Question about 2010 Honda Pilot EX-L

Open Question

Replacing headlight assembly on a 2010 Honda pilot

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

master e
  • 34 Answers

SOURCE: 2000 Honda Accord Headlight Assembly

what i suggest i can suggest is, buy a clear sealant, and seal the sides of the headlights.

the reason why is air can creep in tha lamps that's why it gets moisture (foggy) and dirty.

hope it helps.

Posted on Aug 27, 2008

  • 78 Answers

SOURCE: replacing headlamp of a 2004 Honda Pilot

i believe it is held in by a spring underneath the rubber boot the spring swings over like a door and hooks in a notch

Posted on Nov 15, 2008

  • 840 Answers

SOURCE: replacing the headlight assembly on a 1994 honda civic

alright you need to take the bumper off to start look at the top of the bumper take out the retainers up top then move to bottom of the bumper remove those retainers and then there are 2 bolts one each side remove them and pull the bumper off then you can replace the headlight/ Please rate my response thank you very much

Posted on Jan 31, 2009

SOURCE: Honda Pilot 2004: We

Check that you have the right fuse for it. If it is too high of an amperage, it will pop the head lamp bulbs. Most are 20 amp. Check to see if someone placed higher ones and replace to oem specs.

Posted on Jan 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda odyssey 2010 fender - how to remove driver side fender


Need to remove mirror this will allow you to remove the part behind mirror. You ?lso need to remove headlight assembly allowing the screws behind to be removed

Mar 22, 2016 | 2010 Honda Odyssey

1 Answer

How to replace Honda Pilot 2010 Blower Motor?


Now having never worked on one recently i cannot know but i would be inclined to look under the passenger side dash as most cars with AC seem to have them in this area ,Then follow your nose with the help of a torch

Dec 21, 2012 | 2010 Honda Pilot

1 Answer

REPLACE HEADLIGHT 2008 SPRINTER


On some cases there are few hidden clips holding the assembly from under hood,that has to be released to remove headlight .

There are few troubleshooting help links showing how to replace car headlights,i suggest you to refer the links to solve these issue.

--------
Click the link below:------
How to Replace a Headlight http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb


http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html


How to Replace a Park Light Assembly http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------
Low beam headlights Modification? http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------
Headlight Assembly Removal On Honda Accord http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html --------------- Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html-----------
How to Replace a Headlight Door http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

---------
All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------
How to replace HID headlight bulbs for lexus 400h? http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------
Working of Headlight switch?
------------
Both headlight bulbs blow together?
------------
Car headlight bulbs don't last long?



----------------
These will help.
Thanks.

Nov 23, 2012 | 2010 Mercedes-Benz Sprinter

2 Answers

How do I get to the front headlight to change it


Re: Replace headlight bulb

  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
BMW e46 HID Headlight Replace
get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-0.jpg

get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 22, 2012 | Cars & Trucks

2 Answers

Headlights wont work and dash and parking lights come when ignition switch is turned on. sometimes jiggling wires works. what is the problem?


Check out related help links with solutions to troubleshoot these problem.
Click the link below directly:---
Heater fan and headlights will not turn off with ignition off? http://technoanswers.blogspot.com/2012/01/heater-fan-and-headlights-will-not-turn.html

---------
High beams stopped working but headlights still work?

http://howtobyme.blogspot.com/2011/11/highbeams-stopped-working-but.html

---------------
Only one head light works on 2001 Dodge Caravan? http://howtobyme.blogspot.com/2011/11/only-one-head-light-works-on-2001-dodge.html

----------------
Headlight Assembly Removal On Honda Accord http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html ------------- Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html-----------
All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------
Headlight wiring diagram for 1997 Lincoln Town Car?

http://technoanswers.blogspot.in/2012/02/headlight-wiring-diagram-for-1997.html

-----------
Dash Lights And Front Marker Lights Flashing On And Off http://schematicsdiagram.blogspot.com/2012/10/dash-lights-and-front-marker-lights.html
---------- 2001 Chevrolet Tracker: Headlights and Dash lights Pulsating? http://whoisbyme.blogspot.in/2012/06/2001-chevrolet-tracker-headlights-and.html
--------- No parking lights and headlights not turning OFF? http://technoanswers.blogspot.com/2012/01/no-parking-lights-and-headlights-not.html
------------- How to replace HID headlight bulbs for lexus 400h? http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html
--------- Head Lights Comes ON by Itself? http://whoisbyme.blogspot.in/2012/07/head-lights-comes-on-by-itself.html
--------- Only high beams work but head lights not working on Ford F350?

http://howtobyme.blogspot.com/2011/11/only-high-beams-work-but-head-lights.html

-------------


Only high beams working on GMC Savana?---------
Working of Headlight switch?

