Question about 2006 Honda Element

Open Question

No rear brake lights when you apply brakes - 2006 Honda Element

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1596 Answers

SOURCE: no lights in rear

I would Get in the Back pull up anything covering the Wiring harness for those lights and Look for A Corroded Connecter AND the GROUNDS on all thats why urn comes on while you Brake Electricity Finds the Easyest PATH to GROUND AND IF IT IS THROUGH THE Turn Sygnal switch GROUND is your FIRST PRIORITY here Trust me I'm ASE Certified in Electrical Systems
Grounds FIRST Please Dont forget to RATE me Thank You !

Posted on Jan 20, 2009

  • 1 Answer

SOURCE: Brake lights do not light up when the brake is applied.

could it be the brake light switch at top of pedal

Posted on Apr 13, 2009

  • 75 Answers

SOURCE: Rear brake lights do not work.

The brake light that is on the dash is for the emergency brake...When that light is on that is supposed to tell you that the emergency brake is applied if the brake is not applied then you need to service the emergency brake. And on the brake pedal there is a coupler that is hooked up to the pedal bracket that wire may be soft set try gently snapping it into place.

Posted on May 19, 2009

  • 1 Answer

SOURCE: Brake lights not working

Having the sa but haven't replaces the brake switch. The owner's manual for my 99 accord indicates the the fuse is located behind a panel that is viewable when you open the door on the driver's side. There is a panel that you remove (pull off) to expose the fuses. The brake light fuse is the third one from the top on the left. 7.5 A

Posted on Jun 16, 2009

  • 118 Answers

SOURCE: 2000 honda brake lightts

check the fuses
than the relay's its one of these

Posted on Sep 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuses keep burning out; rear lights don't come on when brakes are applied. Is there a connection between these two problems?


There is a problem with your question
from what you say the brake lights do not come on when the brakes are applied --that would most likely be a faulty brake light switch
The fuse blows when the hand brake is applied indicates a short after the hand brake switch before the brake indicator in the dash that lets you know the hand brake is applied
you say that the rear light come on when the light switch is turned on--does the fuse blow then , when the brakes are applied or only when the hand brake is applied
a clearer question with a lot of detail ( make , model year , engine size etc)will get a closer answer

Dec 17, 2015 | Cars & Trucks

1 Answer

Third eye works no rear signal or brake lights


The high mount brake light gets its own signal from the brake light switch (on the brake pedal). Or at least the wire leaving the brake light switch will splice, one wire to the high mount brake light, and the other for the rear brake lights is routed through the turn signal switch, and coordinated there with the turn signal wires to the rear brake lights. The brake wires and turn signal wires share the same wire, and same filament in the bulbs. It is kind of complicated, but brakes applied with no turn signal, brake light wire goes from brake light switch through the turn switch and out to the bulbs. If brakes applied with turning signal, non blinking brake light wire goes from turn switch to rear light, while the turning signal wire will go through the flasher relay, and then to the rear light to cause blinking.

I hope that makes sense. It appears the problem may be in the turn signal switch for both the turn signals and the rear brake lights.

Mar 14, 2015 | 2007 Dodge Ram 3500 Quad Cab Laramie

1 Answer

Brake light won't come on


the third light works off the light cluster main wire at the rear so if there is power to the this light then there is a problem with the cluster link. check with a meter at the connector with the brake applied if power. then clean the plug to the cluster.

Mar 12, 2014 | Hyundai Cars & Trucks

1 Answer

Seems to be missing reverse and wont take off in 1st.


apply brake many time make sure the lights indicator is off when you apply. check brake light S.w
check rear brake light working while you apply brake .if manual gear box replace presure plate and clutch

Jul 04, 2011 | 1985 Volkswagen Cabriolet

1 Answer

When car is turned on all rear barke lights and signals work but when car is off and brake is applied only the spoiler brake light comes on is that supposed to happen like that /


The rear spoiler and both rear lights should come on with the car off and brake applied, but no other lights should,The Only lights that should work on any vehicle when it's turned off is The headlights,brake lights,and hazzard light..

Oct 01, 2010 | Chevrolet Cobalt Cars & Trucks

1 Answer

Sharp squeaking from rt rear wheel. Might be a bearing but it stops if i apply light brake pressure


your rear brakes need servicing!!Those sqeaking noises are from metal pins within the brake pads. They touch the rotor surface when the pads are worn. Usually when brakes are applied they tend to silence the squeal. Inspect the rear brakes for pad thickness. Hopefully this helpd!!

Aug 14, 2010 | 2004 Toyota RAV4

1 Answer

Brakes applied, brake light turns on but other running lights off


The brake switch under your brake pedal may be defective. It turns on the brake lights when brakes are applied, if it is defective within the switch, it may short your other lights when brakes are applied. The switch can be replaced by you and it not expensive.

Jan 07, 2010 | 1996 Mitsubishi Mirage

1 Answer

Brake lights wnt wrk when pushing dwn brake, but park lights do


As cadman mention to check the fuse, and if there ok check your brake light switch along the brake peddle arm. Before you doany of that, turn your hazard light on to make sure that all your light's are not burnt out. Good luck

Apr 08, 2009 | 2004 Kia Rio

2 Answers

When brake is applied,the rear light on the panel come on.


You might wanna have your rear brakes checked along with the rear brake calipers or cylinders, as well as the rear drums or discs, depending on weather your car has rear drum brakes or rear discs brakes. Some cars come equipped with brake sensors that let you know when theres a problem. It would also be a good idea to check you brake fluid level.

Mar 12, 2009 | 1990 Toyota Camry

2 Answers

Rear brakes wont apply consistantly


1- brake system low on fluid,
2- improperly bled (air in lines).
3- Master cylinder (applies equal pressure to all 4 cylinders) is bad.

Jan 08, 2009 | 1992 Chevrolet S-10

Not finding what you are looking for?
2006 Honda Element Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...