Question about Cars & Trucks

Open Question

Where is the kill switch for 2006 monte carlo and how to diable it

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
michigan man
  • 3533 Answers

SOURCE: 2006 monte carlo stuck in park

sometimes if the steering wheel is locked it won't come out of park try applying on the brakes and at the same time move the wheel back and forth and if this does not work and you have tilt it may be a problem in the steering column

Posted on Jan 21, 2009

Ad
  • 1 Answer

SOURCE: 2006 Monte Carlo

Here's how to override the shift lock on a 2006 Monte Carlo. First, remove the top of the shift console by pulling up on the plastic piece directly in front of the hinged cover. This is the piece that has the cup holders molded into it and it is held in place by 4 clips (i.e. it will pop back into place with no tools).

Next, shine a flashlight down into the console to the right of where the shift lever passes through (passenger's side). You'll see a wiring clip with 4 or 5 wires going into it. Directly behind this clip you can see a metal shaft with a flared top that looks like a button. This is the shift lock override button. Reach in behind the wiring clip with your right hand and press this button in. With the engine running, hold the button in with your right hand, press on the brake, and shift out of park with your left hand.

Now you can drive the car to your mechanic (or to your own garage) to find out why the shift lock solenoid is not working. On mine it was obvious. A wire going into that clip near the override button came loose and there was no power to the shift lock solenoid. I removed the clip, reattached the wire, and replaced the clip. Problem solved, fixed for free!

Posted on Feb 21, 2009

  • 141 Answers

SOURCE: serpentine belt diagram

should be in the owners manual if not under hood....new goodyear belts also have diagrams on the back of them....

Posted on Aug 09, 2009

  • 34 Answers

SOURCE: how do you remove the water pump on a 2006 monte

  1. Drain the cooling system. Refer to Draining and Filling Cooling System (LS4 Static Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9 Static Fill) Draining and Filling Cooling System (9C1, 9C3 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill).
  2. Loosen the water pump pulley bolts.
  3. Remove the drive belt.
  4. Remove the water pump pulley bolts and pulley.
  5. Remove the water pump bolts.
  6. Remove the water pump and gasket.
  7. Clean the water pump mating surfaces
    1. Position a NEW water pump gasket and the water pump to the engine front cover. Notice: Refer to Fastener Notice.
    2. Install the water pump bolts. Tighten the bolts to 10 Nm (89 inch lbs.) .
  1. Install the water pump pulley and bolts.
  2. Install the drive belt.
  3. Tighten the water pump pulley bolts. Tighten the bolts to 25 Nm (18 ft. lbs.) .
  4. Fill the cooling system. Refer to Draining and Filling Cooling System (LS4 Static Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9 Static Fill) Draining and Filling Cooling System (9C1, 9C3 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill).
  5. Inspect for leaks.
Hope this helps

Posted on Oct 01, 2009

  • 880 Answers

SOURCE: Where's the fuse panel in a 2006 monte carlo

The 2 main fuse boxes are on the ends of the dash, one on the drivers side and one on the passenger side, open the door and pull the plastic end pieces off the dash.

Posted on Jan 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car stuck in park


    Help! Shifter stuck in park - Monte Carlo Forum - Monte Carlo ...

    montecarloforum.com > ... > Engine/Transmission/Performance Adders
    Jul 20, 2010 - I'm new here and desperately need some help with my 2006 Monte. ... ofpark. Tried rocking car back and forth but it seems to be the switch or solenoid that stops car from going into gear without ... 1984 Chevrolet Monte Carlo. Trans Stuck in Park - Monte Carlo Forum - Monte Carlo Enthusiast ...
    Apr 28, 2013
    gear shift locked up - Monte Carlo Forum - Monte Carlo Enthusiast ...
    Aug 17, 2012
    Getting stuck in park - Monte Carlo Forum - Monte Carlo ...
    Dec 12, 2011
    HELP!!!! My KEY is STUCK IN IGNITION - Monte Carlo Forum
    Jun 20, 2011
    More results from montecarloforum.com

Dec 16, 2015 | 2006 Chevrolet Monte Carlo

1 Answer

06 monte carlo charging system


ck the alt. output should be around 13/14 volts

Jun 09, 2012 | 2006 Chevrolet Monte Carlo

1 Answer

How do i go about putting a 12 volt toggle switch (kill switch) in my 2003 monte carlo


2003 Monte Carlo comes equipped from the factory with an ignition switch and an antitheft system. Why do you want to install a "Kill Switch"?

Jan 23, 2011 | 2003 Chevrolet Monte Carlo

1 Answer

1996 monte carlo dash lights and tailights are not working, but brake and headlights are? Checked all fuses, even replaced the switch. Now what??? HELP...


did you check the tailight bulbs?
I heard a rumour that if your tail lights go out it will diable your dash lights has a warning to driver.
let me know..

Jul 27, 2009 | 1996 Chevrolet Monte Carlo

1 Answer

2006 monti carlo blower motor stuck on high, even


what blower you talking about.if ac blower your blower relay stuck close. your monte carlo has a super charger blower also.

Jul 05, 2009 | 2006 Chevrolet Monte Carlo

1 Answer

Is it the kill switch?


The kill switch would not stop the key from tirning you may nee to try your backup keys or replace the ignitin cylinder..........

Jun 27, 2009 | 1995 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...