Question about 1999 Mercedes-Benz E-Class

Open Question

Mercedes a170 cdi stalling while driving - 1999 Mercedes-Benz E-Class

Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 22326 Answers

SOURCE: what is the meaning of -6 screen message a170 cdi

outside air temperature ,look in manual

Posted on Jan 26, 2010

  • 166 Answers

SOURCE: i have mercedes benz E220 cdi avantgrade,i havent been driving my car about one week.this morning when i start engine cardidnt start, on dash board tis apeared ,ESP not avallabel see owners

The ESP message came on because the battery went low causing your steering angle sensor to lose syncronization. There are 2 different ways to resync the steering angle sensor. One way is turning the steering wheel from lock to lock and the 2nd way generally involves just driving the car around like normal and it will resync on its own. You will most likely just have to drive the car around until it resyncs on its own because of warning message your getting. When it says see owners its because in the owners manual there is a description on what the message means and what to do to fix it. Basically it just tells you to drive the car. Hope this helped you out.

Posted on Feb 23, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is causing my engine to stall at stop light?

Could be a number of things. Start with doing a fuel system clean and air filter swap. If that doesn't fix it. Look into crankshaft position sensor and the knock sensor.

Aug 05, 2014 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

I have problems with my the Mercedes A170 CDI 2001 (W168) automatic transmission. There is high pressure in the cooling system (hoses are hard) when started the engine and coolant level fluctuates up and...

To have high pressure in the coolant system you have compression pressure escape into the coolant system. If you simply replaced the head gaskets without checking for cracks or having the head machined to eliminate warped head then you have pretty much wasted your money as the problem still exists. You will have to pull the head again and have it checked out. Put a coolant system pressure tester in place of the radiator cap and start the engine and see if there is a rise in pressure on the gauge.

Nov 28, 2013 | Mercedes-Benz Fujimi Mercedes Benz W168...

1 Answer

Red oil light comes on mercedes a170 cdi, engine starts to cut out, what do I need to do?

Check your oil levels. If full, then confirm pressure with an external oil pressure gauge attached to the motor.

You may need to tow it to a Repair shop to keep from ruining the motor. When stuff like this happens, it can be a defective oil pressure switch. But it can be a bad oil pump or bad bearings.

Sometimes an oil sample needs to be done or just change the oil. If gas mixed with oil, then the oil is too thin to pump good. And it is time to find out why gas is in the oil.

I hope my solution is helpful and that you will rate me.

Oct 07, 2012 | Cars & Trucks

1 Answer

2003 Mercedes-benz Sprinter cdi 316 cuts out and doesn't start

Hi, My thoughts exactly ( fuel leak). Is this a deisel or gas engine?
In both cases be very careful with lights or cigarettes.
You can smell it when you get out of car in a garage or stall.
Good luck.

Apr 05, 2012 | Mercedes-Benz Sprinter Cars & Trucks

2 Answers

Year of manifactured for the Mercedes Benz E220 CDI, Chassis

Must be a rather new car because the e220 cdi is listed as a first drive on the 2010 copyrighted site that I saw:

Jul 08, 2010 | Mercedes-Benz E-Class Cars & Trucks

3 Answers

E 270 CDI. ESP and ABS warnings.

i own m b 270 class e.i start ,i go for about 100 or 150 mets then my car lose the power.i remove the key & restart ,again the same problem,if some on can help me

Mar 13, 2010 | 2001 Mercedes-Benz E-Class

1 Answer

Brake caliper bolt torque settings for merc a170 cdi im cleaning the calipers and replacing pads, on rear brakes, would like to know the torque settings for the bolts

A quick phonecall to the service department of your local dealer should confirm what they should be. Alternativlely you could check the current tightness of the bolts on the caliper you haven't disturbed yet. I'd estimate around 60nm should be correct.

Nov 06, 2009 | 2002 Mercedes-Benz C-Class

1 Answer

I need a fuse box diagram for a Mercedes A-140, because I need to know which fuse is which.

Hi I have a Mercedes A170 D the engine light as come on and it starts some it just stop .

Oct 11, 2009 | 2006 Mercedes-Benz B-Class

1 Answer

Mercedes e220 cdi auto engine shakes when car is changing gear

Hi have a mercdes e220 cdi auto 2004 having gearbox problems: Taking reverse ok and Drive but only 1st and 2nd gear and not taking manual box any suggestions what might be wrong?

Mar 25, 2009 | 2005 Mercedes-Benz E-Class

Not finding what you are looking for?
1999 Mercedes-Benz E-Class Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

79851 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides