Question about 2006 Skoda Octavia 1.6

Open Question

On board computer not working properly - 2006 Skoda Octavia 1.6

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

2000 Buick Lesabre rpm and gas gauge not working properly

Probably corrosion in connections from sensors to the dash circuit board. Could be components in the dash circuit board.

Mar 06, 2015 | 2000 Buick LeSabre


Why is my car's CHECK ENGINE LAMP on?

Most vehicals manufactured after 1980 have some type of Check Engine Lamp. The lamp is a telltail signal initiated by the On Board Computer. The Computer recieves input signals from various sensors in the Fuel Management System. These inputs allow the On Board Computer to adjust it's Outputs to coinside with variables which may or not be within it's control. When the On Board Computer detects an input or output which contridicts normal known values, it turns on the Check Engine Lamp. The On Board Computer also sets (records) a fault code in it's memory, which should lead the repair technician to the proper area for diagnosis. Most vehicals with require a scan type tool to access the fault code. After the code is aquired diagnosis can begin.

on Sep 09, 2010 | Chevrolet 1500 Cars & Trucks

1 Answer

Is there a test for the on board computer to see if it is working properly

If the truck starts and runs the ECM is working. All the engine's electrical components communicate with the computer in some way.Either by inputting signals or receiving signals. When there is a problem with these signals,the ECM turns on the MIL(malfunction indicator light).

Feb 23, 2015 | Dodge Dakota Cars & Trucks

1 Answer

My idle is too low when engine is to adjust

the idle is not adjustable, it is controlled by the on-board computer system, by a idle control motor or valve whichever you want to call it. suspect that the idle control unit is bad or the throttle body has allot of carbon build up that is not allowing the unit to work properly.

Mar 12, 2011 | 2003 Toyota RAV4

1 Answer

The computer keep showing faults and the dealership cannot diagnose any problems. The I-drive screen shorts out taking all of the computer functions with it. Once restarted the I-Drive returns and...

wet ecu board?.....remove the ecu and inspect the circuit board for water/grunge build up acrosss solder points. sounds like the ecu is corroding.... they really should be properly sealed....

Jan 19, 2010 | 2006 BMW 550I

1 Answer

Location of on board computer

Under the seat on the passenger side. You'll need a manual to find how to get into the proper mode and then interpret the codes, which are series of flashing lights.

Apr 20, 2009 | Nissan Pickup Cars & Trucks

1 Answer

On my mesage board it is asying a/c compressor off and very low on a/c has not been working all winter but heater has been working.

sounds like there might possibly be a refrigerant leak which would need to be detected, repaired, and recharged, Then clear codes from computer. Your heater will still operate although it wont be DEHUMIDIFIER air as when it is working properly nor will the system stay on AUTO. Will stay on ECON

Apr 07, 2009 | 1996 Cadillac DeVille

Not finding what you are looking for?
2006 Skoda Octavia 1.6 Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Skoda Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Brad Brown

Level 3 Expert

15478 Answers

Frank Magliocca

Level 3 Expert

1042 Answers

Are you a Skoda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides