Electrical problem 2000 Chevy S-10 4 cyl Automatic
just installed new starter
on 2000 chevy s-10 3 days later altenator not working right just 12v have to keep on charge. now there is no power nothing works no lights no nothing just like there is no battery. when i go to put on charge the hand pegs out on the charger and shuts down .. someone said i may have a short . what are some things i can do to check for a short and are there any related problems with this vechicle . all fuses ok .. tried battery again and the positive cable got real hot . thank you if you can help
Comments:
Jun 09, 2009
- i have taken the starter back off and .tried to reconnect battery .and still nothing with the starter not even on the truck . the positive side gets real hot and sparks, thank you
Cam shaft timing 2000 chevy S-10 4.3 (w) what should it be +3 -3 degrees? I know the computer sets...
(More)
Cam shaft timing 2000 chevy S-10 4.3 (w) what should it be +3 -3 degrees? I know the computer sets the timing, but you can still move the distributor. I've have it set +3 degrees.,checked with a scanner.
ive tried to replace the o-rings on leaky injector didnt work twice. Replaced two injectors and...
(More)
ive tried to replace the o-rings on leaky injector didnt work twice. Replaced two injectors and fuel gushed out. What am I doin wrong? 95' s10 5 spd
Hi I have a 2000 chevy s10 pickup and I have a problem with my 4wd. I tried to kick it in last night...
(More)
Hi I have a 2000 chevy s10 pickup and I have a problem with my 4wd. I tried to kick it in last night when it was snowing and all the 4Hi will do is blink then go back to 2wd. I tried it again this morning and now both 4Hi and 4Lo blink at the same time then nothing lit up. After trying again I can get it into 4Lo and 4Hi but it seems like 4Lo is the only one doing anything and both lights still blink when I'm pressing them. Is there anything I can do myself to fix this? Thanks for the help