Question about 2001 Toyota Celica

1 Answer

Indicator lights all come on and stay on for 15 seconds

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 20,706 Answers

100% normal.?
but 15 is a tad long.
low car battery>?

the operator guide in all cars tells you this is the self test.
most are 5 sec, max.
the newer the cars , they seem longer, (more craap to test)

one lamp is the CEL is it 15seonds,
yes/no.
the CEL is 100% ECU controlled,
and if too long , that means its :
1: got low power , 12vdc too low. , better is 12.6v rested.
2: ECU is seeing huge faults. (scan it and see)
3: ECU bad.
in that order. no others.

first post for this world wide, never seen this or heard it ever.
of 1000s posts.
elaborate. please

Posted on Feb 19, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the service engine light mean on a 2015 Ford Edge


Service Engine Soon

If the Service Engine Soon indicator light stays lit after you've started the engine, the On Board Diagnostics system (OBD) has detected a malfunction of the vehicle emissions control system. Contact your authorized dealer as soon as possible.
If indicator light is blinking, an engine misfire may be occurring, which could damage your catalytic converter. Drive in a moderate fashion (avoid heavy acceleration and deceleration), and have your vehicle serviced immediately.*
The Service Engine Soon indicator light illuminates when the ignition is first turned on (prior to engine start) in order to test the bulb, as well as indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing.
Normally, the Service Engine Soon light will stay on until the engine is cranked, then turn itself off if no malfunctions are present. However, if after 15 seconds this light blinks eight times, it means that the vehicle is not ready for I/M testing.Check this link out Gary.
https://owner.ford.com/how-tos/vehicle-features/dashboard-instrument-cluster/warning-lamps-and-indicators.html

Jul 19, 2017 | Ford Cars & Trucks

2 Answers

How can i get a manual for 2005 jeep liberty ?


Owners manual.. Dealer with he VIN#. Mechanics manual, any parts store. It covers all the Liberty's.

Oct 27, 2015 | 2005 Jeep Liberty

1 Answer

Why does the Change Oil light stay on 15 seconds after starting car?


Try re-setting the oil change light and see if it quits. Should re-set itself. Not oil sending unit, that tells computer and light when there is a problem like no oil pressure.

Sep 02, 2014 | 2003 Chevrolet TrailBlazer

1 Answer

Why does the Change Oil light stay on for 15 extra seconds?


TAKE THE TRUCK BACK TO PEPBOY AND TELL THEM TO RESET THE SERVICE INDICATOR

Sep 02, 2014 | 2003 Chevrolet TrailBlazer

1 Answer

Theft light is flashing and car died this morning after started to miss


The theft indicator on the instrument cluster will operate as follows:
• When the ignition is OFF, the theft indicator will flash briefly every two seconds to indicate the SecuriLock system is protecting your vehicle.
• When the ignition is turned to ON or START, the theft indicator will light for three seconds and then go out. If the theft indicator stays on for an extended period of time or flashes rapidly, have the system serviced by your dealership or a qualified technician.

Hope helps.

Jan 12, 2011 | 2001 Ford Taurus

1 Answer

How do i reset the oil light on my 95 fleetwood cad


1993 BROUGHAM & 1993-96 FLEETWOOD
Oil Life Indicator
1. Oil life indicator will display CHANGE OIL when oil change is needed, based upon engine oil temperatures and driving patterns. After changing oil, reset
oil life indicator.
2. To reset, turn ignition switch to ON position. Do not start engine. Fully press and release accelerator pedal 3 times within 5 seconds. If CHANGE OIL light
comes on and stays on for 5 seconds, it did not reset. Reset system again.

Jun 08, 2010 | 1995 Cadillac Fleetwood

1 Answer

5 series' of 5 beeps in a row on start up


Check the Air Bag Indicator Light. When you turn the car on it should stay on for 6 seconds and then turn itself off. If a fault is detected in the system operation check, the indicator light will either fail to light, stay on continuously or flash. The flashing may not start until up to 30 seconds after the initial systems check.

If there is a fault in the system AND the air bag indicator light fails to light then an audible tone will alert you- it will be a set of 5 chimes (bells/beeps) five times in a row.

Have the Air Bag serviced and the indicator light bulb changed. Since the dash will be off in order to change the bulb, I would have all of the other dash lights changed at the same time. If one goes out, others will surely follow.

Good luck!

Corri R. / Service Writer

Jan 26, 2009 | 2002 Mazda Tribute

1 Answer

2005 Chevy Malibu Anti-theft system indicator light


I just had this to happen to me - here's what you do - when it will not crank - turn your key over to ACC and let it stay on here for 15 minutes, the THEFT SYSTEM light will stop flashing. Turn your key back to OFF then turn it over as normal when starting and it will start right back up! Found it out from an auto store! One lady paid over $700 and then found this out!!!

Jan 21, 2009 | 2005 Chevrolet Malibu

2 Answers

How to set up for 2005 pacifica garage door opener


how about a real answer......

1. Press and hold the two outer HomeLink buttons, and
release only when the indicator light begins to flash (after
20 seconds). Do not hold the buttons for longer than 30
seconds and do not repeat step one to program a second
and/or third hand-held transmitter to the remaining two
HomeLink buttons.

2. Position the end of your hand-held transmitter 1-3
inches (3-8 cm) away from the HomeLink buttons while
keeping the indicator light in view.
3. Simultaneously press and hold both the HomeLink
button that you want to train and the hand-held transmitter
buttons. Do not release the buttons until step 4
has been completed.

4. The HomeLink indicator light will flash slowly and
then rapidly after HomeLink successfully receives the
frequency signal from the hand-held transmitter. Release
both buttons after the indicator light changes from the
slow to the rapid flash.
5. Press and hold the just trained HomeLink button and
observe the indicator light. If the indicator light stays on
constantly, programming is complete
and your device
should activate when the HomeLink button is pressed
and released.

Dec 11, 2008 | 2005 Chrysler Pacifica

Not finding what you are looking for?
2001 Toyota Celica Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...