Question about Toyota Cars & Trucks

1 Answer

Toyota dyna ignition key

I bought a replacement ignition switch for my Dyna Truck, but it now won't start at all - it just makes a clicking noise. I thought maybe the replacement was faulty so got another but still not going. is there a "trick"I should know. thanks Dale

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 366 Answers

Clicking noise usually means a flat battery (solenoid clicking)

Posted on Feb 14, 2014

  • Dale Barr
    Dale Barr Feb 14, 2014

    Hi - when i put the original ignition switch back in it started fine so it is not a problem with the battery or the starter motor.

  • vtec Feb 15, 2014

    sounds like the replacement switches are not the correct ones for your model

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Clicking Noise when trying to start vehicle

check your key remote if it is not programmed the alarm will go into the kill switch mode and will not allow you to start your engine Having the same trouble with one of my keys I haven't found a way to reprogram it without calling dealer and paying a chunk.

Posted on Aug 04, 2008

  • 4 Answers

SOURCE: 1997 toyota tacoma ignition clicking

what engine size and transmission, automatic or stick shift do you have in this truck?

Posted on Sep 01, 2008

  • 599 Answers

SOURCE: 1985 Toyota pickup (22R) won't start just hear a

turn on the head lights and while someone watches the head lights try to start the car, do the headlights dim or go off get back to me and we'll go from there

Posted on Apr 24, 2009

motor1258
  • 6674 Answers

SOURCE: release excellorator makes clicking noise turn

Sounds like your thinking in the right area. Up on stands or hoist look for ripped boot, and/or movement at joint.

Posted on Jul 08, 2009

  • 31 Answers

SOURCE: 94 dodge intrepid wont start

clicking in the fusebox? And the starter could be because you need a new one. or a rebuilt. The clicking is your starter cylinoid.

Posted on Aug 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

'85 toyota pickup won't start


Hi with an old vehicle like yours, first thing which comes to my mind is the ignition switch and or a loose ground some where close to the battery.

Jan 08, 2013 | Cars & Trucks

1 Answer

2001 Lexus GS300 won't start (makes a continuous


A mechanic would check for voltage at the battery, the starter, the neutral safety switch, and the key switch.

Aug 04, 2012 | Cars & Trucks

1 Answer

ITurn key, clicking sound, no turn over


If it won't crank over, it's a problem in the starting circuit, not the ignition circuit. Check your battery and starter for clean, tight connections. Listen for that click to see if it comes from the starter solenoid on the starter-maybe have someone try to start it while you watch and listen under the hood. If the click is from the solenoid (and not from the starter relay), then the starter is not getting full battery power to crank (bad connection), or the starter needs to come off and be tested.
If the click is from the starter relay, you could pull off the little purple wire to the starter solenoid and see if it has 12 volts when the key is in start position. If you have power there in cranking position on the switch, the solenoid is bad or the starter may be the problem-again, it will have to come off for testing. If you have no power at the solenoid in cranking position, the circuit from the ignition switch to the solenoid is not working. The start relay and the neutral safety switch (or clutch switch if manual transmission) are in the starting circuit from ignition switch to the starter solenoid. Good luck.

Apr 01, 2012 | GMC Cars & Trucks

1 Answer

My lights, windows, and radio all work fine. But it won't start it makes a click noise but nothing. Then we thought it was the battery so we jumped it and now it won't even make no click noise at...


The "click" sound condition make us guess that could be a bad ignition switch or starter.

It turned out to be the starter. I first took the battery to have it tested and it was fine. Next, I took the starter apart and took it to Autozone to have it tested? and it was bad. It is not easy access to remove the starter. The intake manifold and exhaust system are in the way and need to be taken apart first. See instructions below:

- Take off Intake

- Take off Starter

Hope this helps (remember to rating this answer and leave some comment).

Sep 28, 2011 | 2003 Honda Element

1 Answer

My truck won't start, it makes a ticking noise


Check all the grounds....especially the ground from the battery to the frame.

May 20, 2011 | 1989 Dodge Ram 50

1 Answer

I replaced fuel pump and relay switch Sometimes when you turn key you can hear relay switch clicking and pump working then truck satarts, Runs fine . Try start it again and it just turns over , there's...


not knowing what kind of vehicle it is it is hard to tell. some gm cars and trucks have oil sending units that will not allow the vehicle to start unless it has oil pressure. they start going out and sometimes they start and sometimes they won"t.

Dec 08, 2010 | GMC Sonoma Cars & Trucks

1 Answer

95 F250 not starting


You said you tightened the battery cables, did you check the other end of the negative where it bolts to the engine. When you tightened the cables you also used a battery brush and cleaned the posts and ends?

Mar 27, 2010 | 1995 Ford F250

2 Answers

My 1996 Chevrolet Blazer won't start most of the time. Engine don't turn over, or the starter when I turn the key. All I can hear is some clicking coming from the carbarator & a humming noise under my...


The humming noise you hear is the fuel pump. It is probably your starter soleniod. If you hear an electric click under the dash near the steering column when you turn the key then the ignition switch is ok and your starter needs to be replaced. This happened to me last month.

Dec 08, 2009 | 1996 Chevrolet Blazer

3 Answers

Clicking noise when starting 99 Toyota Tacoma lights work, dashboard lit Any thoughts?


solenoids are worn out, it will probably eventually start after 4 or 5 clicks but its annoying as hell

Jul 26, 2008 | 1999 Toyota Tacoma PreRunner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...