Question about 2000 Ford Expedition

1 Answer

My 2000 ford expedition stalls when i get up to speed... I have changed all spark plugs and changed a coil that the auto parts store said to on number 7 and i still have the same problem with the stalling and running rough when i give it gas

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 166 Answers

This can only be a guess since I don't have the mileage. Around a 100k on the odometer and fuel filter never changed..
No filter then the screen on the fuel pump inside the tank.

Posted on Feb 14, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Sparkplug ignition coils

not a coil problem. clean/replace your mass airflow sensor.. if YOU can.

Posted on Sep 14, 2008

keeperoffire
  • 106 Answers

SOURCE: 2000 Ford Expedition EB runs rough and begins to shake and stall

I personally would start with the one that runs cylinder #3 and then take it from there.

Posted on Mar 09, 2009

GARYca
  • 672 Answers

SOURCE: My 2003 expedition is idleing and running rough

Its recommended to replace all coils at the same time you replace the plugs. I had the same problem @62000miles, changed the same part, including injectors at the ford dealer. It just got worst, I replaced all the coils and engine ran like new.

Posted on Aug 13, 2009

  • 784 Answers

SOURCE: 97 Ford Contour GL 2.5 L V6. Stalling out. Auto

They are not only for improving milleage, but play a crusual key for ECM to give out how much fuel to mix with air to have proper combustion hence not stalling when accelerated. But Oxygen sensors are expensive and even you have them replaced , this is not going to solve your problem since gum has built up at your throttle valve over the years. Have another shop to clean your throttle body first. Make an appointment so you can be there to see how dirty the throttle body is and also to make sure they actually take out the part to clean, not just spraying cleaner to the Air mass flow flap valve. After the throttle body cleaned, take off the battery cables for 30 minutes to reset the ECM to its default state so it doesn't use data from your current state. You will see an improvement. Afterward, the problem is still existing then Have Auto Zone store diagnose free for O2 problem before replacing them. Cheers.

Posted on Oct 02, 2009

emissionwiz
  • 75051 Answers

SOURCE: 85 Ford f150 4.9l 4wd truck combustion running bad

the problem is caused by a leaking intake manifold and the carb in many cases being loose at the base, grab the carburetor and wiggle it, check these two items and let me know

Posted on Oct 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electrical Problems


Your best bet is making an appointment with a mechanic. There could be any number of possibilities that might be causing all this.

Apr 22, 2012 | 2000 Ford Expedition

1 Answer

I have a 2000 Ford Expedition 5.4 V8 Triton and I'm replacing the spark plugs and the #3 coil pack... Can someone please tell me what brand coil to buy?


I have had really good. Luck with the NAPA brand. Otherwise the ford dealer is fairly competitive as well. Make sure you are using motorcraft or auto light spark plugs. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 08, 2012 | 2000 Ford Expedition

1 Answer

Misfire on cylinder # 5


5.4 Liter? If so you should have a coil on plug ignition. Pull the number 5 coil and check for spark. If there is no spark swap it with number 1. If there us still no spark than replace the coil.

Jan 15, 2012 | 2000 Ford Expedition

1 Answer

Third spark plug misfiring need to know where its located and how to fix problem


change plugs one at a time or call auto parts store for fireing order of vehicle the number three plug will be what the fireing order is also could be a wire

Dec 05, 2010 | 1997 Ford Expedition

1 Answer

I have a 2001 Ford Expedition 4.6 4WD. Service engine soon light came on and when checked at parts store diagnostics said cylonder #2 miss firing. Is this a coil pack because we can't find plugs,...


If you do not see a distributor or spark plug wires, then you have a coil over plug system. Changing the coil pack is as easy as removing the hold down bolt and lifting the coil pack off the spark plug. Other things should be checked like signal to the coil, the fuel injector signal and the spark plug

Sep 05, 2010 | 2001 Ford Expedition

1 Answer

What has to be taken off to change all 8 coils on 2000 ford expedition


actually nothing. what ford has are called "cips" coil in plug. i just changed my spark plugs out. the spark plug is covered by the "cip". the back 2 near the firewall on both side are a royal pain. forgot to say that each cip is held into place by one bolt (i think its a 10mm bolt). this job will take about 4-6 hours. a faster technique is to unbolt fuel rail and gently pry up the injectors this willl give you more work space. i am willing to bet your plugs are bad and not the "cips". if you are going to change the cip then do the plugs also. the cips run for about 60 to 80 bucks a pop.

Feb 07, 2010 | 2000 Ford Expedition

2 Answers

HOW TO CHANGE COIL PACK ON 2000 FORD EXPEDITION EB 5.4 ENGINE?


Ther is no coil "PACK" on your engine. Each plug has its own coil. Each one is held in place by a single 8mm head bolt that screws into the intake plenum. To change them you simply disconnect the electrical connector, remove the bolt and pull the coil and spark plug boot up out of the spark plug tube. (Reverse proceedure to install.)

Nov 19, 2009 | 2000 Ford Expedition

1 Answer

Is it hard to change the spark plugs in my 2000 expedition triton v8


5.4 triton, spark plugs are under valve cover have to disconnect harnesses and make room to remove cover pull bolts from cover, unbolt coil from each plug change plug reinstall coil, then change valve cover seal and rebolt down, reconnect harneses and then u realize u have other side to do still... yes one of hardest plugs to change in any vehicle

Jul 06, 2009 | 2000 Ford Expedition

3 Answers

Misses during acceleration , rough acceleration, service engine soon light on, power loss, still runs fair, 2000 ford expedition


Go get the codes ran at auto zone or advance auto parts they will do it for free. If the codes come up as a cylinder miss-fire then it is most likely a coil (being a ford). Write down which cylinder it is. I wouldn't replace any of the spark plugs , useless you have more than 100,000 miles. If you have to replace the spark plugs use BOSH double plautim or better. The cylinder placing is ( as your are looking at the front of the truck) passenger side front to back 1-2-3-4 driving side front to back 5-6-7-8. If you never seen a coil buy one so you know what you are looking for. The coil is held in by a 7mm bolt. Take the bolt out and replace the coil. Problem Solved. Estimated time 20 Mins with 60 dollars per coil.

Mar 10, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...