needs to be Replaced. Let me know if you need more Help! Please Rate my Response, I need all the Help I can get! Thanks!
Posted on Jan 26, 2009
SOURCE: location of turn signal relay
It should be mounted to the firewall just to the left of the steering column under the instrument panel. But you really should pay attention to the post above. Especially if it's just one side. Turn the signal on, and look in front and back to see if the bulbs are lit. Then do the other side. If they aren' t on, they're burnt out and that's your problem.
Posted on May 04, 2009
This means you have a faulty relay. The relay is what causes the light to blink. They are usually a black plug that is in one of the fuse boxes, usually the one under the hood
Posted on Jun 17, 2009
traction switch is located next to drivers left knee on bottom of dash....you should be able to turn off the traction light there by just turning on the traction control.....the security light is telling you that there is a problem with your security system....could just need a new key with a new computer chip....make sure the key is clean and dry when using so it can read the chip....the security light comes on whenever your start the car and stays on for approximatley 2 minutes and then should go out....it is just a reminder....try this and see if it works....lock the door using the power switch on door.....close door and see if the security light comes on....watch and it should go out after about 2 minutes...if it does then your alarm is activated and working....to disarm you need to unlock the driver door with the key...anything else will set the alarm off and the lights will start flashing and the horn honking...after you set the alarm off you will always have to use the key to unlock the drivers door to turn off the alarm and reset the security system.
Posted on Aug 11, 2009
SOURCE: turn signal not working
i had this same problem and i alleviated it by replacing the column switch which isnt an easy task and I used a manual (which can be obtained at the library for free or you can buy one at your loccal book or auto parts shop)
Posted on Aug 26, 2009
Tips for a great answer:
May 08, 2014 | 1963 Buick Riviera
Mar 28, 2014 | 1990 Buick Riviera
Feb 14, 2014 | 1995 Buick Riviera
May 02, 2012 | 1995 Buick Riviera
Nov 25, 2010 | 1992 Buick Riviera
Jun 03, 2010 | 1992 Buick Riviera
Oct 18, 2009 | 1990 Buick Riviera
Nov 19, 2008 | 1997 Buick Riviera
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: