Question about Cars & Trucks

Open Question

How to replace coil pack CROWN VIC - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 261 Answers

SOURCE: Ford Crown Vic p0300 random cylinder misfire

take a look at the EGR valve it could be either vacum controlled or electronic either way what seems to be the problem is that the valve is stuck in the open position until the engine warms up you can gently tap the egr valve with a small hammer or a screw driver and you can see that it runs smooth, now if the egr valve is vacum controlled replace the valve. if it is electronoc controlled replace the valve and the module for the egr valve.

Posted on Nov 24, 2008

  • 196 Answers

SOURCE: bad coil pack on crown vic

well if you have checked the spark plugs and they look good then its probly the coil If the plugs have never been replaced i would start with a tune up and see if this fixes the problem. If not there is no good way for you to test it you would need a computer to hook up to the car

Posted on Jan 24, 2009

  • 5470 Answers

SOURCE: Wiper motor replacement for a 99 crown vic

I replaced the same part on a 1994 Crown Vic. There are a few bolts which go through rubber mounts on the firewall and that is how the wiper motor fits against the firewall. There is a clip on the wiper drive that must be pressed and slid off the wiper shaft. The hardest part was getting clearence between the engine and wiper motor. If I remember there was a way to turn the wiper case to clear the engine. I have asked myself why this was engineered like this? There is nothing important in the way that 3/4" of clearance could have been given for removal.

Posted on May 06, 2009

  • 3600 Answers

SOURCE: 1998 crown vic police. Had check engine light with

your egr on that side is dirty try cleaning it aslo check intake boltsaround those clyinders.

Posted on Jun 21, 2009

  • 33 Answers

SOURCE: Replace horn on 2006 crown vic

I believe once you have mounted the horn and connected the wire you will find that the horn wire was cut at (by) the steering coloum that the siren override was hooked to,you will have reconnect this,I hope this helps you

Posted on Jul 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1996 Crown Vic. recently started to buck and backfire a bit, turned out to be a misfire on #4, have been looking into it with a bit of progress but not complete success


I have faced the same thing with my car, this is not a single answer to this problem. It could be a bad boot on the coil pack, it could be a improper coil install, sometimes the spring does not sit in well, it could be that the intake manifold is leaking, it could be that the egr valve is stuck, it could the exhaust manifold is leaking, sometimes these issues are not caught by the OBD 2 sensors, you can try to move the coils around to see if that works out.

Mar 17, 2014 | 1995 Ford Crown Victoria

2 Answers

I have a 1996 crown vic i need to know these trouble codes po301 po304


PO300 Codes-- are cylinder misfires

PO301 thru PO308

Last # is the cylinder

Could be bad ignition coil for a cylinder
or a coil pack for that side,depending what
engine you have

#1 &#4 are at the front & back of the passenger
side of your motor or firewall side if transverse

You will need to provide details of who worked on it
& exactly what was done besides replace a coil based
on a code

Codes aren't very good with COP Ignition but a complete
coil pack on one side should take care of some issue

Vacuum Leaks & other items can cause misfires & the codes
don't tell you to replace ignition parts as you may have

Feb 14, 2013 | 1996 Ford Crown Victoria

1 Answer

Trying to locate spark plugs on 99 crown vic police interceptor engine


They should be mounted down in the cylinder heads, you'll need to remove each coil pack. A long extension and 5/8in spark plug socket and an extendable magnet will help. Also, you may need to remove the fuel rail to get to move the coil packs.

Oct 17, 2010 | 2000 Ford Crown Victoria

1 Answer

2001 crown vic has a misfire on #5


does it have coil packs for each cylinder,have you tuned it up lately

Jul 11, 2010 | 1995 Ford Crown Victoria

1 Answer

1999 ford crown vic with ignition coils going bad a lot.


have look at ur wires that is caming from the car in to the coil it self

Mar 10, 2010 | 1999 Ford Crown Victoria

1 Answer

Changed coil pack wont start on  99 crown vic


Check the ignition module,and the crankshaft sensor.

Feb 06, 2010 | 1999 Ford Crown Victoria

1 Answer

Bad coil pack on crown vic


well if you have checked the spark plugs and they look good then its probly the coil If the plugs have never been replaced i would start with a tune up and see if this fixes the problem. If not there is no good way for you to test it you would need a computer to hook up to the car

Jan 24, 2009 | 2001 Ford Crown Victoria

2 Answers

Ford Crown Vic p0300 random cylinder misfire


take a look at the EGR valve it could be either vacum controlled or electronic either way what seems to be the problem is that the valve is stuck in the open position until the engine warms up you can gently tap the egr valve with a small hammer or a screw driver and you can see that it runs smooth, now if the egr valve is vacum controlled replace the valve. if it is electronoc controlled replace the valve and the module for the egr valve.

Nov 02, 2008 | 2000 Ford Crown Victoria

2 Answers

Engine light po 300 code


IS THIS A 99 CROWN VIC? IF SO IS IT MISFIRING? IF THIS IS THE CASE YOU MORE THAN LICKLY NEED PLUG WIRES.

Sep 06, 2008 | 1999 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...