----------
Both headlight bulbs blow together?
--------

Car headlight bulbs don't last long?


--------
How to replace Headlight Bulbs on Lincoln Town Car?

http://howtobyme.blogspot.com/2011/12/how-to-replace-headlight-bulbs-on.html


How to change headlight?

http://repairhelpcenter.blogspot.com/2011/12/how-to-change-headlight.html

-------------
Both headlights and turn signals not working? http://schematicsdiagram.blogspot.com/2011/12/both-headlights-and-turnsignals-not.html

----------
Headlights will not turn OFF on Ford expedition and car trailer?

http://technoanswers.blogspot.com/2012/01/headlights-will-not-turn-off-on-ford.html

----------
Headlight Assembly Removal on 2010 buick lacrosse? http://technoanswers.blogspot.in/2012/04/headlight-assembly-removal-on-2010.html
--------- Headlights flickering and car hesitates to start?

http://howtobyme.blogspot.in/2012/02/headlights-flickering-and-car-hesitates.html

---------
Hummers headlights flashes while start?

http://technoanswers.blogspot.in/2012/02/hummers-headlights-flashes-while-start.html

----------
Using non-AFS headlamp assembly for AFS assembly?

http://schematicsdiagram.blogspot.in/2012/02/using-non-afs-headlamp-assembly-for-afs.html

------------

How to replace Headlight Bulb on 2001 mitsubishi magna
http://www.howtorepairguide.com/2012/10/how-to-replace-headlight-bulb-on-2001.html

---------
These details will help.
Thanks.



Nov 22, 2012 | 1996 Pontiac Grand Am

1 Answer

2010 honda pilot center console removal due to vibration underneath


slide both seats all the way forward remove screws in sides of console if no screws on sides slide seats back and pull center from inside remove two bolts remove side skirt on each side screws under them remove ashtray center pocket screws under it also unplug wire connectors and remove

Jul 29, 2012 | 2010 Honda Pilot

2 Answers

How do i change my headlight assembly on a 2001 honda accord


HEADLIGHT REPLACEMENT

1. Remove the front bumper
2. Disconnect the connectors (A).
3. Remove the 5 mounting bolts (B), then remove the headlight assembly (C).

Fig. 21: Removing Mounting Bolts & Headlight Assembly
6_26_2012_3_27_45_pm.jpg

Jun 24, 2012 | 2001 Honda Accord

1 Answer

Honda Pilot 2004: We keep replacing headlights


Check that you have the right fuse for it. If it is too high of an amperage, it will pop the head lamp bulbs. Most are 20 amp. Check to see if someone placed higher ones and replace to oem specs.

Jan 06, 2011 | Honda Pilot Cars & Trucks

1 Answer

Dirt inside my headlight


  • Open the hood of your Honda Civic, and identify the headlight assembly that has the dirt inside of it. Depending on the year of your Civic and side of the headlight, you may need to move the power steering reservoir to gain access to the light assembly.
  • 2 Squeeze the clips on both sides of the headlight assembly to release the headlight connectors. Use your fingers to loosen the headlight, and pull the small plastic tab to loosen the rubber gasket from the frame.
  • 3 Unplug the wiring harness from the back of the bulb. Twist the bulb, to remove it from the headlamp assembly.
  • 4 Locate, and remove, the screws that hold the headlight casing in place. Once the screws have been removed, gently guide the headlight casing from the location.
  • 5 Inspect the assembly under a bright light, identifying any cracks that may be in the casing. If there is a crack, use a silicone sealant to seal the crack.
  • 6 Dry the assembly, using a towel and or hairdryer.
  • 7 Replace the assembly back into your Honda Civic, and secure it by replacing the screws you removed.
  • 8 Replace the rear gasket where the bulb is inserted with a new gasket. Insert the bulb, and twist it into place.
  • 9 Reattach the bulb wiring harness.
  • 10 Turn the lights on, and re-aim the light assembly. good job your done

  • Dec 18, 2010 | 2004 Honda Civic

    1 Answer

    2000 Honda Accord Headlight Assembly


    what i suggest i can suggest is, buy a clear sealant, and seal the sides of the headlights.

    the reason why is air can creep in tha lamps that's why it gets moisture (foggy) and dirty.

    hope it helps.

    Aug 24, 2008 | 2000 Honda Accord

    Not finding what you are looking for?
    2010 Honda Pilot EX-L Logo

    Related Topics:

    54 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    75197 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7782 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...