Question about Chevrolet 2500

Open Question

How to replace a tail light control switch - 2500 Chevrolet Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2007 Ford Fairmont Ghia Sedan. Rear brake lights and indicators work but not the tail light.


tail lights work off the main light switch or through the light control module
the first click is tail and park lights , the second click is main beams or low beams

May 08, 2016 | Ford Cars & Trucks

3 Answers

If the break lights in my 1986 c corvette works but the tail lights do not, what could be the cause


Blown fuse ,bad headlight switch,or wiring issue.
the tail lights have there own fuse and are powered through headlight switch. Do the front running lights come on? If none of them work, switch could be bad if front work and rears dont, check bulbs and power to them when lights are on

Mar 17, 2015 | Cars & Trucks

3 Answers

Why the brake light works and tail light don't work Chevrolet avalanche 2003


they are dual filament bulbs so the tail light filament might have blown and not the stop light , replace the bulb to check

Jul 18, 2014 | 2003 Chevrolet Avalanche

1 Answer

Both tail lights don't work turn signal and back up lights work but no stop light and no tail lights


could be a glitch in the front power controll modual disconect the battery wait couple minuts reconect and see if thay come back
also replace the bulbs even the one on the cab your therd brake light alot of ppl dont relise its out and it will help determin if its in the tail lights or its in the brake switch if the therd brake light lights and the tails dont replcae the switch after inspecting the tail light conectores for corotion

Mar 11, 2014 | 2005 Dodge Ram

1 Answer

I have a 2001 potiac grand prix with no tail lights the same bulb work turn signal an brake lights they r fine ive checked all fuses and replaced all bulbs even replaced the light switch still no tail


no, they are not the same. The multifunction switch is on the steering column and controls wipers, turn signals, and hi/low beam headlights. Dash switch is on the dash and generally turns lights on and off and frequently also controls brightness of dash lights. I had a Camry that had the same thing happening...ended up having a toggle switch put in to control the tail lights...fixed the issue.

Sep 04, 2012 | 2001 Pontiac Grand Prix

1 Answer

No tail lights when the headlights are on


Check the fuse for the tails. If it's good, then possibly a shorted out light switch, or a problem in the body control module (BCM).
I replaced a light switch recently, without disconnecting the battery. When done, the headlights were fine, but no tail lights. Turns out I blew the tail light fuse by not disconnecting the battery before starting.
Good luck.

Mar 23, 2012 | 1999 Plymouth Grand Voyager

1 Answer

Dash lights went out


First check to make sure you do not have the dash light dimmer control turned all the way down.

If that is not the problem, check to see if you have any tail lights. If the tail lights are also not working, check the tail light fuse. If you find that the fuse is blown, you need to find out WHY. Something has overloaded the circuit and caused it to blow. Replacing the fuse without correcting the circuit fault that caused it to blow will only result in another fuse blowing.

If you do not have the dimmer control turned down and the tail lights are working, then you probably have a bad headlamp switch (the dimmer control is built-in to the headlamp switch and can only be fixed by replacing the whole unit.)

Jan 05, 2012 | 1994 Chevrolet Lumina

1 Answer

I have an 1986 camaro iroc. i have brake lights and turn signals but no tail lights or dash lights, i have power to the tail light replaced both bulbs. i cant seem to find the fuse . does anyone know where...


Bulbs work just like a fuse. When old they just short out like a weak fuse bowing out. Since the lights do not have a fuse you need to replace the headlamp switch for this switch controls the tail lamps. The directionals are controlled by the directional switch, and the brakes are controlled by a brake light switch. Those have fuses for they have switches. Headlight switches do not have a fuse

Apr 15, 2010 | 1986 Chevrolet Camaro

1 Answer

1986 Toyota Pickup Instrument lights and tail lights out


Even though the relay is activated,I assumed you checked the out put?Also,You checked the voltage at the light sockets?With a meter,or test light ,check the fuse for the cluster lps,adjust them to dim,and to bright,the meter should act accordingly on the fuse.If it does not,replace the dimmer control,or head light switch,witch ever controls them.This may allow continuity to the tail lights as well.If the fuse is dead for the cluster lights,replacing the dimmer control,or head light switch will solve the problem,or,from another fuse ,supply voltage to the cluster lp fuse,one that is only hot with the key on,cause if you do this the dash lights will come on,every time you run the vehicle,day,or night.

Dec 20, 2009 | 1986 Toyota Pickup 4WD

1 Answer

Tail lights will not turn off, the switch tests good.


bE SURE IT IS NOT BRAKE LIGHTS AS THEY CAN BE MISTAKEN, BRAKE LIGHT SWITCH FAIL AT TIMES THIS WAY AND REQUIRE REPLACEMENT

Aug 18, 2009 | 1998 Hyundai Tiburon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...