Question about 1998 Kia Sportage

Open Question

Peugeot tour van 1997 immobiliser contact key not contacting to dashboard contact switch

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i fix immobiliser on a 02 peugeot 206cc

There is a chip in the key fob, might need reprogramming by Peugeot! Try your spare key.

Aug 29, 2015 | Peugeot Cars & Trucks

1 Answer

Will not start

Most likely something not correct with new switch.

Nov 23, 2017 | Renault Cars & Trucks

1 Answer

Peugeot 306 52 plate,pulled out the garrage one morning all perfect,left for 30mins tried to start to go to work turns over but wouldn't start,tried everything even diognostic machine of mine and the

Did you check for fuel pressure with a gauge on motor
or scan tool, if that data is avail?
Did you put one of those HEI Spark Plug testers in a plug wire
or cop coil
Do the cams turn
I'm not into the Peugeot, but is expect you may have a timing
belt ?
You may not have data on the ignition switch & its contacts
Do you have battery voltage to the ignition & injectors with key on
Injector pulse when cranking ( crank sensor !!)

Jul 26, 2013 | Cars & Trucks

1 Answer

I have a peugeot partner van 1997, and I want to bye pass the immobiliser, as the van will not start. The red and green light are staying on. do you have any suggestions please? It is with a mecahnical...

Leave it for half an hour with the ignition on and door closed, it should re set (this happens when the wrong code is used for more than 3 times) check for a sticking button, sometimes they go sticky with a lot of use, if you do get the green light just umplug the keyboard when running and it disables the system. If you cannot get the green light try leaving the battery off overnight with the lights switched on then connect the battery, if still no with the ignition on and someone in the car spark the earth lead to the battery untill the green light comes on.

Apr 13, 2010 | 1991 Peugeot 405

1 Answer

My turn signals quit working suddenly on my 1997 Dodge Ram Van,the flashers work fine.

You might check to see if you find two separate flasher units under your dashboard. If not, the relay that connects the L-R sides together could have fused contacts.

Mar 24, 2010 | 1997 Dodge Ram 2500 Club Cab

2 Answers

Peugeot 406 hdi electronic immobiliser warning

The ignition key may be defective or in need of a battery to generate the code needed to disarm the immobilizer. Hope this helps!

Mar 05, 2010 | 2005 Peugeot 405

1 Answer

A key sign or K flashes on dashboard.

its an immobiliser fault ,dealer only so be prepared to lay the golden egg

Nov 17, 2008 | 1991 Peugeot 405

1 Answer

Ford Courier Van imobiliser stuck on

hi not as simple as that have you checked all the fuses and corresponding relays and wiring connectors there is a web site that gives you the wiring diagrams for the security systems if you are ok with wiring diagrams then you will either be able to by-pass or or put a remote start switch in but as i said it is not a five miniute job if you want i can send you the sites details yates210456

Oct 05, 2008 | 2000 Ford Escort

Not finding what you are looking for?
1998 Kia Sportage Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

79186 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides