Question about 2006 Pontiac Torrent

Open Question

Fan stay on after turn off engine

As soon you start and stays on after and its not the relay

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: Radiator Fan's Run All The Time

There are 2 things that will cause this to happen. 1. The thermostat needs to be replaced and, 2. The coolant sensor can be bad. When I had this problem, I changed them both at the same time, she been just fine since then. Also, I had the check engine light on, and got the code from AutoZone (it's free!)

Posted on Apr 15, 2009

Ad
wracefans24
  • 1985 Answers

SOURCE: my car's inside fan stays on even when off mode

the blower motor resistor is probably the problem with the blower staying it,

Posted on Jan 24, 2010

loveamouse77
  • 6 Answers

SOURCE: why does the cooling fan stay on never shuts off?

If you are not the first owner it may be wired to the ignition, Previous owner may not have been able to get it to come on?

Posted on Aug 31, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When does the 3 relay aactivate cooling fan stArt on a 94 toyota Camry 3000 engine


Only two I think ac fan come on as soon as ac is turned on and the
engine depends on switch 188 degrees it schould be marked
on the side of switch also pull tjhe wire of switch when you ground
the one wire off switch fan schould come on if fan stays on all the time relays stuck if the motor random on and off relay or motor
first replace relay cheaper then replace switch ckek motor
sirect from battery always. Hot wire jump it.hope this helped

Jun 24, 2015 | Toyota Cars & Trucks

1 Answer

Cooling fan stays on after turning off car


Taken from other previous solution (but it's right): the cooling fans are switched off and on by a relay. either this relay bad and staying on all the time, or something else is bad and telling it to stay on all the time. you might unplug the engine coolant temp sensor and see if the fans switch off. if they do you have a bad temp sensor, if they don't you probably have a bad relay. they will test either for you at most car parts stores. the relay will be in the underhood power distribution box, it plugs in like a fuse. disconnect the battery negative terminal before you start unplugging things from the power distribution box. hope that helps

Apr 02, 2014 | 1992 Chrysler New Yorker

1 Answer

Mercedes clk55 engine suction fan stays on as soon as the key is turned on.The black and white wire on the fan has continous positive,when I remove relay P in the front fuse box (terminal 15) the fan


The fan control module is defective.....would scan codes in engine control module to insure this diagnosis is accurate. I've replaced quite a few on Mercedes Benz models. The reason for the scan of the engine control module is to insure the DME (engine control module is not commanding "ON" the engine cooling fan. The factory scan tool can view these commands. If the DME is not commanding the suction fan to operate...the fan module is indeed defective.

Scott, Porsche Master Tech 35 years.

Jan 12, 2014 | Cars & Trucks

1 Answer

1994 3.5 Concorde...engine fans stay on. Not overheating temp guage is only on 1/4 line.


Unplugging the sensors can make the fan run.
When the computer fails to get a signal from the sensors, it turns the fan on as a default step to keep the engine from overheating.
Its also possible the relay was stuck on.

Dec 19, 2012 | 1994 Chrysler Concorde

2 Answers

The radiator cooling fans start up soon after the engine is started and stay on - any ideas?


someone has wired the fan to stay on with the key on.....the coolant temp sensor is the culprit in most cases replace it.

Oct 10, 2010 | 2000 Ford Focus

2 Answers

My coolant is not working? when driveing it stays cool but as soon as i stop the fan dosnot kick in ad i over heat?


The coolant is working well, because the engine stays cool while driving. The problem is the fan relay, fuse, or the fan itself. Do you have AC? If so, turn it on and you should have instant running of the fan. The normal operation of the fan is: the engine thermal sensor tells the computer that it is getting hot which in turn tells the fan relay to turn on and that is supposed to turn on the fan itself. The fuse protects the high current wire to the fan. Try to turn the fan blades by hand--if stuck or very hard to turn, replace the fan motor. If you can't find the fan relay in the fuse compartment, it may be a solid-state device that is located near the fan motor. Chase the fan wiring back to the relay. Hope this helps!

Apr 30, 2010 | 1999 Jeep Grand Cherokee

2 Answers

Radiator Fan Stays On


A simple test would involve disconnecting the fan switch while the fan is on. If the fan then stops the switch has failed. If the fan continues to run remove the relay , if the fan then stops the relay has failed.
Various inputs/outputs at the relay should be confirmed to be 100% certain something strange isn't going on.
Above all be careful of the fan itself , if it's running obviously but if it's not it could start during repair

Mar 01, 2010 | 2001 Buick LeSabre

2 Answers

Why is my engin cooling fan staying on?


check and replace the engine cooling fan relay, refer to the owners manual for location under the hood.

Sep 27, 2009 | 2004 Mitsubishi Endeavor

2 Answers

I have a 1988 Honda Civic 1.6 ltr the radiator fans stay on as soon as you turn the ignition to on and stays on while the engine is running. I have change the fan relay and the sending unit under the...


You say you have change the fan relay and the 'sending unit'. Both of which are controlled by the thermostat. That's what yo need to change. It's the first step in the control.

Aug 25, 2009 | 1986 Lincoln Town Car

Not finding what you are looking for?
2006 Pontiac Torrent Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...