- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did you get the question i sent you about the engine size?, i will do this, here are nthe diagrams. The engine component wiring is diffrent due to the fact that two type engines come in this car, i have sent you the wiring diagram for the 2.5 engine, the wiring for the fuelpump is wired the same as the 3.0 engine but if you need to check other components and you have the 3.0 engine then let me know and i will send the wiring for the 3.0. locate the fuelpump on the page and then you can follow the wiring to the computer and other locations, hope this is helpful please let me know that you have received this . good day.
BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
Halo & L.E.D.
Bottom of the Headlight:
Ballast Bracket, Halo Wires(red/black)
Turn Signal Adaptor
10mm - 8mm socket
For more information about how to install your vehicle, come visit our youtube page on
Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
Factory Xenon Headlight
Spyder Projector Headlight using Factory Xenon Lights
pls vote an diam giving you link also for better help BMW e46 HID Headlight Replace
Did it work before? Are you aware that the pump in the trunk has a off and on switch, that could have been moved? Plus there are hydraulic arms that raise the top on each side of the car (Cylinder looking things those could be broken also? No wiring diagram sorry.