Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
ok cadillac for some reason has to be difficult about these things you actually have to take the whole tail light assembly out. . .here is what youre going to need:
1. socket wrench
2. number 10 socket (gm's nut of choice)
3. patience because it is easy to drop the nut be careful
ok so you have to open the trunk then take the plastic that holds the carpet down off. you do this by unscrewing the black screw on pegs (not sure what to call these things). after you do this pull the plastic thing hard because it is being held in place by some pegs other than the ones you have already removed. then remove all the side carpeting depending on which side youre changing. ok after this look directly behind the tail light assembly for 2-3 (i forget how many) bolt like pegs (my new favorite word) these are attached to the plastic tail light assembly. then take the nuts off of these pegs and then you should be able to tug the assembly off. then you do what the others say take out the socket and replace the bulb.
like i said cadillac makes **** hard to do. if you hate this wait til you have to take the whole bumper off to replace the headlight bulbs (might want to invest in some hid lights so you wont ever have to replace them)
Posted on Jul 26, 2009
drain the coolant.remove belt by rotating belt tensioner cllockwise. water pump pulley will require a holding tool to keep it from turning while removing bolts. access to air ratchet can sometimes eliminate the need to hold but be careful cause thats a good way to skin some knuckles. also make installation more difficult to obtain proper torque. after pulley is off just a few water pupm mounting bolts remain. clean and dry gasket surface very well before reinstalling.
Posted on Nov 07, 2009
Testimonial: "Very quick with a response, and good info!"
The brake light switch itself is located on the brake pedal follow it down until you see where it connects and unplug the connection ...after installation make sure the brake light switch is correctly adjusted by having a 2nd person stand behind the vehicle as you press the pedal the light should come on if not adjust the switch higher up by turning the switch inward ..or upwards by screwing it in if it constantly on unscrew it until lights go out and its fairly easy once you actually look at the part and the pedal ...i hope that helps you
Posted on Nov 13, 2009
I do not mean to be hurtful and it will take some time to do. Maybe all day if you have no experience. If you need instructions just maybe you should have some do it for you.
Posted on Feb 08, 2010
SOURCE: how do you remove the
You must remove the upper intake manifold, the upper intake is what the flexible air hose from the air cleaner connects to on the engine, the plastic trim covers over the the upper intake just snap off and on, it is a ball socket snap, carefully pull up at the corners of the plastic engine trim covers, and the bare aluminum upper intake is under that, there is no coil pack, each cylinder has its individual own coil over the spark plug, suggest you replace the plugs while all this is apart.
Posted on Jun 07, 2010
Tips for a great answer:
Oct 24, 2012 | 2005 Cadillac CTS 3.6
Jul 22, 2012 | 2005 Cadillac CTS
May 16, 2012 | Cadillac CTS Cars & Trucks
Feb 23, 2011 | 2005 Cadillac CTS
Jan 14, 2011 | 2005 Cadillac CTS
Dec 13, 2017 | Cars & Trucks
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: