Question about Cars & Trucks

Open Question

Valve cover nuts torque spec jaguar xj6

New gasket

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76164 Answers

SOURCE: 2001 jaguar S type v 6. I need to replace the Valve cover gasket.

Felpro brand gaskets are the best in the world, not sure about the intake, if it is in the way then yes remove it.

Posted on Sep 29, 2009

Ad
  • 24 Answers

SOURCE: 1996 Jaguar XJ6 - seeking toque spec for front hub bearing?

I can find no tourque setting, it is 'end float' set with a Dial Indicator, and the manual does not give a figgure for this either!

Posted on Mar 30, 2010

sammiamm9p
  • 43 Answers

SOURCE: Need valve cover torque specs for 2002 Kia Spectra

The torque specs for a Kia 1.8 valve cover is 43-78 inch pounds...... Basically just snug....

Posted on Nov 13, 2011

  • 641 Answers

SOURCE: What is the torque specs for 2002 Sonata 2.4 dohc valve cover bolts?

Valve cover bolts are in most cases reusable unless rounded off or striped. If the bolts are m6 89in/lbs should be good m8 105 in/lbs.

Posted on Feb 18, 2013

alicantecoli
  • 22156 Answers

SOURCE: Changing valve cover gasket

i don\'t know offhand but to be official around 14lbs. These are only little bolts, so a 3/8th rachet and two fingers about halfway down the handle will be the right torque .

Posted on Jun 30, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 Bmw x5 valve cover torque specs


valve cover gasket torque spec? - Bimmerforums

www.bimmerforums.com/.../showthread.php?...valve-cover...torque-spe...
Dec 7, 2012 - Remember the little rubber grommets around the cover bolts? ... Location: alabama; Posts: 5,537; My Cars: 2002 bmw 325 ... Torque spec for the M52 valve cover bolts is 89 inch-pounds / 7.4 ... 1976 - 1989 (E24) · 2004+ (E63, E64) ... 2012+ X1 (E84) · 2003+ X3 (E83,F25) · 1999+ X5, X6 (E53, E70, E71). Valve Cover Bolt Torque Specs
Oct 25, 2014
Valve cover screw torque specs?
Nov 9, 2012
leaking valve cover gasket
Dec 29, 2011
How specific for torque specs?
Dec 27, 2011
More results from www.bimmerforums.com

Nov 06, 2015 | Cars & Trucks

1 Answer

What is the torque specs for 2002 Sonata 2.4 dohc valve cover bolts?


Valve cover bolts are in most cases reusable unless rounded off or striped. If the bolts are m6 89in/lbs should be good m8 105 in/lbs.

Feb 18, 2013 | Hyundai Motor 2004 Sonata

1 Answer

Repair leaky valve cover


should be 4-5 nuts/bolts.
remove bolts, pull cover off. (pry edge with small screw driver if too tight or tap around sides with rubber mallet to loosen.
pull off all old gasket from cover and top seal area on head.

clean up all parts and wipe dry.

apply the new gasket. see image below.

make sure the 3 rings inside the cover are replaced, then reinstall.

do not over tighten. 12_11_2012_8_45_41_am.jpg
torque spec
1.8L engine - 43-78 in-lbs

1.9L engine - 50-100 in-lbs

2.0L SPI engine - 71-97 in-lbs

2.0 Zetec engine - 54-70 in-lbs

to convert from inch to foot pounds just divide by 12

Dec 11, 2012 | 1998 Ford Escort

1 Answer

Bolt torque sequence on 1991 jaguar xj6 4.0 intake manifold?


intake manifold or head gasket? i know head gasket need a sequential order followed by how many degrees and Lbs of pressure. if its on the intake i doubt it needs an specific torque. just try not to crack the intake manifold since its made of plastic.

Oct 29, 2012 | 1991 Jaguar XJ6

1 Answer

Need valve cover torque specs for 2002 Kia Spectra


The torque specs for a Kia 1.8 valve cover is 43-78 inch pounds...... Basically just snug....

Nov 13, 2011 | Cars & Trucks

1 Answer

HOW TO FIX A BLOWN HEAD GASKIT?


Buy a gasket kit for the upper end. Remove the valve cover intake and exhaust manifolds. Remove the head bolts. Remove head and clean up block from old gasket material. Take the head to a machinist and make sure that it is not warped. If it is warped either replace the head with a new one or have it machined true. Install new gasket and get torque specs with new head bolts and follow torque sequence using the correct torque specs. Clean exhaust, intake and valve cover of old gaskets. install new gaskets and torque according to specifications.

Nov 27, 2010 | 1993 Jeep Cherokee Country

1 Answer

Oil all around spark plugs and wires 1995 4.0 jag sedan


the valve cover gasket is probably leaking into the spark plug wells replace the gasket and the plug well seals if they are seperate from the valve cover gasket

Apr 05, 2010 | 1995 Jaguar XJ6

2 Answers

2001 jaguar S type v 6. I need to replace the valve cover gasket. Does any one have the torque sequence and torque values for the bolts?


Felpro brand gaskets are the best in the world, not sure about the intake, if it is in the way then yes remove it.

Sep 29, 2009 | 2002 Jaguar S-Type

2 Answers

1996 Jaguar XJ6 - seeking toque spec for front hub bearing?


They are taper roller bearings, when new something like 8 or 10 pound feet, used ones tigten until only a little play exists (if you have steel wheels leave the wheel on and it is easy to feel the play even if packed with fresh grease) If you overtighten they will growl and overheat and fail

May 23, 2009 | 1996 Jaguar Xj Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...